Total
626 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-57905 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1119: fix information leak in triggered buffer The 'scan' local struct is used to push data to user space from a triggered buffer, but it has a hole between the sample (unsigned int) and the timestamp. This hole is never initialized. Initialize the struct to zero before using it to avoid pushing uninitialized information to userspace. | |||||
| CVE-2024-57878 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 6.1 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | |||||
| CVE-2024-57877 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 6.1 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_POE Currently poe_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written back to target->thread.por_el0, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing contents of POR_EL1 will be retained. Before this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0xffff8000839c3d50 After this patch: | # ./poe-test | Attempting to write NT_ARM_POE::por_el0 = 0x900d900d900d900d | SETREGSET(nt=0x40f, len=8) wrote 8 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | | Attempting to write NT_ARM_POE (zero length) | SETREGSET(nt=0x40f, len=0) wrote 0 bytes | | Attempting to read NT_ARM_POE::por_el0 | GETREGSET(nt=0x40f, len=8) read 8 bytes | Read NT_ARM_POE::por_el0 = 0x900d900d900d900d | |||||
| CVE-2022-49567 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy(). | |||||
| CVE-2022-49507 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9121: Fix uninit-value in da9121_assign_chip_model() KASAN report slab-out-of-bounds in __regmap_init as follows: BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841 Read of size 1 at addr ffff88803678cdf1 by task xrun/9137 CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88 print_report.cold+0xcd/0x69b mm/kasan/report.c:313 kasan_report+0x8e/0xc0 mm/kasan/report.c:491 __regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841 __devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266 __devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394 da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039 i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563 This happend when da9121 device is probe by da9121_i2c_id, but with invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later da9121_assign_chip_model() will access 'regmap' without init it. Fix it by return -EINVAL from da9121_assign_chip_model() if 'chip->subvariant_id' is invalid. | |||||
| CVE-2022-49374 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tipc: check attribute length for bearer name syzbot reported uninit-value: ===================================================== BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:644 [inline] BUG: KMSAN: uninit-value in string+0x4f9/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:644 [inline] string+0x4f9/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 vprintk_default+0x86/0xa0 kernel/printk/printk.c:2283 vprintk+0x15f/0x180 kernel/printk/printk_safe.c:50 _printk+0x18d/0x1cf kernel/printk/printk.c:2293 tipc_enable_bearer net/tipc/bearer.c:371 [inline] __tipc_nl_bearer_enable+0x2022/0x22a0 net/tipc/bearer.c:1033 tipc_nl_bearer_enable+0x6c/0xb0 net/tipc/bearer.c:1042 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] - Do sanity check the attribute length for TIPC_NLA_BEARER_NAME. - Do not use 'illegal name' in printing message. | |||||
| CVE-2022-49326 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rtl818x: Prevent using not initialized queues Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum: https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start-25.html He also confirmed that this patch fixes the issue. In summary this happened: After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10. Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards. rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries "ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized. | |||||
| CVE-2022-49301 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in usb_read8() and friends When r8712_usbctrl_vendorreq() returns negative, 'data' in usb_read{8,16,32} will not be initialized. BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:643 [inline] BUG: KMSAN: uninit-value in string+0x4ec/0x6f0 lib/vsprintf.c:725 string_nocheck lib/vsprintf.c:643 [inline] string+0x4ec/0x6f0 lib/vsprintf.c:725 vsnprintf+0x2222/0x3650 lib/vsprintf.c:2806 va_format lib/vsprintf.c:1704 [inline] pointer+0x18e6/0x1f70 lib/vsprintf.c:2443 vsnprintf+0x1a9b/0x3650 lib/vsprintf.c:2810 vprintk_store+0x537/0x2150 kernel/printk/printk.c:2158 vprintk_emit+0x28b/0xab0 kernel/printk/printk.c:2256 dev_vprintk_emit+0x5ef/0x6d0 drivers/base/core.c:4604 dev_printk_emit+0x1dd/0x21f drivers/base/core.c:4615 __dev_printk+0x3be/0x440 drivers/base/core.c:4627 _dev_info+0x1ea/0x22f drivers/base/core.c:4673 r871xu_drv_init+0x1929/0x3070 drivers/staging/rtl8712/usb_intf.c:401 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x6c7/0x1350 drivers/base/dd.c:621 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b91/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5363 [inline] hub_port_connect_change drivers/usb/core/hub.c:5507 [inline] port_event drivers/usb/core/hub.c:5665 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5747 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2289 worker_thread+0x10d0/0x2240 kernel/workqueue.c:2436 kthread+0x3c7/0x500 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Local variable data created at: usb_read8+0x5d/0x130 drivers/staging/rtl8712/usb_ops.c:33 r8712_read8+0xa5/0xd0 drivers/staging/rtl8712/rtl8712_io.c:29 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 | |||||
| CVE-2022-49298 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix uninit-value in r871xu_drv_init() When 'tmpU1b' returns from r8712_read8(padapter, EE_9346CR) is 0, 'mac[6]' will not be initialized. BUG: KMSAN: uninit-value in r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 r871xu_drv_init+0x2d54/0x3070 drivers/staging/rtl8712/usb_intf.c:541 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_set_configuration+0x37e9/0x3ed0 drivers/usb/core/message.c:2170 usb_generic_driver_probe+0x13c/0x300 drivers/usb/core/generic.c:238 usb_probe_device+0x309/0x570 drivers/usb/core/driver.c:293 really_probe+0x653/0x14b0 drivers/base/dd.c:596 __driver_probe_device+0x3e9/0x530 drivers/base/dd.c:752 driver_probe_device drivers/base/dd.c:782 [inline] __device_attach_driver+0x79f/0x1120 drivers/base/dd.c:899 bus_for_each_drv+0x2d6/0x3f0 drivers/base/bus.c:427 __device_attach+0x593/0x8e0 drivers/base/dd.c:970 device_initial_probe+0x4a/0x60 drivers/base/dd.c:1017 bus_probe_device+0x17b/0x3e0 drivers/base/bus.c:487 device_add+0x1fff/0x26e0 drivers/base/core.c:3405 usb_new_device+0x1b8e/0x2950 drivers/usb/core/hub.c:2566 hub_port_connect drivers/usb/core/hub.c:5358 [inline] hub_port_connect_change drivers/usb/core/hub.c:5502 [inline] port_event drivers/usb/core/hub.c:5660 [inline] hub_event+0x58e3/0x89e0 drivers/usb/core/hub.c:5742 process_one_work+0xdb6/0x1820 kernel/workqueue.c:2307 worker_thread+0x10b3/0x21e0 kernel/workqueue.c:2454 kthread+0x3c7/0x500 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 Local variable mac created at: r871xu_drv_init+0x1771/0x3070 drivers/staging/rtl8712/usb_intf.c:394 usb_probe_interface+0xf19/0x1600 drivers/usb/core/driver.c:396 KMSAN: uninit-value in r871xu_drv_init https://syzkaller.appspot.com/bug?id=3cd92b1d85428b128503bfa7a250294c9ae00bd8 | |||||
| CVE-2022-49235 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ath9k_htc: fix uninit value bugs Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing field initialization. In htc_connect_service() svc_meta_len and pad are not initialized. Based on code it looks like in current skb there is no service data, so simply initialize svc_meta_len to 0. htc_issue_send() does not initialize htc_frame_hdr::control array. Based on firmware code, it will initialize it by itself, so simply zero whole array to make KMSAN happy Fail logs: BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 4-7 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline] hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline] htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275 ... Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974 kmalloc_reserve net/core/skbuff.c:354 [inline] __alloc_skb+0x545/0xf90 net/core/skbuff.c:426 alloc_skb include/linux/skbuff.h:1126 [inline] htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258 ... Bytes 16-17 of 18 are uninitialized Memory access of size 18 starts at ffff888027377e00 | |||||
| CVE-2022-49862 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value. syzbot reported a call trace because of it: BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] | |||||
| CVE-2022-49845 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_send_one(): fix missing CAN header initialization The read access to struct canxl_frame::len inside of a j1939 created skbuff revealed a missing initialization of reserved and later filled elements in struct can_frame. This patch initializes the 8 byte CAN header with zero. | |||||
| CVE-2021-45688 | 1 Ash-rs | 1 Ash | 2025-09-30 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in the ash crate before 0.33.1 for Rust. util::read_spv may read from uninitialized memory locations. | |||||
| CVE-2024-36900 | 1 Linux | 1 Linux Kernel | 2025-09-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization. | |||||
| CVE-2024-36021 | 1 Linux | 1 Linux Kernel | 2025-09-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during pf initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by taking devl_lock during initialization. | |||||
| CVE-2022-34266 | 2 Amazon, Libtiff | 2 Amazon Linux, Libtiff | 2025-09-30 | N/A | 5.5 MEDIUM |
| The libtiff-4.0.3-35.amzn2.0.1 package for LibTIFF on Amazon Linux 2 allows attackers to cause a denial of service (application crash), a different vulnerability than CVE-2022-0562. When processing a malicious TIFF file, an invalid range may be passed as an argument to the memset() function within TIFFFetchStripThing() in tif_dirread.c. This will cause TIFFFetchStripThing() to segfault after use of an uninitialized resource. | |||||
| CVE-2024-42128 | 1 Linux | 1 Linux Kernel | 2025-09-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: leds: an30259a: Use devm_mutex_init() for mutex initialization In this driver LEDs are registered using devm_led_classdev_register() so they are automatically unregistered after module's remove() is done. led_classdev_unregister() calls module's led_set_brightness() to turn off the LEDs and that callback uses mutex which was destroyed already in module's remove() so use devm API instead. | |||||
| CVE-2024-56685 | 1 Linux | 1 Linux Kernel | 2025-09-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero length, and only gets populated with the dummy struct after the card is registered. Since the sound card driver's probe happens before the card registration, accessing any of the members of a dummy component during probe will result in undefined behavior. This can be observed in the mt8188 and mt8195 machine sound drivers. By omitting a dai link subnode in the sound card's node in the Devicetree, the default uninitialized dummy codec is used, and when its dai_name pointer gets passed to strcmp() it results in a null pointer dereference and a kernel panic. In addition to that, set_card_codec_info() in the generic helpers file, mtk-soundcard-driver.c, will populate a dai link with a dummy codec when a dai link node is present in DT but with no codec property. The result is that at probe time, a dummy codec can either be uninitialized with num_codecs = 0, or be an initialized dummy codec, with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to accommodate for both situations, check that num_codecs is not zero before accessing the codecs' fields but still check for the codec's dai name against "snd-soc-dummy-dai" as needed. While at it, also drop the check that dai_name is not null in the mt8192 driver, introduced in commit 4d4e1b6319e5 ("ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing"), as it is actually redundant given the preceding num_codecs != 0 check. | |||||
| CVE-2024-42113 | 1 Linux | 1 Linux Kernel | 2025-09-26 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors. | |||||
| CVE-2024-40998 | 1 Linux | 1 Linux Kernel | 2025-09-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super() In the following concurrency we will access the uninitialized rs->lock: ext4_fill_super ext4_register_sysfs // sysfs registered msg_ratelimit_interval_ms // Other processes modify rs->interval to // non-zero via msg_ratelimit_interval_ms ext4_orphan_cleanup ext4_msg(sb, KERN_INFO, "Errors on filesystem, " __ext4_msg ___ratelimit(&(EXT4_SB(sb)->s_msg_ratelimit_state) if (!rs->interval) // do nothing if interval is 0 return 1; raw_spin_trylock_irqsave(&rs->lock, flags) raw_spin_trylock(lock) _raw_spin_trylock __raw_spin_trylock spin_acquire(&lock->dep_map, 0, 1, _RET_IP_) lock_acquire __lock_acquire register_lock_class assign_lock_key dump_stack(); ratelimit_state_init(&sbi->s_msg_ratelimit_state, 5 * HZ, 10); raw_spin_lock_init(&rs->lock); // init rs->lock here and get the following dump_stack: ========================================================= INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 12 PID: 753 Comm: mount Tainted: G E 6.7.0-rc6-next-20231222 #504 [...] Call Trace: dump_stack_lvl+0xc5/0x170 dump_stack+0x18/0x30 register_lock_class+0x740/0x7c0 __lock_acquire+0x69/0x13a0 lock_acquire+0x120/0x450 _raw_spin_trylock+0x98/0xd0 ___ratelimit+0xf6/0x220 __ext4_msg+0x7f/0x160 [ext4] ext4_orphan_cleanup+0x665/0x740 [ext4] __ext4_fill_super+0x21ea/0x2b10 [ext4] ext4_fill_super+0x14d/0x360 [ext4] [...] ========================================================= Normally interval is 0 until s_msg_ratelimit_state is initialized, so ___ratelimit() does nothing. But registering sysfs precedes initializing rs->lock, so it is possible to change rs->interval to a non-zero value via the msg_ratelimit_interval_ms interface of sysfs while rs->lock is uninitialized, and then a call to ext4_msg triggers the problem by accessing an uninitialized rs->lock. Therefore register sysfs after all initializations are complete to avoid such problems. | |||||