Filtered by vendor Linux
Subscribe
Total
11903 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49606 | 1 Linux | 1 Linux Kernel | 2025-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix sleep from invalid context BUG Taking the qos_mutex to process RoCEv2 QP's on netdev events causes a kernel splat. Fix this by removing the handling for RoCEv2 in irdma_cm_teardown_connections that uses the mutex. This handling is only needed for iWARP to avoid having connections established while the link is down or having connections remain functional after the IP address is removed. BUG: sleeping function called from invalid context at kernel/locking/mutex. Call Trace: kernel: dump_stack+0x66/0x90 kernel: ___might_sleep.cold.92+0x8d/0x9a kernel: mutex_lock+0x1c/0x40 kernel: irdma_cm_teardown_connections+0x28e/0x4d0 [irdma] kernel: ? check_preempt_curr+0x7a/0x90 kernel: ? select_idle_sibling+0x22/0x3c0 kernel: ? select_task_rq_fair+0x94c/0xc90 kernel: ? irdma_exec_cqp_cmd+0xc27/0x17c0 [irdma] kernel: ? __wake_up_common+0x7a/0x190 kernel: irdma_if_notify+0x3cc/0x450 [irdma] kernel: ? sched_clock_cpu+0xc/0xb0 kernel: irdma_inet6addr_event+0xc6/0x150 [irdma] | |||||
| CVE-2022-49605 | 1 Linux | 1 Linux Kernel | 2025-10-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: igc: Reinstate IGC_REMOVED logic and implement it properly The initially merged version of the igc driver code (via commit 146740f9abc4, "igc: Add support for PF") contained the following IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors: u32 igc_rd32(struct igc_hw *hw, u32 reg) { u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr); u32 value = 0; if (IGC_REMOVED(hw_addr)) return ~value; value = readl(&hw_addr[reg]); /* reads should not return all F's */ if (!(~value) && (!reg || !(~readl(hw_addr)))) hw->hw_addr = NULL; return value; } And: #define wr32(reg, val) \ do { \ u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \ if (!IGC_REMOVED(hw_addr)) \ writel((val), &hw_addr[(reg)]); \ } while (0) E.g. igb has similar checks in its MMIO accessors, and has a similar macro E1000_REMOVED, which is implemented as follows: #define E1000_REMOVED(h) unlikely(!(h)) These checks serve to detect and take note of an 0xffffffff MMIO read return from the device, which can be caused by a PCIe link flap or some other kind of PCI bus error, and to avoid performing MMIO reads and writes from that point onwards. However, the IGC_REMOVED macro was not originally implemented: #ifndef IGC_REMOVED #define IGC_REMOVED(a) (0) #endif /* IGC_REMOVED */ This led to the IGC_REMOVED logic to be removed entirely in a subsequent commit (commit 3c215fb18e70, "igc: remove IGC_REMOVED function"), with the rationale that such checks matter only for virtualization and that igc does not support virtualization -- but a PCIe device can become detached even without virtualization being in use, and without proper checks, a PCIe bus error affecting an igc adapter will lead to various NULL pointer dereferences, as the first access after the error will set hw->hw_addr to NULL, and subsequent accesses will blindly dereference this now-NULL pointer. This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and implements IGC_REMOVED the way it is done for igb, by checking for the unlikely() case of hw_addr being NULL. This change prevents the oopses seen when a PCIe link flap occurs on an igc adapter. | |||||
| CVE-2024-58009 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: handle NULL sock pointer in l2cap_sock_alloc A NULL sock pointer is passed into l2cap_sock_alloc() when it is called from l2cap_sock_new_connection_cb() and the error handling paths should also be aware of it. Seemingly a more elegant solution would be to swap bt_sock_alloc() and l2cap_chan_create() calls since they are not interdependent to that moment but then l2cap_chan_create() adds the soon to be deallocated and still dummy-initialized channel to the global list accessible by many L2CAP paths. The channel would be removed from the list in short period of time but be a bit more straight-forward here and just check for NULL instead of changing the order of function calls. Found by Linux Verification Center (linuxtesting.org) with SVACE static analysis tool. | |||||
| CVE-2024-58014 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() In 'wlc_phy_iqcal_gainparams_nphy()', add gain range check to WARN() instead of possible out-of-bounds 'tbl_iqcal_gainparams_nphy' access. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-58015 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix for out-of bound access error Selfgen stats are placed in a buffer using print_array_to_buf_index() function. Array length parameter passed to the function is too big, resulting in possible out-of bound memory error. Decreasing buffer size by one fixes faulty upper bound of passed array. Discovered in coverity scan, CID 1600742 and CID 1600758 | |||||
| CVE-2024-58016 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: safesetid: check size of policy writes syzbot attempts to write a buffer with a large size to a sysfs entry with writes handled by handle_policy_update(), triggering a warning in kmalloc. Check the size specified for write buffers before allocating. [PM: subject tweak] | |||||
| CVE-2024-58018 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvkm: correctly calculate the available space of the GSP cmdq buffer r535_gsp_cmdq_push() waits for the available page in the GSP cmdq buffer when handling a large RPC request. When it sees at least one available page in the cmdq, it quits the waiting with the amount of free buffer pages in the queue. Unfortunately, it always takes the [write pointer, buf_size) as available buffer pages before rolling back and wrongly calculates the size of the data should be copied. Thus, it can overwrite the RPC request that GSP is currently reading, which causes GSP hang due to corrupted RPC request: [ 549.209389] ------------[ cut here ]------------ [ 549.214010] WARNING: CPU: 8 PID: 6314 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:116 r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.225678] Modules linked in: nvkm(E+) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) mlx5_ib(E) amd64_edac(E) edac_mce_amd(E) kvm_amd(E) ib_uverbs(E) kvm(E) ib_core(E) acpi_ipmi(E) ipmi_si(E) mxm_wmi(E) ipmi_devintf(E) rapl(E) i2c_piix4(E) wmi_bmof(E) joydev(E) ptdma(E) acpi_cpufreq(E) k10temp(E) pcspkr(E) ipmi_msghandler(E) xfs(E) libcrc32c(E) ast(E) i2c_algo_bit(E) crct10dif_pclmul(E) drm_shmem_helper(E) nvme_tcp(E) crc32_pclmul(E) ahci(E) drm_kms_helper(E) libahci(E) nvme_fabrics(E) crc32c_intel(E) nvme(E) cdc_ether(E) mlx5_core(E) nvme_core(E) usbnet(E) drm(E) libata(E) ccp(E) ghash_clmulni_intel(E) mii(E) t10_pi(E) mlxfw(E) sp5100_tco(E) psample(E) pci_hyperv_intf(E) wmi(E) dm_multipath(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) dm_mod(E) be2iscsi(E) bnx2i(E) cnic(E) uio(E) cxgb4i(E) cxgb4(E) tls(E) libcxgbi(E) libcxgb(E) qla4xxx(E) [ 549.225752] iscsi_boot_sysfs(E) iscsi_tcp(E) libiscsi_tcp(E) libiscsi(E) scsi_transport_iscsi(E) fuse(E) [last unloaded: gsp_log(E)] [ 549.326293] CPU: 8 PID: 6314 Comm: insmod Tainted: G E 6.9.0-rc6+ #1 [ 549.334039] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022 [ 549.341781] RIP: 0010:r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.347343] Code: 08 00 00 89 da c1 e2 0c 48 8d ac 11 00 10 00 00 48 8b 0c 24 48 85 c9 74 1f c1 e0 0c 4c 8d 6d 30 83 e8 30 89 01 e9 68 ff ff ff <0f> 0b 49 c7 c5 92 ff ff ff e9 5a ff ff ff ba ff ff ff ff be c0 0c [ 549.366090] RSP: 0018:ffffacbccaaeb7d0 EFLAGS: 00010246 [ 549.371315] RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000923e28 [ 549.378451] RDX: 0000000000000000 RSI: 0000000055555554 RDI: ffffacbccaaeb730 [ 549.385590] RBP: 0000000000000001 R08: ffff8bd14d235f70 R09: ffff8bd14d235f70 [ 549.392721] R10: 0000000000000002 R11: ffff8bd14d233864 R12: 0000000000000020 [ 549.399854] R13: ffffacbccaaeb818 R14: 0000000000000020 R15: ffff8bb298c67000 [ 549.406988] FS: 00007f5179244740(0000) GS:ffff8bd14d200000(0000) knlGS:0000000000000000 [ 549.415076] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 549.420829] CR2: 00007fa844000010 CR3: 00000001567dc005 CR4: 0000000000770ef0 [ 549.427963] PKRU: 55555554 [ 549.430672] Call Trace: [ 549.433126] <TASK> [ 549.435233] ? __warn+0x7f/0x130 [ 549.438473] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.443426] ? report_bug+0x18a/0x1a0 [ 549.447098] ? handle_bug+0x3c/0x70 [ 549.450589] ? exc_invalid_op+0x14/0x70 [ 549.454430] ? asm_exc_invalid_op+0x16/0x20 [ 549.458619] ? r535_gsp_msgq_wait+0xd0/0x190 [nvkm] [ 549.463565] r535_gsp_msg_recv+0x46/0x230 [nvkm] [ 549.468257] r535_gsp_rpc_push+0x106/0x160 [nvkm] [ 549.473033] r535_gsp_rpc_rm_ctrl_push+0x40/0x130 [nvkm] [ 549.478422] nvidia_grid_init_vgpu_types+0xbc/0xe0 [nvkm] [ 549.483899] nvidia_grid_init+0xb1/0xd0 [nvkm] [ 549.488420] ? srso_alias_return_thunk+0x5/0xfbef5 [ 549.493213] nvkm_device_pci_probe+0x305/0x420 [nvkm] [ 549.498338] local_pci_probe+0x46/ ---truncated--- | |||||
| CVE-2022-49592 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma queue left shift overflow issue When queue number is > 4, left shift overflows due to 32 bits integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1. If CONFIG_UBSAN is enabled, kernel dumps below warning: [ 10.363842] ================================================================== [ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/ linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12 [ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int' [ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg [ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021 [ 10.363958] Call Trace: [ 10.363960] <TASK> [ 10.363963] dump_stack_lvl+0x4a/0x5f [ 10.363971] dump_stack+0x10/0x12 [ 10.363974] ubsan_epilogue+0x9/0x45 [ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e [ 10.363979] ? wake_up_klogd+0x4a/0x50 [ 10.363983] ? vprintk_emit+0x8f/0x240 [ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac] [ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac] [ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac] [ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac] [ 10.364030] ? page_pool_alloc_pages+0x4d/0x70 [ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac] [ 10.364042] stmmac_open+0x39e/0x920 [stmmac] [ 10.364050] __dev_open+0xf0/0x1a0 [ 10.364054] __dev_change_flags+0x188/0x1f0 [ 10.364057] dev_change_flags+0x26/0x60 [ 10.364059] do_setlink+0x908/0xc40 [ 10.364062] ? do_setlink+0xb10/0xc40 [ 10.364064] ? __nla_validate_parse+0x4c/0x1a0 [ 10.364068] __rtnl_newlink+0x597/0xa10 [ 10.364072] ? __nla_reserve+0x41/0x50 [ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0 [ 10.364079] ? pskb_expand_head+0x75/0x310 [ 10.364082] ? nla_reserve_64bit+0x21/0x40 [ 10.364086] ? skb_free_head+0x65/0x80 [ 10.364089] ? security_sock_rcv_skb+0x2c/0x50 [ 10.364094] ? __cond_resched+0x19/0x30 [ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420 [ 10.364100] rtnl_newlink+0x49/0x70 This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue mapping warning. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195 | |||||
| CVE-2022-49584 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. | |||||
| CVE-2022-49581 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: be2net: Fix buffer overflow in be_get_module_eeprom be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once. | |||||
| CVE-2022-49565 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/lbr: Fix unchecked MSR access error on HSW The fuzzer triggers the below trace. [ 7763.384369] unchecked MSR access error: WRMSR to 0x689 (tried to write 0x1fffffff8101349e) at rIP: 0xffffffff810704a4 (native_write_msr+0x4/0x20) [ 7763.397420] Call Trace: [ 7763.399881] <TASK> [ 7763.401994] intel_pmu_lbr_restore+0x9a/0x1f0 [ 7763.406363] intel_pmu_lbr_sched_task+0x91/0x1c0 [ 7763.410992] __perf_event_task_sched_in+0x1cd/0x240 On a machine with the LBR format LBR_FORMAT_EIP_FLAGS2, when the TSX is disabled, a TSX quirk is required to access LBR from registers. The lbr_from_signext_quirk_needed() is introduced to determine whether the TSX quirk should be applied. However, the lbr_from_signext_quirk_needed() is invoked before the intel_pmu_lbr_init(), which parses the LBR format information. Without the correct LBR format information, the TSX quirk never be applied. Move the lbr_from_signext_quirk_needed() into the intel_pmu_lbr_init(). Checking x86_pmu.lbr_has_tsx in the lbr_from_signext_quirk_needed() is not required anymore. Both LBR_FORMAT_EIP_FLAGS2 and LBR_FORMAT_INFO have LBR_TSX flag, but only the LBR_FORMAT_EIP_FLAGS2 requirs the quirk. Update the comments accordingly. | |||||
| CVE-2022-49562 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits Use the recently introduced __try_cmpxchg_user() to update guest PTE A/D bits instead of mapping the PTE into kernel address space. The VM_PFNMAP path is broken as it assumes that vm_pgoff is the base pfn of the mapped VMA range, which is conceptually wrong as vm_pgoff is the offset relative to the file and has nothing to do with the pfn. The horrific hack worked for the original use case (backing guest memory with /dev/mem), but leads to accessing "random" pfns for pretty much any other VM_PFNMAP case. | |||||
| CVE-2025-59489 | 5 Apple, Google, Linux and 2 more | 5 Macos, Android, Linux Kernel and 2 more | 2025-10-22 | N/A | 7.4 HIGH |
| Unity Runtime before 2025-10-02 on Android, Windows, macOS, and Linux allows argument injection that can result in loading of library code from an unintended location. If an application was built with a version of Unity Editor that had the vulnerable Unity Runtime code, then an adversary may be able to execute code on, and exfiltrate confidential information from, the machine on which that application is running. NOTE: product status is provided for Unity Editor because that is the information available from the Supplier. However, updating Unity Editor typically does not address the effects of the vulnerability; instead, it is necessary to rebuild and redeploy all affected applications. | |||||
| CVE-2022-49553 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate BOOT sectors_per_clusters When the NTFS BOOT sectors_per_clusters field is > 0x80, it represents a shift value. Make sure that the shift value is not too large before using it (NTFS max cluster size is 2MB). Return -EVINVAL if it too large. This prevents negative shift values and shift values that are larger than the field size. Prevents this UBSAN error: UBSAN: shift-out-of-bounds in ../fs/ntfs3/super.c:673:16 shift exponent -192 is negative | |||||
| CVE-2022-49554 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: zsmalloc: fix races between asynchronous zspage free and page migration The asynchronous zspage free worker tries to lock a zspage's entire page list without defending against page migration. Since pages which haven't yet been locked can concurrently migrate off the zspage page list while lock_zspage() churns away, lock_zspage() can suffer from a few different lethal races. It can lock a page which no longer belongs to the zspage and unsafely dereference page_private(), it can unsafely dereference a torn pointer to the next page (since there's a data race), and it can observe a spurious NULL pointer to the next page and thus not lock all of the zspage's pages (since a single page migration will reconstruct the entire page list, and create_page_chain() unconditionally zeroes out each list pointer in the process). Fix the races by using migrate_read_lock() in lock_zspage() to synchronize with page migration. | |||||
| CVE-2022-49555 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Use del_timer_sync() before freeing While looking at a crash report on a timer list being corrupted, which usually happens when a timer is freed while still active. This is commonly triggered by code calling del_timer() instead of del_timer_sync() just before freeing. One possible culprit is the hci_qca driver, which does exactly that. Eric mentioned that wake_retrans_timer could be rearmed via the work queue, so also move the destruction of the work queue before del_timer_sync(). | |||||
| CVE-2022-49659 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. | |||||
| CVE-2022-49557 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build Not tainted 5.18.0-rc5-KASAN-amd64 #1 Hardware name: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010 Call Trace: <TASK> dump_stack_lvl+0x34/0x45 print_report.cold+0x45/0x575 kasan_report+0x9b/0xd0 fpu_copy_uabi_to_guest_fpstate+0x86/0x130 kvm_arch_vcpu_ioctl+0x72a/0x1c50 [kvm] kvm_vcpu_ioctl+0x47f/0x7b0 [kvm] __x64_sys_ioctl+0x5de/0xc90 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Allocated by task 0: (stack is not available) The buggy address belongs to the object at ffff888011e33800 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 0 bytes to the right of 512-byte region [ffff888011e33800, ffff888011e33a00) The buggy address belongs to the physical page: page:0000000089cd4adb refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e30 head:0000000089cd4adb order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=1) raw: 4000000000010200 dead000000000100 dead000000000122 ffff888001041c80 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e33900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888011e33980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888011e33a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888011e33a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888011e33b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint | |||||
| CVE-2022-49424 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix NULL pointer dereference when printing dev_name When larbdev is NULL (in the case I hit, the node is incorrectly set iommus = <&iommu NUM>), it will cause device_link_add() fail and kernel crashes when we try to print dev_name(larbdev). Let's fail the probe if a larbdev is NULL to avoid invalid inputs from dts. It should work for normal correct setting and avoid the crash caused by my incorrect setting. Error log: [ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 ... [ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO) [ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] [ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu] [ 18.346884][ T301] sp : ffffffc00a5635e0 [ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8 [ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38 [ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38 [ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38 [ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000 [ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0 [ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004 [ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420 [ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003 [ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2 [ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00 [ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000 [ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005 [ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000 [ 18.360208][ T301] Hardware name: MT6873 (DT) [ 18.360771][ T301] Call trace: [ 18.361168][ T301] dump_backtrace+0xf8/0x1f0 [ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c [ 18.362305][ T301] dump_stack+0x1c/0x2c [ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump] [ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump] [ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8 [ 18.364937][ T301] die+0x16c/0x568 [ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214 [ 18.365402][ T301] do_page_fault+0xb8/0x678 [ 18.366934][ T301] do_translation_fault+0x48/0x64 [ 18.368645][ T301] do_mem_abort+0x68/0x148 [ 18.368652][ T301] el1_abort+0x40/0x64 [ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88 [ 18.368668][ T301] el1h_64_sync+0x68/0x6c [ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] ... | |||||
| CVE-2022-49425 | 1 Linux | 1 Linux Kernel | 2025-10-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set. | |||||