Filtered by vendor Dlink
Subscribe
Total
1064 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8410 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device. | |||||
| CVE-2017-8409 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DCS-1130 devices. The device requires that a user logging to the device to provide a username and password. However, the device does not enforce the same restriction on a specific URL thereby allowing any attacker in possession of that to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there. | |||||
| CVE-2017-8408 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the GET parameters passed in this request (to test if SMB credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "cgibox" is the one that has the vulnerable function "sub_7EAFC" that receives the values sent by the GET request. If we open this binary in IDA-pro we will notice that this follows a ARM little endian format. The function sub_7EAFC in IDA pro is identified to be receiving the values sent in the GET request and the value set in GET parameter "user" is extracted in function sub_7E49C which is then passed to the vulnerable system API call. | |||||
| CVE-2017-8407 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password. | |||||
| CVE-2017-8406 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield. | |||||
| CVE-2017-8405 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there. | |||||
| CVE-2017-8404 | 1 Dlink | 2 Dcs-1130, Dcs-1130 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue. | |||||
| CVE-2017-17020 | 1 Dlink | 6 Dcs-5009, Dcs-5009 Firmware, Dcs-5010 and 3 more | 2024-11-21 | 6.5 MEDIUM | 8.8 HIGH |
| On D-Link DCS-5009 devices with firmware 1.08.11 and earlier, DCS-5010 devices with firmware 1.14.09 and earlier, and DCS-5020L devices with firmware before 1.15.01, command injection in alphapd (binary responsible for running the camera's web server) allows remote authenticated attackers to execute code through sanitized /setSystemAdmin user input in the AdminID field being passed directly to a call to system. | |||||
| CVE-2017-14948 | 1 Dlink | 12 Dir-868l, Dir-868l Firmware, Dir-880l and 9 more | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution. | |||||
| CVE-2017-11564 | 1 Dlink | 2 Eyeon Baby Monitor, Eyeon Baby Monitor Firmware | 2024-11-21 | 9.0 HIGH | 8.8 HIGH |
| The D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has multiple command injection vulnerabilities in the web service framework. An attacker can forge malicious HTTP requests to execute commands; authentication is required before executing the attack. | |||||
| CVE-2017-11563 | 1 Dlink | 2 Eyeon Baby Monitor, Eyeon Baby Monitor Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link EyeOn Baby Monitor (DCS-825L) 1.08.1 has a remote code execution vulnerability. A UDP "Discover" service, which provides multiple functions such as changing the passwords and getting basic information, was installed on the device. A remote attacker can send a crafted UDP request to finderd to perform stack overflow and execute arbitrary code with root privilege on the device. | |||||
| CVE-2016-6563 | 1 Dlink | 18 Dir-818l\(w\), Dir-818l\(w\) Firmware, Dir-822 and 15 more | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| Processing malformed SOAP messages when performing the HNAP Login action causes a buffer overflow in the stack in some D-Link DIR routers. The vulnerable XML fields within the SOAP body are: Action, Username, LoginPassword, and Captcha. The following products are affected: DIR-823, DIR-822, DIR-818L(W), DIR-895L, DIR-890L, DIR-885L, DIR-880L, DIR-868L, and DIR-850L. | |||||
| CVE-2015-0153 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| D-Link DIR-815 devices with firmware before 2.07.B01 allow remote attackers to obtain sensitive information by leveraging cleartext storage of the wireless key. | |||||
| CVE-2015-0152 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-815 devices with firmware before 2.07.B01 allow remote attackers to obtain sensitive information by leveraging cleartext storage of the administrative password. | |||||
| CVE-2015-0151 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences. | |||||
| CVE-2015-0150 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| The remote administration UI in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to bypass intended access restrictions via unspecified vectors. | |||||
| CVE-2014-8888 | 1 Dlink | 2 Dir-815, Dir-815 Firmware | 2024-11-21 | 10.0 HIGH | 9.8 CRITICAL |
| The remote administration interface in D-Link DIR-815 devices with firmware before 2.03.B02 allows remote attackers to execute arbitrary commands via vectors related to an "HTTP command injection issue." | |||||
| CVE-2014-3136 | 1 Dlink | 2 Dwr-113, Dwr-113 Firmware | 2024-11-21 | 6.8 MEDIUM | 8.8 HIGH |
| Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors. | |||||
| CVE-2013-7471 | 1 Dlink | 10 Dir-300, Dir-300 Firmware, Dir-600 and 7 more | 2024-11-21 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in soap.cgi?service=WANIPConn1 on D-Link DIR-845 before v1.02b03, DIR-600 before v2.17b01, DIR-645 before v1.04b11, DIR-300 rev. B, and DIR-865 devices. There is Command Injection via shell metacharacters in the NewInternalClient, NewExternalPort, or NewInternalPort element of a SOAP POST request. | |||||
| CVE-2013-7055 | 1 Dlink | 2 Dir-100, Dir-100 Firmware | 2024-11-21 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-100 4.03B07 has PPTP and poe information disclosure | |||||