Total
184 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-24903 | 4 Debian, Fedoraproject, Netapp and 1 more | 4 Debian Linux, Fedora, Active Iq Unified Manager and 1 more | 2024-11-21 | 6.8 MEDIUM | 8.1 HIGH |
| Rsyslog is a rocket-fast system for log processing. Modules for TCP syslog reception have a potential heap buffer overflow when octet-counted framing is used. This can result in a segfault or some other malfunction. As of our understanding, this vulnerability can not be used for remote code execution. But there may still be a slight chance for experts to do that. The bug occurs when the octet count is read. While there is a check for the maximum number of octets, digits are written to a heap buffer even when the octet count is over the maximum, This can be used to overrun the memory buffer. However, once the sequence of digits stop, no additional characters can be added to the buffer. In our opinion, this makes remote exploits impossible or at least highly complex. Octet-counted framing is one of two potential framing modes. It is relatively uncommon, but enabled by default on receivers. Modules `imtcp`, `imptcp`, `imgssapi`, and `imhttp` are used for regular syslog message reception. It is best practice not to directly expose them to the public. When this practice is followed, the risk is considerably lower. Module `imdiag` is a diagnostics module primarily intended for testbench runs. We do not expect it to be present on any production installation. Octet-counted framing is not very common. Usually, it needs to be specifically enabled at senders. If users do not need it, they can turn it off for the most important modules. This will mitigate the vulnerability. | |||||
| CVE-2022-24754 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2024-11-21 | 7.5 HIGH | 8.5 HIGH |
| PJSIP is a free and open source multimedia communication library written in C language. In versions prior to and including 2.12 PJSIP there is a stack-buffer overflow vulnerability which only impacts PJSIP users who accept hashed digest credentials (credentials with data_type `PJSIP_CRED_DATA_DIGEST`). This issue has been patched in the master branch of the PJSIP repository and will be included with the next release. Users unable to upgrade need to check that the hashed digest data length must be equal to `PJSIP_MD5STRLEN` before passing to PJSIP. | |||||
| CVE-2022-23635 | 1 Istio | 1 Istio | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| Istio is an open platform to connect, manage, and secure microservices. In affected versions the Istio control plane, `istiod`, is vulnerable to a request processing error, allowing a malicious attacker that sends a specially crafted message which results in the control plane crashing. This endpoint is served over TLS port 15012, but does not require any authentication from the attacker. For simple installations, Istiod is typically only reachable from within the cluster, limiting the blast radius. However, for some deployments, especially [multicluster](https://istio.io/latest/docs/setup/install/multicluster/primary-remote/) topologies, this port is exposed over the public internet. There are no effective workarounds, beyond upgrading. Limiting network access to Istiod to the minimal set of clients can help lessen the scope of the vulnerability to some extent. | |||||
| CVE-2022-23580 | 1 Google | 1 Tensorflow | 2024-11-21 | 5.0 MEDIUM | 6.5 MEDIUM |
| Tensorflow is an Open Source Machine Learning Framework. During shape inference, TensorFlow can allocate a large vector based on a value from a tensor controlled by the user. The fix will be included in TensorFlow 2.8.0. We will also cherrypick this commit on TensorFlow 2.7.1, TensorFlow 2.6.3, and TensorFlow 2.5.3, as these are also affected and still in supported range. | |||||
| CVE-2022-23319 | 1 Pcf2bdf Project | 1 Pcf2bdf | 2024-11-21 | 4.3 MEDIUM | 5.5 MEDIUM |
| A segmentation fault during PCF file parsing in pcf2bdf versions >=1.05 allows an attacker to trigger a program crash via a specially crafted PCF font file. This crash affects the availability of the software and dependent downstream components. | |||||
| CVE-2022-22166 | 1 Juniper | 1 Junos | 2024-11-21 | 3.3 LOW | 6.5 MEDIUM |
| An Improper Validation of Specified Quantity in Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause an rdp crash and thereby a Denial of Service (DoS). If a BGP update message is received over an established BGP session where a BGP SR-TE policy tunnel attribute is malformed and BGP update tracing flag is enabled, the rpd will core. This issue can happen with any BGP session as long as the previous conditions are met. This issue can not propagate as the crash occurs as soon as the malformed update is received. This issue affects Juniper Networks Junos OS: 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S2, 21.1R3. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1. | |||||
| CVE-2022-22072 | 1 Qualcomm | 116 Apq8009, Apq8009 Firmware, Apq8017 and 113 more | 2024-11-21 | 7.2 HIGH | 7.8 HIGH |
| Buffer overflow can occur due to improper validation of NDP application information length in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music | |||||
| CVE-2022-21668 | 2 Fedoraproject, Pypa | 2 Fedora, Pipenv | 2024-11-21 | 9.3 HIGH | 8.0 HIGH |
| pipenv is a Python development workflow tool. Starting with version 2018.10.9 and prior to version 2022.1.8, a flaw in pipenv's parsing of requirements files allows an attacker to insert a specially crafted string inside a comment anywhere within a requirements.txt file, which will cause victims who use pipenv to install the requirements file to download dependencies from a package index server controlled by the attacker. By embedding malicious code in packages served from their malicious index server, the attacker can trigger arbitrary remote code execution (RCE) on the victims' systems. If an attacker is able to hide a malicious `--index-url` option in a requirements file that a victim installs with pipenv, the attacker can embed arbitrary malicious code in packages served from their malicious index server that will be executed on the victim's host during installation (remote code execution/RCE). When pip installs from a source distribution, any code in the setup.py is executed by the install process. This issue is patched in version 2022.1.8. The GitHub Security Advisory contains more information about this vulnerability. | |||||
| CVE-2022-21208 | 1 Node-opcua Project | 1 Node-opcua | 2024-11-21 | N/A | 7.5 HIGH |
| The package node-opcua before 2.74.0 are vulnerable to Denial of Service (DoS) due to a missing limitation on the number of received chunks - per single session or in total for all concurrent sessions. An attacker can exploit this vulnerability by sending an unlimited number of huge chunks (e.g. 2GB each) without sending the Final closing chunk. | |||||
| CVE-2022-20691 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Adaptive Telephone Adapter firmware could allow an unauthenticated, adjacent attacker to cause a DoS condition of an affected device. This vulnerability is due to missing length validation of certain Cisco Discovery Protocol packet header fields. An attacker could exploit this vulnerability by sending crafted Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust available memory and cause the service to restart. Cisco has released firmware updates that address this vulnerability. | |||||
| CVE-2022-20690 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| Multiple vulnerabilities in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, adjacent attacker to cause Cisco Discovery Protocol memory corruption on an affected device. These vulnerabilities are due to missing length validation checks when processing Cisco Discovery Protocol messages. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause an out-of-bounds read of the valid Cisco Discovery Protocol packet data, which could allow the attacker to cause corruption in the internal Cisco Discovery Protocol database of the affected device. | |||||
| CVE-2022-20689 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| Multiple vulnerabilities in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, adjacent attacker to cause Cisco Discovery Protocol memory corruption on an affected device. These vulnerabilities are due to missing length validation checks when processing Cisco Discovery Protocol messages. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause an out-of-bounds read of the valid Cisco Discovery Protocol packet data, which could allow the attacker to cause corruption in the internal Cisco Discovery Protocol database of the affected device. | |||||
| CVE-2022-20688 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device and cause Cisco Discovery Protocol service to restart. This vulnerability is due to missing length validation of certain Cisco Discovery Protocol packet header fields. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute code on the affected device and cause Cisco Discovery Protocol to restart unexpectedly, resulting in a DoS condition. | |||||
| CVE-2022-20687 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device and cause the LLDP service to restart. These vulnerabilities are due to missing length validation of certain LLDP packet header fields. An attacker could exploit these vulnerabilities by sending a malicious LLDP packet to an affected device. A successful exploit could allow the attacker to execute code on the affected device and cause LLDP to restart unexpectedly, resulting in a denial of service (DoS) condition. | |||||
| CVE-2022-20686 | 1 Cisco | 6 Ata 190, Ata 190 Firmware, Ata 191 and 3 more | 2024-11-21 | N/A | 5.3 MEDIUM |
| Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) functionality of Cisco ATA 190 Series Analog Telephone Adapter firmware could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device and cause the LLDP service to restart. These vulnerabilities are due to missing length validation of certain LLDP packet header fields. An attacker could exploit these vulnerabilities by sending a malicious LLDP packet to an affected device. A successful exploit could allow the attacker to execute code on the affected device and cause LLDP to restart unexpectedly, resulting in a denial of service (DoS) condition. | |||||
| CVE-2022-20445 | 1 Google | 1 Android | 2024-11-21 | N/A | 7.5 HIGH |
| In process_service_search_rsp of sdp_discovery.cc, there is a possible out of bounds read due to improper input validation. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10 Android-11 Android-12 Android-12L Android-13Android ID: A-225876506 | |||||
| CVE-2022-20385 | 1 Google | 1 Android | 2024-11-21 | N/A | 9.8 CRITICAL |
| a function called 'nla_parse', do not check the len of para, it will check nla_type (which can be controlled by userspace) with 'maxtype' (in this case, it is GSCAN_MAX), then it access polciy array 'policy[type]', which OOB access happens.Product: AndroidVersions: Android SoCAndroid ID: A-238379819 | |||||
| CVE-2022-1174 | 1 Gitlab | 1 Gitlab | 2024-11-21 | 5.0 MEDIUM | 4.3 MEDIUM |
| A potential DoS vulnerability was discovered in Gitlab CE/EE versions 13.7 before 14.7.7, all versions starting from 14.8 before 14.8.5, all versions starting from 14.9 before 14.9.2 allowed an attacker to trigger high CPU usage via a special crafted input added in Issues, Merge requests, Milestones, Snippets, Wiki pages, etc. | |||||
| CVE-2022-0596 | 1 Microweber | 1 Microweber | 2024-11-21 | 4.0 MEDIUM | 4.3 MEDIUM |
| Improper Validation of Specified Quantity in Input in Packagist microweber/microweber prior to 1.2.11. | |||||
| CVE-2022-0414 | 1 Dolibarr | 1 Dolibarr Erp\/crm | 2024-11-21 | 4.0 MEDIUM | 4.3 MEDIUM |
| Improper Validation of Specified Quantity in Input in Packagist dolibarr/dolibarr prior to 16.0. | |||||