Total
12147 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-43498 | 3 Apple, Linux, Microsoft | 5 Macos, Linux Kernel, .net and 2 more | 2024-11-19 | N/A | 9.8 CRITICAL |
| .NET and Visual Studio Remote Code Execution Vulnerability | |||||
| CVE-2024-43499 | 3 Apple, Linux, Microsoft | 5 Macos, Linux Kernel, .net and 2 more | 2024-11-19 | N/A | 7.5 HIGH |
| .NET and Visual Studio Denial of Service Vulnerability | |||||
| CVE-2024-50159 | 1 Linux | 1 Linux Kernel | 2024-11-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup() Clang static checker(scan-build) throws below warning： | drivers/firmware/arm_scmi/driver.c:line 2915, column 2 | Attempt to free released memory. When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup() will run twice which causes double free of 'dbg->name'. Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. | |||||
| CVE-2024-50152 | 1 Linux | 1 Linux Kernel | 2024-11-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix possible double free in smb2_set_ea() Clang static checker(scan-build) warning： fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory. 1304 | kfree(ea); | ^~~~~~~~~ There is a double free in such case: 'ea is initialized to NULL' -> 'first successful memory allocation for ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea' -> 'goto replay_again' -> 'second goto sea_exit before allocate memory for ea' -> 'second memory release for ea resulted in double free'. Re-initialie 'ea' to NULL near to the replay_again label, it can fix this double free problem. | |||||
| CVE-2023-4134 | 2 Fedoraproject, Linux | 2 Fedora, Linux Kernel | 2024-11-18 | N/A | 5.5 MEDIUM |
| A use-after-free vulnerability was found in the cyttsp4_core driver in the Linux kernel. This issue occurs in the device cleanup routine due to a possible rearming of the watchdog_timer from the workqueue. This could allow a local user to crash the system, causing a denial of service. | |||||
| CVE-2024-50243 | 1 Linux | 1 Linux Kernel | 2024-11-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix general protection fault in run_is_mapped_full Fixed deleating of a non-resident attribute in ntfs_create_inode() rollback. | |||||
| CVE-2024-50036 | 1 Linux | 1 Linux Kernel | 2024-11-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: do not delay dst_entries_add() in dst_release() dst_entries_add() uses per-cpu data that might be freed at netns dismantle from ip6_route_net_exit() calling dst_entries_destroy() Before ip6_route_net_exit() can be called, we release all the dsts associated with this netns, via calls to dst_release(), which waits an rcu grace period before calling dst_destroy() dst_entries_add() use in dst_destroy() is racy, because dst_entries_destroy() could have been called already. Decrementing the number of dsts must happen sooner. Notes: 1) in CONFIG_XFRM case, dst_destroy() can call dst_release_immediate(child), this might also cause UAF if the child does not have DST_NOCOUNT set. IPSEC maintainers might take a look and see how to address this. 2) There is also discussion about removing this count of dst, which might happen in future kernels. | |||||
| CVE-2024-49991 | 1 Linux | 1 Linux Kernel | 2024-11-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer Pass pointer reference to amdgpu_bo_unref to clear the correct pointer, otherwise amdgpu_bo_unref clear the local variable, the original pointer not set to NULL, this could cause use-after-free bug. | |||||
| CVE-2024-49986 | 1 Linux | 1 Linux Kernel | 2024-11-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors x86_android_tablet_remove() frees the pdevs[] array, so it should not be used after calling x86_android_tablet_remove(). When platform_device_register() fails, store the pdevs[x] PTR_ERR() value into the local ret variable before calling x86_android_tablet_remove() to avoid using pdevs[] after it has been freed. | |||||
| CVE-2024-47674 | 1 Linux | 1 Linux Kernel | 2024-11-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: avoid leaving partial pfn mappings around in error case As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. | |||||
| CVE-2024-45642 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2024-11-16 | N/A | 5.3 MEDIUM |
| IBM Security ReaQta 3.12 is vulnerable to cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | |||||
| CVE-2024-45099 | 2 Ibm, Linux | 2 Security Qradar Edr, Linux Kernel | 2024-11-16 | N/A | 3.1 LOW |
| IBM Security ReaQta 3.12 is vulnerable to cross-site scripting. This vulnerability allows a privileged user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. | |||||
| CVE-2024-49937 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Set correct chandef when starting CAC When starting CAC in a mode other than AP mode, it return a "WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]" caused by the chandef.chan being null at the end of CAC. Solution: Ensure the channel definition is set for the different modes when starting CAC to avoid getting a NULL 'chan' at the end of CAC. Call Trace: ? show_regs.part.0+0x14/0x16 ? __warn+0x67/0xc0 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? report_bug+0xa7/0x130 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x50 ? exc_invalid_op+0x18/0x60 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? exc_overflow+0x30/0x30 ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211] ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211] ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211] ? process_one_work+0x165/0x280 ? worker_thread+0x120/0x3f0 ? kthread+0xc2/0xf0 ? process_one_work+0x280/0x280 ? kthread_complete_and_exit+0x20/0x20 ? ret_from_fork+0x19/0x24 [shorten subject, remove OCB, reorder cases to match previous list] | |||||
| CVE-2024-49938 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. | |||||
| CVE-2024-49933 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. | |||||
| CVE-2024-49932 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't readahead the relocation inode on RST On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel p ---truncated--- | |||||
| CVE-2024-49927 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/ioapic: Handle allocation failures gracefully Breno observed panics when using failslab under certain conditions during runtime: can not alloc irq_pin_list (-1,0,20) Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed panic+0x4e9/0x590 mp_irqdomain_alloc+0x9ab/0xa80 irq_domain_alloc_irqs_locked+0x25d/0x8d0 __irq_domain_alloc_irqs+0x80/0x110 mp_map_pin_to_irq+0x645/0x890 acpi_register_gsi_ioapic+0xe6/0x150 hpet_open+0x313/0x480 That's a pointless panic which is a leftover of the historic IO/APIC code which panic'ed during early boot when the interrupt allocation failed. The only place which might justify panic is the PIT/HPET timer_check() code which tries to figure out whether the timer interrupt is delivered through the IO/APIC. But that code does not require to handle interrupt allocation failures. If the interrupt cannot be allocated then timer delivery fails and it either panics due to that or falls back to legacy mode. Cure this by removing the panic wrapper around __add_pin_to_irq_node() and making mp_irqdomain_alloc() aware of the failure condition and handle it as any other failure in this function gracefully. | |||||
| CVE-2024-49888 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a sdiv overflow issue Zac Ecob reported a problem where a bpf program may cause kernel crash due to the following error: Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI The failure is due to the below signed divide: LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808. LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808, but it is impossible since for 64-bit system, the maximum positive number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is LLONG_MIN. Further investigation found all the following sdiv/smod cases may trigger an exception when bpf program is running on x86_64 platform: - LLONG_MIN/-1 for 64bit operation - INT_MIN/-1 for 32bit operation - LLONG_MIN%-1 for 64bit operation - INT_MIN%-1 for 32bit operation where -1 can be an immediate or in a register. On arm64, there are no exceptions: - LLONG_MIN/-1 = LLONG_MIN - INT_MIN/-1 = INT_MIN - LLONG_MIN%-1 = 0 - INT_MIN%-1 = 0 where -1 can be an immediate or in a register. Insn patching is needed to handle the above cases and the patched codes produced results aligned with above arm64 result. The below are pseudo codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0 and the divisor is stored in a register. sdiv: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L2 if tmp == 0 goto L1 rY = 0 L1: rY = -rY; goto L3 L2: rY /= rX L3: smod: tmp = rX tmp += 1 /* [-1, 0] -> [0, 1] if tmp >(unsigned) 1 goto L1 if tmp == 1 (is64 ? goto L2 : goto L3) rY = 0; goto L2 L1: rY %= rX L2: goto L4 // only when !is64 L3: wY = wY // only when !is64 L4: [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/ | |||||
| CVE-2024-49887 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to don't panic system for no free segment fault injection f2fs: fix to don't panic system for no free segment fault injection syzbot reports a f2fs bug as below: F2FS-fs (loop0): inject no free segment in get_new_segment of __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 F2FS-fs (loop0): Stopped filesystem due to reason: 7 ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2748! CPU: 0 UID: 0 PID: 5109 Comm: syz-executor304 Not tainted 6.11.0-rc6-syzkaller-00363-g89f5e14d05b4 #0 RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 Call Trace: __allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3167 f2fs_allocate_new_section fs/f2fs/segment.c:3181 [inline] f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3195 f2fs_expand_inode_data+0x5d6/0xbb0 fs/f2fs/file.c:1799 f2fs_fallocate+0x448/0x960 fs/f2fs/file.c:1903 vfs_fallocate+0x553/0x6c0 fs/open.c:334 do_vfs_ioctl+0x2592/0x2e50 fs/ioctl.c:886 __do_sys_ioctl fs/ioctl.c:905 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:get_new_segment fs/f2fs/segment.c:2748 [inline] RIP: 0010:new_curseg+0x1f61/0x1f70 fs/f2fs/segment.c:2836 The root cause is when we inject no free segment fault into f2fs, we should not panic system, fix it. | |||||
| CVE-2024-49886 | 1 Linux | 1 Linux Kernel | 2024-11-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug Attaching SST PCI device to VM causes "BUG: KASAN: slab-out-of-bounds". kasan report: [ 19.411889] ================================================================== [ 19.413702] BUG: KASAN: slab-out-of-bounds in _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.415634] Read of size 8 at addr ffff888829e65200 by task cpuhp/16/113 [ 19.417368] [ 19.418627] CPU: 16 PID: 113 Comm: cpuhp/16 Tainted: G E 6.9.0 #10 [ 19.420435] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 19.422687] Call Trace: [ 19.424091] <TASK> [ 19.425448] dump_stack_lvl+0x5d/0x80 [ 19.426963] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.428694] print_report+0x19d/0x52e [ 19.430206] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 19.431837] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.433539] kasan_report+0xf0/0x170 [ 19.435019] ? _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.436709] _isst_if_get_pci_dev+0x3d5/0x400 [isst_if_common] [ 19.438379] ? __pfx_sched_clock_cpu+0x10/0x10 [ 19.439910] isst_if_cpu_online+0x406/0x58f [isst_if_common] [ 19.441573] ? __pfx_isst_if_cpu_online+0x10/0x10 [isst_if_common] [ 19.443263] ? ttwu_queue_wakelist+0x2c1/0x360 [ 19.444797] cpuhp_invoke_callback+0x221/0xec0 [ 19.446337] cpuhp_thread_fun+0x21b/0x610 [ 19.447814] ? __pfx_cpuhp_thread_fun+0x10/0x10 [ 19.449354] smpboot_thread_fn+0x2e7/0x6e0 [ 19.450859] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 19.452405] kthread+0x29c/0x350 [ 19.453817] ? __pfx_kthread+0x10/0x10 [ 19.455253] ret_from_fork+0x31/0x70 [ 19.456685] ? __pfx_kthread+0x10/0x10 [ 19.458114] ret_from_fork_asm+0x1a/0x30 [ 19.459573] </TASK> [ 19.460853] [ 19.462055] Allocated by task 1198: [ 19.463410] kasan_save_stack+0x30/0x50 [ 19.464788] kasan_save_track+0x14/0x30 [ 19.466139] __kasan_kmalloc+0xaa/0xb0 [ 19.467465] __kmalloc+0x1cd/0x470 [ 19.468748] isst_if_cdev_register+0x1da/0x350 [isst_if_common] [ 19.470233] isst_if_mbox_init+0x108/0xff0 [isst_if_mbox_msr] [ 19.471670] do_one_initcall+0xa4/0x380 [ 19.472903] do_init_module+0x238/0x760 [ 19.474105] load_module+0x5239/0x6f00 [ 19.475285] init_module_from_file+0xd1/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.476506] idempotent_init_module+0x23b/0x650 [ 19.477725] __x64_sys_finit_module+0xbe/0x130 [ 19.478920] do_syscall_64+0x82/0x160 [ 19.480036] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 19.481292] [ 19.482205] The buggy address belongs to the object at ffff888829e65000 which belongs to the cache kmalloc-512 of size 512 [ 19.484818] The buggy address is located 0 bytes to the right of allocated 512-byte region [ffff888829e65000, ffff888829e65200) [ 19.487447] [ 19.488328] The buggy address belongs to the physical page: [ 19.489569] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888829e60c00 pfn:0x829e60 [ 19.491140] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 19.492466] anon flags: 0x57ffffc0000840(slab|head|node=1|zone=2|lastcpupid=0x1fffff) [ 19.493914] page_type: 0xffffffff() [ 19.494988] raw: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.496451] raw: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.497906] head: 0057ffffc0000840 ffff88810004cc80 0000000000000000 0000000000000001 [ 19.499379] head: ffff888829e60c00 0000000080200018 00000001ffffffff 0000000000000000 [ 19.500844] head: 0057ffffc0000003 ffffea0020a79801 ffffea0020a79848 00000000ffffffff [ 19.502316] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000 [ 19.503784] page dumped because: k ---truncated--- | |||||