Total
10465 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-53074 | 1 Linux | 1 Linux Kernel | 2024-11-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't leak a link on AP removal Release the link mapping resource in AP removal. This impacted devices that do not support the MLD API (9260 and down). On those devices, we couldn't start the AP again after the AP has been already started and stopped. | |||||
| CVE-2024-53088 | 1 Linux | 1 Linux Kernel | 2024-11-25 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i40e: fix race condition by adding filter's intermediate sync state Fix a race condition in the i40e driver that leads to MAC/VLAN filters becoming corrupted and leaking. Address the issue that occurs under heavy load when multiple threads are concurrently modifying MAC/VLAN filters by setting mac and port VLAN. 1. Thread T0 allocates a filter in i40e_add_filter() within i40e_ndo_set_vf_port_vlan(). 2. Thread T1 concurrently frees the filter in __i40e_del_filter() within i40e_ndo_set_vf_mac(). 3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which refers to the already freed filter memory, causing corruption. Reproduction steps: 1. Spawn multiple VFs. 2. Apply a concurrent heavy load by running parallel operations to change MAC addresses on the VFs and change port VLANs on the host. 3. Observe errors in dmesg: "Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX, please set promiscuous on manually for VF XX". Exact code for stable reproduction Intel can't open-source now. The fix involves implementing a new intermediate filter state, I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list. These filters cannot be deleted from the hash list directly but must be removed using the full process. | |||||
| CVE-2024-53082 | 1 Linux | 1 Linux Kernel | 2024-11-25 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: Add hash_key_length check Add hash_key_length check in virtnet_probe() to avoid possible out of bound errors when setting/reading the hash key. | |||||
| CVE-2024-53078 | 1 Linux | 1 Linux Kernel | 2024-11-25 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix NULL vs IS_ERR() check in probe() The iommu_paging_domain_alloc() function doesn't return NULL pointers, it returns error pointers. Update the check to match. | |||||
| CVE-2024-0646 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-25 | N/A | 7.0 HIGH |
| An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system. | |||||
| CVE-2024-0564 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2024-11-25 | N/A | 5.3 MEDIUM |
| A flaw was found in the Linux kernel's memory deduplication mechanism. The max page sharing of Kernel Samepage Merging (KSM), added in Linux kernel version 4.4.0-96.119, can create a side channel. When the attacker and the victim share the same host and the default setting of KSM is "max page sharing=256", it is possible for the attacker to time the unmap to merge with the victim's page. The unmapping time depends on whether it merges with the victim's page and additional physical pages are created beyond the KSM's "max page share". Through these operations, the attacker can leak the victim's page. | |||||
| CVE-2024-44947 | 1 Linux | 1 Linux Kernel | 2024-11-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter). | |||||
| CVE-2024-53069 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: fix a NULL-pointer dereference Some SCM calls can be invoked with __scm being NULL (the driver may not have been and will not be probed as there's no SCM entry in device-tree). Make sure we don't dereference a NULL pointer. | |||||
| CVE-2024-53076 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table() If per_time_scales[i] or per_time_gains[i] kcalloc fails in the for loop of iio_gts_build_avail_scale_table(), the err_free_out will fail to call kfree() each time when i is reduced to 0, so all the per_time_scales[0] and per_time_gains[0] will not be freed, which will cause memory leaks. Fix it by checking if i >= 0. | |||||
| CVE-2024-53043 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mctp i2c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol. | |||||
| CVE-2024-50268 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: fix potential out of bounds in ucsi_ccg_update_set_new_cam_cmd() The "*cmd" variable can be controlled by the user via debugfs. That means "new_cam" can be as high as 255 while the size of the uc->updated[] array is UCSI_MAX_ALTMODES (30). The call tree is: ucsi_cmd() // val comes from simple_attr_write_xsigned() -> ucsi_send_command() -> ucsi_send_command_common() -> ucsi_run_command() // calls ucsi->ops->sync_control() -> ucsi_ccg_sync_control() | |||||
| CVE-2024-50158 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix out of bound check Driver exports pacing stats only on GenP5 and P7 adapters. But while parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This caused a trace when KASAN is enabled. BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re] Write of size 8 at addr ffff8885942a6340 by task modprobe/4809 | |||||
| CVE-2024-50162 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: devmap: provide rxq after redirect rxq contains a pointer to the device from where the redirect happened. Currently, the BPF program that was executed after a redirect via BPF_MAP_TYPE_DEVMAP* does not have it set. This is particularly bad since accessing ingress_ifindex, e.g. SEC("xdp") int prog(struct xdp_md *pkt) { return bpf_redirect_map(&dev_redirect_map, 0, 0); } SEC("xdp/devmap") int prog_after_redirect(struct xdp_md *pkt) { bpf_printk("ifindex %i", pkt->ingress_ifindex); return XDP_PASS; } depends on access to rxq, so a NULL pointer gets dereferenced: <1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000 <1>[ 574.475188] #PF: supervisor read access in kernel mode <1>[ 574.475194] #PF: error_code(0x0000) - not-present page <6>[ 574.475199] PGD 0 P4D 0 <4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI <4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23 <4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023 <4>[ 574.475231] Workqueue: mld mld_ifc_work <4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b <4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206 <4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000 <4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0 <4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001 <4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000 <4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000 <4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000 <4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0 <4>[ 574.475303] PKRU: 55555554 <4>[ 574.475306] Call Trace: <4>[ 574.475313] <IRQ> <4>[ 574.475318] ? __die+0x23/0x70 <4>[ 574.475329] ? page_fault_oops+0x180/0x4c0 <4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490 <4>[ 574.475346] ? kmem_cache_free+0x257/0x280 <4>[ 574.475357] ? exc_page_fault+0x67/0x150 <4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30 <4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c <4>[ 574.475386] bq_xmit_all+0x158/0x420 <4>[ 574.475397] __dev_flush+0x30/0x90 <4>[ 574.475407] veth_poll+0x216/0x250 [veth] <4>[ 574.475421] __napi_poll+0x28/0x1c0 <4>[ 574.475430] net_rx_action+0x32d/0x3a0 <4>[ 574.475441] handle_softirqs+0xcb/0x2c0 <4>[ 574.475451] do_softirq+0x40/0x60 <4>[ 574.475458] </IRQ> <4>[ 574.475461] <TASK> <4>[ 574.475464] __local_bh_enable_ip+0x66/0x70 <4>[ 574.475471] __dev_queue_xmit+0x268/0xe40 <4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420 <4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0 <4>[ 574.475502] ip6_finish_output2+0x2be/0x640 <4>[ 574.475512] ? nf_hook_slow+0x42/0xf0 <4>[ 574.475521] ip6_finish_output+0x194/0x300 <4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10 <4>[ 574.475538] mld_sendpack+0x17c/0x240 <4>[ 574.475548] mld_ifc_work+0x192/0x410 <4>[ 574.475557] process_one_work+0x15d/0x380 <4>[ 574.475566] worker_thread+0x29d/0x3a0 <4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10 <4>[ 574.475587] kthread+0xcd/0x100 <4>[ 574.475597] ? __pfx_kthread+0x10/0x10 <4>[ 574.475606] ret_from_fork+0x31/0x50 <4>[ 574.475615] ? __pfx_kthread+0x10/0x10 <4>[ 574.475623] ret_from_fork_asm+0x1a/0x ---truncated--- | |||||
| CVE-2024-50266 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+0xd8/0x29c clk_enable+0x2c/0x4c vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core] coreid_power_v4+0x464/0x628 [venus_core] vdec_start_streaming+0xc4/0x510 [venus_dec] vb2_start_streaming+0x6c/0x180 [videobuf2_common] vb2_core_streamon+0x120/0x1dc [videobuf2_common] vb2_streamon+0x1c/0x6c [videobuf2_v4l2] v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem] v4l_streamon+0x24/0x30 [videodev] using the out-of-tree sm8350/sc8280xp venus support. [1] Update also the sm8350/sc8280xp GDSC definitions so that the hw control mode can be changed at runtime as the venus driver now requires. | |||||
| CVE-2024-53056 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy() In mtk_crtc_create(), if the call to mbox_request_channel() fails then we set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation, we do not call cmdq_pkt_create(). During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan" is NULL first before calling cmdq_pkt_destroy(). Calling cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and it will result in a NULL pointer dereference. | |||||
| CVE-2024-53058 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data In case the non-paged data of a SKB carries protocol header and protocol payload to be transmitted on a certain platform that the DMA AXI address width is configured to 40-bit/48-bit, or the size of the non-paged data is bigger than TSO_MAX_BUFF_SIZE on a certain platform that the DMA AXI address width is configured to 32-bit, then this SKB requires at least two DMA transmit descriptors to serve it. For example, three descriptors are allocated to split one DMA buffer mapped from one piece of non-paged data: dma_desc[N + 0], dma_desc[N + 1], dma_desc[N + 2]. Then three elements of tx_q->tx_skbuff_dma[] will be allocated to hold extra information to be reused in stmmac_tx_clean(): tx_q->tx_skbuff_dma[N + 0], tx_q->tx_skbuff_dma[N + 1], tx_q->tx_skbuff_dma[N + 2]. Now we focus on tx_q->tx_skbuff_dma[entry].buf, which is the DMA buffer address returned by DMA mapping call. stmmac_tx_clean() will try to unmap the DMA buffer _ONLY_IF_ tx_q->tx_skbuff_dma[entry].buf is a valid buffer address. The expected behavior that saves DMA buffer address of this non-paged data to tx_q->tx_skbuff_dma[entry].buf is: tx_q->tx_skbuff_dma[N + 0].buf = NULL; tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = dma_map_single(); Unfortunately, the current code misbehaves like this: tx_q->tx_skbuff_dma[N + 0].buf = dma_map_single(); tx_q->tx_skbuff_dma[N + 1].buf = NULL; tx_q->tx_skbuff_dma[N + 2].buf = NULL; On the stmmac_tx_clean() side, when dma_desc[N + 0] is closed by the DMA engine, tx_q->tx_skbuff_dma[N + 0].buf is a valid buffer address obviously, then the DMA buffer will be unmapped immediately. There may be a rare case that the DMA engine does not finish the pending dma_desc[N + 1], dma_desc[N + 2] yet. Now things will go horribly wrong, DMA is going to access a unmapped/unreferenced memory region, corrupted data will be transmited or iommu fault will be triggered :( In contrast, the for-loop that maps SKB fragments behaves perfectly as expected, and that is how the driver should do for both non-paged data and paged frags actually. This patch corrects DMA map/unmap sequences by fixing the array index for tx_q->tx_skbuff_dma[entry].buf when assigning DMA buffer address. Tested and verified on DWXGMAC CORE 3.20a | |||||
| CVE-2024-53062 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: mgb4: protect driver against spectre Frequency range is set from sysfs via frequency_range_store(), being vulnerable to spectre, as reported by smatch: drivers/media/pci/mgb4/mgb4_cmt.c:231 mgb4_cmt_set_vin_freq_range() warn: potential spectre issue 'cmt_vals_in' [r] drivers/media/pci/mgb4/mgb4_cmt.c:238 mgb4_cmt_set_vin_freq_range() warn: possible spectre second half. 'reg_set' Fix it. | |||||
| CVE-2024-50163 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Make sure internal and UAPI bpf_redirect flags don't overlap The bpf_redirect_info is shared between the SKB and XDP redirect paths, and the two paths use the same numeric flag values in the ri->flags field (specifically, BPF_F_BROADCAST == BPF_F_NEXTHOP). This means that if skb bpf_redirect_neigh() is used with a non-NULL params argument and, subsequently, an XDP redirect is performed using the same bpf_redirect_info struct, the XDP path will get confused and end up crashing, which syzbot managed to trigger. With the stack-allocated bpf_redirect_info, the structure is no longer shared between the SKB and XDP paths, so the crash doesn't happen anymore. However, different code paths using identically-numbered flag values in the same struct field still seems like a bit of a mess, so this patch cleans that up by moving the flag definitions together and redefining the three flags in BPF_F_REDIRECT_INTERNAL to not overlap with the flags used for XDP. It also adds a BUILD_BUG_ON() check to make sure the overlap is not re-introduced by mistake. | |||||
| CVE-2024-50151 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOBs when building SMB2_IOCTL request When using encryption, either enforced by the server or when using 'seal' mount option, the client will squash all compound request buffers down for encryption into a single iov in smb2_set_next_command(). SMB2_ioctl_init() allocates a small buffer (448 bytes) to hold the SMB2_IOCTL request in the first iov, and if the user passes an input buffer that is greater than 328 bytes, smb2_set_next_command() will end up writing off the end of @rqst->iov[0].iov_base as shown below: mount.cifs //srv/share /mnt -o ...,seal ln -s $(perl -e "print('a')for 1..1024") /mnt/link BUG: KASAN: slab-out-of-bounds in smb2_set_next_command.cold+0x1d6/0x24c [cifs] Write of size 4116 at addr ffff8881148fcab8 by task ln/859 CPU: 1 UID: 0 PID: 859 Comm: ln Not tainted 6.12.0-rc3 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] print_report+0x156/0x4d9 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] ? __virt_addr_valid+0x145/0x310 ? __phys_addr+0x46/0x90 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_report+0xda/0x110 ? smb2_set_next_command.cold+0x1d6/0x24c [cifs] kasan_check_range+0x10f/0x1f0 __asan_memcpy+0x3c/0x60 smb2_set_next_command.cold+0x1d6/0x24c [cifs] smb2_compound_op+0x238c/0x3840 [cifs] ? kasan_save_track+0x14/0x30 ? kasan_save_free_info+0x3b/0x70 ? vfs_symlink+0x1a1/0x2c0 ? do_symlinkat+0x108/0x1c0 ? __pfx_smb2_compound_op+0x10/0x10 [cifs] ? kmem_cache_free+0x118/0x3e0 ? cifs_get_writable_path+0xeb/0x1a0 [cifs] smb2_get_reparse_inode+0x423/0x540 [cifs] ? __pfx_smb2_get_reparse_inode+0x10/0x10 [cifs] ? rcu_is_watching+0x20/0x50 ? __kmalloc_noprof+0x37c/0x480 ? smb2_create_reparse_symlink+0x257/0x490 [cifs] ? smb2_create_reparse_symlink+0x38f/0x490 [cifs] smb2_create_reparse_symlink+0x38f/0x490 [cifs] ? __pfx_smb2_create_reparse_symlink+0x10/0x10 [cifs] ? find_held_lock+0x8a/0xa0 ? hlock_class+0x32/0xb0 ? __build_path_from_dentry_optional_prefix+0x19d/0x2e0 [cifs] cifs_symlink+0x24f/0x960 [cifs] ? __pfx_make_vfsuid+0x10/0x10 ? __pfx_cifs_symlink+0x10/0x10 [cifs] ? make_vfsgid+0x6b/0xc0 ? generic_permission+0x96/0x2d0 vfs_symlink+0x1a1/0x2c0 do_symlinkat+0x108/0x1c0 ? __pfx_do_symlinkat+0x10/0x10 ? strncpy_from_user+0xaa/0x160 __x64_sys_symlinkat+0xb9/0xf0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08d75c13bb | |||||
| CVE-2024-50042 | 1 Linux | 1 Linux Kernel | 2024-11-22 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: Fix increasing MSI-X on VF Increasing MSI-X value on a VF leads to invalid memory operations. This is caused by not reallocating some arrays. Reproducer: modprobe ice echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count Default MSI-X is 16, so 17 and above triggers this issue. KASAN reports: BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] Read of size 8 at addr ffff8888b937d180 by task bash/28433 (...) Call Trace: (...) ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] kasan_report+0xed/0x120 ? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice] ice_vsi_cfg_def+0x3360/0x4770 [ice] ? mutex_unlock+0x83/0xd0 ? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice] ? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vf_reconfig_vsi+0x114/0x210 [ice] ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice] sriov_vf_msix_count_store+0x21c/0x300 (...) Allocated by task 28201: (...) ice_vsi_cfg_def+0x1c8e/0x4770 [ice] ice_vsi_cfg+0x7f/0x3b0 [ice] ice_vsi_setup+0x179/0xa30 [ice] ice_sriov_configure+0xcaa/0x1520 [ice] sriov_numvfs_store+0x212/0x390 (...) To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This causes the required arrays to be reallocated taking the new queue count into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq before ice_vsi_rebuild(), so that realloc uses the newly set queue count. Additionally, ice_vsi_rebuild() does not remove VSI filters (ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer necessary. | |||||