Filtered by vendor Linux
Subscribe
Total
12249 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-27014 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethn ---truncated--- | |||||
| CVE-2024-27013 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f | |||||
| CVE-2024-27012 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: restore set elements when delete set fails From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] <TASK> [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] | |||||
| CVE-2024-27011 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak in map from abort path The delete set command does not rely on the transaction object for element removal, therefore, a combination of delete element + delete set from the abort path could result in restoring twice the refcount of the mapping. Check for inactive element in the next generation for the delete element command in the abort path, skip restoring state if next generation bit has been already cleared. This is similar to the activate logic using the set walk iterator. [ 6170.286929] ------------[ cut here ]------------ [ 6170.286939] WARNING: CPU: 6 PID: 790302 at net/netfilter/nf_tables_api.c:2086 nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287071] Modules linked in: [...] [ 6170.287633] CPU: 6 PID: 790302 Comm: kworker/6:2 Not tainted 6.9.0-rc3+ #365 [ 6170.287768] RIP: 0010:nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.287886] Code: df 48 8d 7d 58 e8 69 2e 3b df 48 8b 7d 58 e8 80 1b 37 df 48 8d 7d 68 e8 57 2e 3b df 48 8b 7d 68 e8 6e 1b 37 df 48 89 ef eb c4 <0f> 0b 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 0f [ 6170.287895] RSP: 0018:ffff888134b8fd08 EFLAGS: 00010202 [ 6170.287904] RAX: 0000000000000001 RBX: ffff888125bffb28 RCX: dffffc0000000000 [ 6170.287912] RDX: 0000000000000003 RSI: ffffffffa20298ab RDI: ffff88811ebe4750 [ 6170.287919] RBP: ffff88811ebe4700 R08: ffff88838e812650 R09: fffffbfff0623a55 [ 6170.287926] R10: ffffffff8311d2af R11: 0000000000000001 R12: ffff888125bffb10 [ 6170.287933] R13: ffff888125bffb10 R14: dead000000000122 R15: dead000000000100 [ 6170.287940] FS: 0000000000000000(0000) GS:ffff888390b00000(0000) knlGS:0000000000000000 [ 6170.287948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6170.287955] CR2: 00007fd31fc00710 CR3: 0000000133f60004 CR4: 00000000001706f0 [ 6170.287962] Call Trace: [ 6170.287967] <TASK> [ 6170.287973] ? __warn+0x9f/0x1a0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.287986] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288092] ? report_bug+0x1b1/0x1e0 [ 6170.288104] ? handle_bug+0x3c/0x70 [ 6170.288112] ? exc_invalid_op+0x17/0x40 [ 6170.288120] ? asm_exc_invalid_op+0x1a/0x20 [ 6170.288132] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288243] ? nf_tables_chain_destroy+0x1f7/0x220 [nf_tables] [ 6170.288366] ? nf_tables_chain_destroy+0x2b/0x220 [nf_tables] [ 6170.288483] nf_tables_trans_destroy_work+0x588/0x590 [nf_tables] | |||||
| CVE-2024-27010 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. | |||||
| CVE-2024-27009 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: fix race condition during online processing A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV. The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated. Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state. Note that since: commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring. | |||||
| CVE-2024-27008 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-27007 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE Commit d7a08838ab74 ("mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to after clearing the page-table and ensuring that it's not pinned. This avoids failure of swapout+migration and possibly memory corruption. However, the commit missed fixing it in the huge-page case. | |||||
| CVE-2024-27006 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up() The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Cc :6.8+ <stable@vger.kernel.org> # 6.8+ | |||||
| CVE-2024-27005 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 6.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Don't access req_list while it's being manipulated The icc_lock mutex was split into separate icc_lock and icc_bw_lock mutexes in [1] to avoid lockdep splats. However, this didn't adequately protect access to icc_node::req_list. The icc_set_bw() function will eventually iterate over req_list while only holding icc_bw_lock, but req_list can be modified while only holding icc_lock. This causes races between icc_set_bw(), of_icc_get(), and icc_put(). Example A: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); icc_put(path_b) mutex_lock(&icc_lock); aggregate_requests() hlist_for_each_entry(r, ... hlist_del(... <r = invalid pointer> Example B: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); path_b = of_icc_get() of_icc_get_by_index() mutex_lock(&icc_lock); path_find() path_init() aggregate_requests() hlist_for_each_entry(r, ... hlist_add_head(... <r = invalid pointer> Fix this by ensuring icc_bw_lock is always held before manipulating icc_node::req_list. The additional places icc_bw_lock is held don't perform any memory allocations, so we should still be safe from the original lockdep splats that motivated the separate locks. [1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") | |||||
| CVE-2024-27003 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: Get runtime PM before walking tree for clk_summary Similar to the previous commit, we should make sure that all devices are runtime resumed before printing the clk_summary through debugfs. Failure to do so would result in a deadlock if the thread is resuming a device to print clk state and that device is also runtime resuming in another thread, e.g the screen is turning on and the display driver is starting up. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. This also squashes a bug where the return value of clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow on error paths. | |||||
| CVE-2024-27002 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Do a runtime PM get on controllers during probe mt8183-mfgcfg has a mutual dependency with genpd during the probing stage, which leads to a deadlock in the following call stack: CPU0: genpd_lock --> clk_prepare_lock genpd_power_off_work_fn() genpd_lock() generic_pm_domain::power_off() clk_unprepare() clk_prepare_lock() CPU1: clk_prepare_lock --> genpd_lock clk_register() __clk_core_init() clk_prepare_lock() clk_pm_runtime_get() genpd_lock() Do a runtime PM get at the probe function to make sure clk_register() won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg, do this on all mediatek clock controller probings because we don't believe this would cause any regression. Verified on MT8183 and MT8192 Chromebooks. | |||||
| CVE-2024-26999 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial/pmac_zilog: Remove flawed mitigation for rx irq flood The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. | |||||
| CVE-2024-26998 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: Clearing the circular buffer before NULLifying it The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port. | |||||
| CVE-2024-26996 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled. After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled. As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL. And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object. Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory. [function unlink via configfs] usb0: eth_stop dev->port_usb=ffffff9b179c3200 --> error happens in usb_ep_enable(). NCM: ncm_disable: ncm=ffffff9b179c3200 --> no gether_disconnect() since ncm->port.in_ep->enabled is false. NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200 NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm [function link via configfs] NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000 NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000 NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0 usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit() --> dev->wrap() Unable to handle kernel paging request at virtual address dead00000000014f This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established. | |||||
| CVE-2024-26995 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Correct the PDO counting in pd_set Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets. | |||||
| CVE-2024-26993 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL. | |||||
| CVE-2024-26992 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/pmu: Disable support for adaptive PEBS Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug #1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug #4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. | |||||
| CVE-2024-26991 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger KASAN splat, as seen in the private_mem_conversions_test selftest. When memory attributes are set on a GFN range, that range will have specific properties applied to the TDP. A huge page cannot be used when the attributes are inconsistent, so they are disabled for those the specific huge pages. For internal KVM reasons, huge pages are also not allowed to span adjacent memslots regardless of whether the backing memory could be mapped as huge. What GFNs support which huge page sizes is tracked by an array of arrays 'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of lpage_info contains a vmalloc allocated array of these for a specific supported page size. The kvm_lpage_info denotes whether a specific huge page (GFN and page size) on the memslot is supported. These arrays include indices for unaligned head and tail huge pages. Preventing huge pages from spanning adjacent memslot is covered by incrementing the count in head and tail kvm_lpage_info when the memslot is allocated, but disallowing huge pages for memory that has mixed attributes has to be done in a more complicated way. During the KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in the range that has mismatched attributes. KVM does this a memslot at a time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info for any huge page. This bit is essentially a permanently elevated count. So huge pages will not be mapped for the GFN at that page size if the count is elevated in either case: a huge head or tail page unaligned to the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed attributes. To determine whether a huge page has consistent attributes, the KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it consistently has the incoming attribute. Since level - 1 huge pages are aligned to level huge pages, it employs an optimization. As long as the level - 1 huge pages are checked first, it can just check these and assume that if each level - 1 huge page contained within the level sized huge page is not mixed, then the level size huge page is not mixed. This optimization happens in the helper hugepage_has_attrs(). Unfortunately, although the kvm_lpage_info array representing page size 'level' will contain an entry for an unaligned tail page of size level, the array for level - 1 will not contain an entry for each GFN at page size level. The level - 1 array will only contain an index for any unaligned region covered by level - 1 huge page size, which can be a smaller region. So this causes the optimization to overflow the level - 1 kvm_lpage_info and perform a vmalloc out of bounds read. In some cases of head and tail pages where an overflow could happen, callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not required to prevent huge pages as discussed earlier. But for memslots that are smaller than the 1GB page size, it does call hugepage_has_attrs(). In this case the huge page is both the head and tail page. The issue can be observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and running the selftest “private_mem_conversions_test”, which produces the output like the following: BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110 Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169 Call Trace: dump_stack_lvl print_report ? __virt_addr_valid ? hugepage_has_attrs ? hugepage_has_attrs kasan_report ? hugepage_has_attrs hugepage_has_attrs kvm_arch_post_set_memory_attributes kvm_vm_ioctl It is a little ambiguous whether the unaligned head page (in the bug case also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set. It is not functionally required, as the unal ---truncated--- | |||||
| CVE-2024-26990 | 1 Linux | 1 Linux Kernel | 2025-11-04 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Write-protect L2 SPTEs in TDP MMU when clearing dirty status Check kvm_mmu_page_ad_need_write_protect() when deciding whether to write-protect or clear D-bits on TDP MMU SPTEs, so that the TDP MMU accounts for any role-specific reasons for disabling D-bit dirty logging. Specifically, TDP MMU SPTEs must be write-protected when the TDP MMU is being used to run an L2 (i.e. L1 has disabled EPT) and PML is enabled. KVM always disables PML when running L2, even when L1 and L2 GPAs are in the some domain, so failing to write-protect TDP MMU SPTEs will cause writes made by L2 to not be reflected in the dirty log. [sean: massage shortlog and changelog, tweak ternary op formatting] | |||||