Total
7759 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-49796 | 2025-11-03 | N/A | 9.1 CRITICAL | ||
| A vulnerability was found in libxml2. Processing certain sch:name elements from the input XML file can trigger a memory corruption issue. This flaw allows an attacker to craft a malicious XML input file that can lead libxml to crash, resulting in a denial of service or other possible undefined behavior due to sensitive data being corrupted in memory. | |||||
| CVE-2025-49175 | 2025-11-03 | N/A | 6.1 MEDIUM | ||
| A flaw was found in the X Rendering extension's handling of animated cursors. If a client provides no cursors, the server assumes at least one is present, leading to an out-of-bounds read and potential crash. | |||||
| CVE-2025-49133 | 1 Libtpms Project | 1 Libtpms | 2025-11-03 | N/A | 5.9 MEDIUM |
| Libtpms is a library that targets the integration of TPM functionality into hypervisors, primarily into Qemu. Libtpms, which is derived from the TPM 2.0 reference implementation code published by the Trusted Computing Group, is prone to a potential out of bounds (OOB) read vulnerability. The vulnerability occurs in the ‘CryptHmacSign’ function with an inconsistent pairing of the signKey and signScheme parameters, where the signKey is ALG_KEYEDHASH key and inScheme is an ECC or RSA scheme. The reported vulnerability is in the ‘CryptHmacSign’ function, which is defined in the "Part 4: Supporting Routines – Code" document, section "7.151 - /tpm/src/crypt/CryptUtil.c ". This vulnerability can be triggered from user-mode applications by sending malicious commands to a TPM 2.0/vTPM (swtpm) whose firmware is based on an affected TCG reference implementation. The effect on libtpms is that it will cause an abort due to the detection of the out-of-bounds access, thus for example making a vTPM (swtpm) unavailable to a VM. This vulnerability is fixed in 0.7.12, 0.8.10, 0.9.7, and 0.10.1. | |||||
| CVE-2025-47152 | 1 Pdf-xchange | 1 Pdf-xchange Editor | 2025-11-03 | N/A | 6.5 MEDIUM |
| An out-of-bounds read vulnerability exists in the EMF functionality of PDF-XChange Co. Ltd PDF-XChange Editor 10.6.0.396. By using a specially crafted EMF file, an attacker could exploit this vulnerability to perform an out-of-bounds read, potentially leading to the disclosure of sensitive information. | |||||
| CVE-2025-43963 | 1 Libraw | 1 Libraw | 2025-11-03 | N/A | 2.9 LOW |
| In LibRaw before 0.21.4, phase_one_correct in decoders/load_mfbacks.cpp allows out-of-buffer access because split_col and split_row values are not checked in 0x041f tag processing. | |||||
| CVE-2025-43962 | 1 Libraw | 1 Libraw | 2025-11-03 | N/A | 2.9 LOW |
| In LibRaw before 0.21.4, phase_one_correct in decoders/load_mfbacks.cpp has out-of-bounds reads for tag 0x412 processing, related to large w0 or w1 values or the frac and mult calculations. | |||||
| CVE-2025-43961 | 1 Libraw | 1 Libraw | 2025-11-03 | N/A | 2.9 LOW |
| In LibRaw before 0.21.4, metadata/tiff.cpp has an out-of-bounds read in the Fujifilm 0xf00c tag parser. | |||||
| CVE-2025-43255 | 1 Apple | 1 Macos | 2025-11-03 | N/A | 3.3 LOW |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sonoma 14.7.7, macOS Sequoia 15.6, macOS Ventura 13.7.7. An app may be able to cause unexpected system termination. | |||||
| CVE-2025-43254 | 1 Apple | 1 Macos | 2025-11-03 | N/A | 7.1 HIGH |
| An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Sequoia 15.6, macOS Ventura 13.7.7, macOS Sonoma 14.7.7. Processing a maliciously crafted file may lead to unexpected app termination. | |||||
| CVE-2025-43239 | 1 Apple | 1 Macos | 2025-11-03 | N/A | 7.1 HIGH |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.6, macOS Sonoma 14.7.7, macOS Ventura 13.7.7. Processing a maliciously crafted file may lead to unexpected app termination. | |||||
| CVE-2025-43226 | 1 Apple | 6 Ipados, Iphone Os, Macos and 3 more | 2025-11-03 | N/A | 4.0 MEDIUM |
| An out-of-bounds read was addressed with improved input validation. This issue is fixed in watchOS 11.6, iOS 18.6 and iPadOS 18.6, iPadOS 17.7.9, tvOS 18.6, macOS Sequoia 15.6, macOS Sonoma 14.7.7, visionOS 2.6. Processing a maliciously crafted image may result in disclosure of process memory. | |||||
| CVE-2025-43221 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2025-11-03 | N/A | 7.1 HIGH |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.6, iOS 18.6 and iPadOS 18.6, visionOS 2.6, tvOS 18.6. Processing a maliciously crafted media file may lead to unexpected app termination or corrupt process memory. | |||||
| CVE-2025-43218 | 1 Apple | 1 Macos | 2025-11-03 | N/A | 5.5 MEDIUM |
| An out-of-bounds read was addressed with improved input validation. This issue is fixed in macOS Sequoia 15.6. Processing a maliciously crafted USD file may disclose memory contents. | |||||
| CVE-2025-39735 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised. | |||||
| CVE-2025-37785 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-32914 | 2025-11-03 | N/A | 7.4 HIGH | ||
| A flaw was found in libsoup, where the soup_multipart_new_from_message() function is vulnerable to an out-of-bounds read. This flaw allows a malicious HTTP client to induce the libsoup server to read out of bounds. | |||||
| CVE-2025-32906 | 2025-11-03 | N/A | 7.5 HIGH | ||
| A flaw was found in libsoup, where the soup_headers_parse_request() function may be vulnerable to an out-of-bound read. This flaw allows a malicious user to use a specially crafted HTTP request to crash the HTTP server. | |||||
| CVE-2025-32776 | 2025-11-03 | N/A | 5.5 MEDIUM | ||
| OpenRazer is an open source driver and user-space daemon to control Razer device lighting and other features on GNU/Linux. By writing specially crafted data to the `matrix_custom_frame` file, an attacker can cause the custom kernel driver to read more bytes than provided by user space. This data will be written into the RGB arguments which will be sent to the USB device. This issue has been patched in v3.10.2. | |||||
| CVE-2025-32415 | 1 Xmlsoft | 1 Libxml2 | 2025-11-03 | N/A | 2.9 LOW |
| In libxml2 before 2.13.8 and 2.14.x before 2.14.2, xmlSchemaIDCFillNodeTables in xmlschemas.c has a heap-based buffer under-read. To exploit this, a crafted XML document must be validated against an XML schema with certain identity constraints, or a crafted XML schema must be used. | |||||
| CVE-2025-32365 | 1 Freedesktop | 1 Poppler | 2025-11-03 | N/A | 4.0 MEDIUM |
| Poppler before 25.04.0 allows crafted input files to trigger out-of-bounds reads in the JBIG2Bitmap::combine function in JBIG2Stream.cc because of a misplaced isOk check. | |||||