Filtered by vendor Linux
Subscribe
Total
10574 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26828 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 6.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix underflow in parse_server_interfaces() In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that "bytes_left" is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending. | |||||
| CVE-2022-4379 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2025-04-08 | N/A | 7.5 HIGH |
| A use-after-free vulnerability was found in __nfs42_ssc_open() in fs/nfs/nfs4file.c in the Linux kernel. This flaw allows an attacker to conduct a remote denial | |||||
| CVE-2024-26915 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Reset IH OVERFLOW_CLEAR bit Allows us to detect subsequent IH ring buffer overflows as well. | |||||
| CVE-2024-26939 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/vma: Fix UAF on destroy against retire race Object debugging tools were sporadically reporting illegal attempts to free a still active i915 VMA object when parking a GT believed to be idle. [161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915] [161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0 ... [161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1 [161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022 [161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915] [161.360592] RIP: 0010:debug_print_object+0x80/0xb0 ... [161.361347] debug_object_free+0xeb/0x110 [161.361362] i915_active_fini+0x14/0x130 [i915] [161.361866] release_references+0xfe/0x1f0 [i915] [161.362543] i915_vma_parked+0x1db/0x380 [i915] [161.363129] __gt_park+0x121/0x230 [i915] [161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915] That has been tracked down to be happening when another thread is deactivating the VMA inside __active_retire() helper, after the VMA's active counter has been already decremented to 0, but before deactivation of the VMA's object is reported to the object debugging tool. We could prevent from that race by serializing i915_active_fini() with __active_retire() via ref->tree_lock, but that wouldn't stop the VMA from being used, e.g. from __i915_vma_retire() called at the end of __active_retire(), after that VMA has been already freed by a concurrent i915_vma_destroy() on return from the i915_active_fini(). Then, we should rather fix the issue at the VMA level, not in i915_active. Since __i915_vma_parked() is called from __gt_park() on last put of the GT's wakeref, the issue could be addressed by holding the GT wakeref long enough for __active_retire() to complete before that wakeref is released and the GT parked. I believe the issue was introduced by commit d93939730347 ("drm/i915: Remove the vma refcount") which moved a call to i915_active_fini() from a dropped i915_vma_release(), called on last put of the removed VMA kref, to i915_vma_parked() processing path called on last put of a GT wakeref. However, its visibility to the object debugging tool was suppressed by a bug in i915_active that was fixed two weeks later with commit e92eb246feb9 ("drm/i915/active: Fix missing debug object activation"). A VMA associated with a request doesn't acquire a GT wakeref by itself. Instead, it depends on a wakeref held directly by the request's active intel_context for a GT associated with its VM, and indirectly on that intel_context's engine wakeref if the engine belongs to the same GT as the VMA's VM. Those wakerefs are released asynchronously to VMA deactivation. Fix the issue by getting a wakeref for the VMA's GT when activating it, and putting that wakeref only after the VMA is deactivated. However, exclude global GTT from that processing path, otherwise the GPU never goes idle. Since __i915_vma_retire() may be called from atomic contexts, use async variant of wakeref put. Also, to avoid circular locking dependency, take care of acquiring the wakeref before VM mutex when both are needed. v7: Add inline comments with justifications for: - using untracked variants of intel_gt_pm_get/put() (Nirmoy), - using async variant of _put(), - not getting the wakeref in case of a global GTT, - always getting the first wakeref outside vm->mutex. v6: Since __i915_vma_active/retire() callbacks are not serialized, storing a wakeref tracking handle inside struct i915_vma is not safe, and there is no other good place for that. Use untracked variants of intel_gt_pm_get/put_async(). v5: Replace "tile" with "GT" across commit description (Rodrigo), - ---truncated--- | |||||
| CVE-2024-27073 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations. | |||||
| CVE-2024-26976 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Always flush async #PF workqueue when vCPU is being destroyed Always flush the per-vCPU async #PF workqueue when a vCPU is clearing its completion queue, e.g. when a VM and all its vCPUs is being destroyed. KVM must ensure that none of its workqueue callbacks is running when the last reference to the KVM _module_ is put. Gifting a reference to the associated VM prevents the workqueue callback from dereferencing freed vCPU/VM memory, but does not prevent the KVM module from being unloaded before the callback completes. Drop the misguided VM refcount gifting, as calling kvm_put_kvm() from async_pf_execute() if kvm_put_kvm() flushes the async #PF workqueue will result in deadlock. async_pf_execute() can't return until kvm_put_kvm() finishes, and kvm_put_kvm() can't return until async_pf_execute() finishes: WARNING: CPU: 8 PID: 251 at virt/kvm/kvm_main.c:1435 kvm_put_kvm+0x2d/0x320 [kvm] Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel kvm irqbypass CPU: 8 PID: 251 Comm: kworker/8:1 Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events async_pf_execute [kvm] RIP: 0010:kvm_put_kvm+0x2d/0x320 [kvm] Call Trace: <TASK> async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> ---[ end trace 0000000000000000 ]--- INFO: task kworker/8:1:251 blocked for more than 120 seconds. Tainted: G W 6.6.0-rc1-e7af8d17224a-x86/gmem-vm #119 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:1 state:D stack:0 pid:251 ppid:2 flags:0x00004000 Workqueue: events async_pf_execute [kvm] Call Trace: <TASK> __schedule+0x33f/0xa40 schedule+0x53/0xc0 schedule_timeout+0x12a/0x140 __wait_for_common+0x8d/0x1d0 __flush_work.isra.0+0x19f/0x2c0 kvm_clear_async_pf_completion_queue+0x129/0x190 [kvm] kvm_arch_destroy_vm+0x78/0x1b0 [kvm] kvm_put_kvm+0x1c1/0x320 [kvm] async_pf_execute+0x198/0x260 [kvm] process_one_work+0x145/0x2d0 worker_thread+0x27e/0x3a0 kthread+0xba/0xe0 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 </TASK> If kvm_clear_async_pf_completion_queue() actually flushes the workqueue, then there's no need to gift async_pf_execute() a reference because all invocations of async_pf_execute() will be forced to complete before the vCPU and its VM are destroyed/freed. And that in turn fixes the module unloading bug as __fput() won't do module_put() on the last vCPU reference until the vCPU has been freed, e.g. if closing the vCPU file also puts the last reference to the KVM module. Note that kvm_check_async_pf_completion() may also take the work item off the completion queue and so also needs to flush the work queue, as the work will not be seen by kvm_clear_async_pf_completion_queue(). Waiting on the workqueue could theoretically delay a vCPU due to waiting for the work to complete, but that's a very, very small chance, and likely a very small delay. kvm_arch_async_page_present_queued() unconditionally makes a new request, i.e. will effectively delay entering the guest, so the remaining work is really just: trace_kvm_async_pf_completed(addr, cr2_or_gpa); __kvm_vcpu_wake_up(vcpu); mmput(mm); and mmput() can't drop the last reference to the page tables if the vCPU is still alive, i.e. the vCPU won't get stuck tearing down page tables. Add a helper to do the flushing, specifically to deal with "wakeup all" work items, as they aren't actually work items, i.e. are never placed in a workqueue. Trying to flush a bogus workqueue entry rightly makes __flush_work() complain (kudos to whoever added that sanity check). Note, commit 5f6de5cbebee ("KVM: Prevent module exit until al ---truncated--- | |||||
| CVE-2024-26980 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf If ->ProtocolId is SMB2_TRANSFORM_PROTO_NUM, smb2 request size validation could be skipped. if request size is smaller than sizeof(struct smb2_query_info_req), slab-out-of-bounds read can happen in smb2_allocate_rsp_buf(). This patch allocate response buffer after decrypting transform request. smb3_decrypt_req() will validate transform request size and avoid slab-out-of-bound in smb2_allocate_rsp_buf(). | |||||
| CVE-2024-26984 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nouveau: fix instmem race condition around ptr stores Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. | |||||
| CVE-2024-26991 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger KASAN splat, as seen in the private_mem_conversions_test selftest. When memory attributes are set on a GFN range, that range will have specific properties applied to the TDP. A huge page cannot be used when the attributes are inconsistent, so they are disabled for those the specific huge pages. For internal KVM reasons, huge pages are also not allowed to span adjacent memslots regardless of whether the backing memory could be mapped as huge. What GFNs support which huge page sizes is tracked by an array of arrays 'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of lpage_info contains a vmalloc allocated array of these for a specific supported page size. The kvm_lpage_info denotes whether a specific huge page (GFN and page size) on the memslot is supported. These arrays include indices for unaligned head and tail huge pages. Preventing huge pages from spanning adjacent memslot is covered by incrementing the count in head and tail kvm_lpage_info when the memslot is allocated, but disallowing huge pages for memory that has mixed attributes has to be done in a more complicated way. During the KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in the range that has mismatched attributes. KVM does this a memslot at a time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info for any huge page. This bit is essentially a permanently elevated count. So huge pages will not be mapped for the GFN at that page size if the count is elevated in either case: a huge head or tail page unaligned to the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed attributes. To determine whether a huge page has consistent attributes, the KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it consistently has the incoming attribute. Since level - 1 huge pages are aligned to level huge pages, it employs an optimization. As long as the level - 1 huge pages are checked first, it can just check these and assume that if each level - 1 huge page contained within the level sized huge page is not mixed, then the level size huge page is not mixed. This optimization happens in the helper hugepage_has_attrs(). Unfortunately, although the kvm_lpage_info array representing page size 'level' will contain an entry for an unaligned tail page of size level, the array for level - 1 will not contain an entry for each GFN at page size level. The level - 1 array will only contain an index for any unaligned region covered by level - 1 huge page size, which can be a smaller region. So this causes the optimization to overflow the level - 1 kvm_lpage_info and perform a vmalloc out of bounds read. In some cases of head and tail pages where an overflow could happen, callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not required to prevent huge pages as discussed earlier. But for memslots that are smaller than the 1GB page size, it does call hugepage_has_attrs(). In this case the huge page is both the head and tail page. The issue can be observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and running the selftest “private_mem_conversions_test”, which produces the output like the following: BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110 Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169 Call Trace: dump_stack_lvl print_report ? __virt_addr_valid ? hugepage_has_attrs ? hugepage_has_attrs kasan_report ? hugepage_has_attrs hugepage_has_attrs kvm_arch_post_set_memory_attributes kvm_vm_ioctl It is a little ambiguous whether the unaligned head page (in the bug case also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set. It is not functionally required, as the unal ---truncated--- | |||||
| CVE-2024-27005 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 6.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: interconnect: Don't access req_list while it's being manipulated The icc_lock mutex was split into separate icc_lock and icc_bw_lock mutexes in [1] to avoid lockdep splats. However, this didn't adequately protect access to icc_node::req_list. The icc_set_bw() function will eventually iterate over req_list while only holding icc_bw_lock, but req_list can be modified while only holding icc_lock. This causes races between icc_set_bw(), of_icc_get(), and icc_put(). Example A: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); icc_put(path_b) mutex_lock(&icc_lock); aggregate_requests() hlist_for_each_entry(r, ... hlist_del(... <r = invalid pointer> Example B: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); path_b = of_icc_get() of_icc_get_by_index() mutex_lock(&icc_lock); path_find() path_init() aggregate_requests() hlist_for_each_entry(r, ... hlist_add_head(... <r = invalid pointer> Fix this by ensuring icc_bw_lock is always held before manipulating icc_node::req_list. The additional places icc_bw_lock is held don't perform any memory allocations, so we should still be safe from the original lockdep splats that motivated the separate locks. [1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") | |||||
| CVE-2022-48669 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix potential memleak in papr_get_attr() `buf` is allocated in papr_get_attr(), and krealloc() of `buf` could fail. We need to free the original `buf` in the case of failure. | |||||
| CVE-2023-52653 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix a memleak in gss_import_v2_context The ctx->mech_used.data allocated by kmemdup is not freed in neither gss_import_v2_context nor it only caller gss_krb5_import_sec_context, which frees ctx on error. Thus, this patch reform the last call of gss_import_v2_context to the gss_krb5_import_ctx_v2, preventing the memleak while keepping the return formation. | |||||
| CVE-2024-27028 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 6.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-mt65xx: Fix NULL pointer access in interrupt handler The TX buffer in spi_transfer can be a NULL pointer, so the interrupt handler may end up writing to the invalid memory and cause crashes. Add a check to trans->tx_buf before using it. | |||||
| CVE-2024-27032 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 6.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential panic during recovery During recovery, if FAULT_BLOCK is on, it is possible that f2fs_reserve_new_block() will return -ENOSPC during recovery, then it may trigger panic. Also, if fault injection rate is 1 and only FAULT_BLOCK fault type is on, it may encounter deadloop in loop of block reservation. Let's change as below to fix these issues: - remove bug_on() to avoid panic. - limit the loop count of block reservation to avoid potential deadloop. | |||||
| CVE-2024-27037 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynq: Prevent null pointer dereference caused by kmalloc failure The kmalloc() in zynq_clk_setup() will return null if the physical memory has run out. As a result, if we use snprintf() to write data to the null address, the null pointer dereference bug will happen. This patch uses a stack variable to replace the kmalloc(). | |||||
| CVE-2024-27040 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add 'replay' NULL check in 'edp_set_replay_allow_active()' In the first if statement, we're checking if 'replay' is NULL. But in the second if statement, we're not checking if 'replay' is NULL again before calling replay->funcs->replay_set_power_opt(). if (replay == NULL && force_static) return false; ... if (link->replay_settings.replay_feature_enabled && replay->funcs->replay_set_power_opt) { replay->funcs->replay_set_power_opt(replay, *power_opts, panel_inst); link->replay_settings.replay_power_opt_active = *power_opts; } If 'replay' is NULL, this will cause a null pointer dereference. Fixes the below found by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c:895 edp_set_replay_allow_active() error: we previously assumed 'replay' could be null (see line 887) | |||||
| CVE-2024-27041 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix NULL checks for adev->dm.dc in amdgpu_dm_fini() Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL before the call to dc_enable_dmub_notifications(), check beforehand to ensure there will not be a possible NULL-ptr-deref there. Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in 'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy(). Clean up by combining them all under one 'if'. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. | |||||
| CVE-2024-27050 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: libbpf: Use OPTS_SET() macro in bpf_xdp_query() When the feature_flags and xdp_zc_max_segs fields were added to the libbpf bpf_xdp_query_opts, the code writing them did not use the OPTS_SET() macro. This causes libbpf to write to those fields unconditionally, which means that programs compiled against an older version of libbpf (with a smaller size of the bpf_xdp_query_opts struct) will have its stack corrupted by libbpf writing out of bounds. The patch adding the feature_flags field has an early bail out if the feature_flags field is not part of the opts struct (via the OPTS_HAS) macro, but the patch adding xdp_zc_max_segs does not. For consistency, this fix just changes the assignments to both fields to use the OPTS_SET() macro. | |||||
| CVE-2022-3977 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 7.8 HIGH |
| A use-after-free flaw was found in the Linux kernel MCTP (Management Component Transport Protocol) functionality. This issue occurs when a user simultaneously calls DROPTAG ioctl and socket close happens, which could allow a local user to crash the system or potentially escalate their privileges on the system. | |||||
| CVE-2024-27405 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. | |||||