Filtered by vendor Linux
Subscribe
Total
10223 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-52588 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment"). | |||||
| CVE-2023-52587 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: IB/ipoib: Fix mcast list locking Releasing the `priv->lock` while iterating the `priv->multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel): Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below) -----------------------------------+----------------------------------- ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work) spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...) list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev) &priv->multicast_list, list) | ipoib_mcast_join(dev, mcast) | spin_unlock_irq(&priv->lock) | | spin_lock_irqsave(&priv->lock, flags) | list_for_each_entry_safe(mcast, tmcast, | &priv->multicast_list, list) | list_del(&mcast->list); | list_add_tail(&mcast->list, &remove_list) | spin_unlock_irqrestore(&priv->lock, flags) spin_lock_irq(&priv->lock) | | ipoib_mcast_remove_list(&remove_list) (Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast, `priv->multicast_list` and we keep | remove_list, list) spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done) the other thread which is blocked | and the list is still valid on | it's stack.) Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent eventual sleeps. Unfortunately we could not reproduce the lockup and confirm this fix but based on the code review I think this fix should address such lockups. crash> bc 31 PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2" -- [exception RIP: ipoib_mcast_join_task+0x1b1] RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002 RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000 work (&priv->mcast_task{,.work}) RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000 &mcast->list RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000 R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00 mcast R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8 dev priv (&priv->lock) &priv->multicast_list (aka head) ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 --- <NMI exception stack> --- #5 [ff646f199a8c7e00] ipoib_mcast_join_task+0x1b1 at ffffffffc0944ac1 [ib_ipoib] #6 [ff646f199a8c7e98] process_one_work+0x1a7 at ffffffff9bf10967 crash> rx ff646f199a8c7e68 ff646f199a8c7e68: ff1c6a1a04dc82f8 <<< work = &priv->mcast_task.work crash> list -hO ipoib_dev_priv.multicast_list ff1c6a1a04dc8000 (empty) crash> ipoib_dev_priv.mcast_task.work.func,mcast_mutex.owner.counter ff1c6a1a04dc8000 mcast_task.work.func = 0xffffffffc0944910 <ipoib_mcast_join_task>, mcast_mutex.owner.counter = 0xff1c69998efec000 crash> b 8 PID: 8 TASK: ff1c69998efec000 CPU: 33 COMMAND: "kworker/u72:0" -- #3 [ff646f1980153d50] wait_for_completion+0x96 at ffffffff9c7d7646 #4 [ff646f1980153d90] ipoib_mcast_remove_list+0x56 at ffffffffc0944dc6 [ib_ipoib] #5 [ff646f1980153de8] ipoib_mcast_dev_flush+0x1a7 at ffffffffc09455a7 [ib_ipoib] #6 [ff646f1980153e58] __ipoib_ib_dev_flush+0x1a4 at ffffffffc09431a4 [ib_ipoib] #7 [ff ---truncated--- | |||||
| CVE-2023-52495 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: pmic_glink_altmode: fix port sanity check The PMIC GLINK altmode driver currently supports at most two ports. Fix the incomplete port sanity check on notifications to avoid accessing and corrupting memory beyond the port array if we ever get a notification for an unsupported port. | |||||
| CVE-2024-26618 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Always exit sme_alloc() early with existing storage When sme_alloc() is called with existing storage and we are not flushing we will always allocate new storage, both leaking the existing storage and corrupting the state. Fix this by separating the checks for flushing and for existing storage as we do for SVE. Callers that reallocate (eg, due to changing the vector length) should call sme_free() themselves. | |||||
| CVE-2024-26620 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: always filter entire AP matrix The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration. Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following: guest's AP configuration (all also assigned to the mdev's matrix): 14.0004 14.0005 14.0006 16.0004 16.0005 16.0006 unassign domain 4 unbind queue 16.0005 assign domain 4 When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be: 14.0004 16.0004 Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through. To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix. | |||||
| CVE-2023-1670 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| A flaw use after free in the Linux kernel Xircom 16-bit PCMCIA (PC-card) Ethernet driver was found.A local user could use this flaw to crash the system or potentially escalate their privileges on the system. | |||||
| CVE-2022-4744 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| A double-free flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user registers the device when the register_netdevice function fails (NETDEV_REGISTER notifier). This flaw allows a local user to crash or potentially escalate their privileges on the system. | |||||
| CVE-2024-57951 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ] | |||||
| CVE-2024-57952 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism. | |||||
| CVE-2025-21694 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc: fix softlockup in __read_vmcore (part 2) Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the number of softlockups in __read_vmcore at kdump time have gone down, but they still happen sometimes. In a memory constrained environment like the kdump image, a softlockup is not just a harmless message, but it can interfere with things like RCU freeing memory, causing the crashdump to get stuck. The second loop in __read_vmcore has a lot more opportunities for natural sleep points, like scheduling out while waiting for a data write to happen, but apparently that is not always enough. Add a cond_resched() to the second loop in __read_vmcore to (hopefully) get rid of the softlockups. | |||||
| CVE-2025-21695 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-uart-backlight: fix serdev race The dell_uart_bl_serdev_probe() function calls devm_serdev_device_open() before setting the client ops via serdev_device_set_client_ops(). This ordering can trigger a NULL pointer dereference in the serdev controller's receive_buf handler, as it assumes serdev->ops is valid when SERPORT_ACTIVE is set. This is similar to the issue fixed in commit 5e700b384ec1 ("platform/chrome: cros_ec_uart: properly fix race condition") where devm_serdev_device_open() was called before fully initializing the device. Fix the race by ensuring client ops are set before enabling the port via devm_serdev_device_open(). Note, serdev_device_set_baudrate() and serdev_device_set_flow_control() calls should be after the devm_serdev_device_open() call. | |||||
| CVE-2025-21696 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | |||||
| CVE-2023-52586 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add mutex lock in control vblank irq Add a mutex lock to control vblank irq to synchronize vblank enable/disable operations happening from different threads to prevent race conditions while registering/unregistering the vblank irq callback. v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a parameter of dpu_encoder_phys. -Switch from atomic refcnt to a simple int counter as mutex has now been added v3: Mistakenly did not change wording in last version. It is done now. v2: Slightly changed wording of commit message Patchwork: https://patchwork.freedesktop.org/patch/571854/ | |||||
| CVE-2021-47107 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix READDIR buffer overflow If a client sends a READDIR count argument that is too small (say, zero), then the buffer size calculation in the new init_dirlist helper functions results in an underflow, allowing the XDR stream functions to write beyond the actual buffer. This calculation has always been suspect. NFSD has never sanity- checked the READDIR count argument, but the old entry encoders managed the problem correctly. With the commits below, entry encoding changed, exposing the underflow to the pointer arithmetic in xdr_reserve_space(). Modern NFS clients attempt to retrieve as much data as possible for each READDIR request. Also, we have no unit tests that exercise the behavior of READDIR at the lower bound of @count values. Thus this case was missed during testing. | |||||
| CVE-2021-47105 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: xsk: return xsk buffers back to pool when cleaning the ring Currently we only NULL the xdp_buff pointer in the internal SW ring but we never give it back to the xsk buffer pool. This means that buffers can be leaked out of the buff pool and never be used again. Add missing xsk_buff_free() call to the routine that is supposed to clean the entries that are left in the ring so that these buffers in the umem can be used by other sockets. Also, only go through the space that is actually left to be cleaned instead of a whole ring. | |||||
| CVE-2021-47103 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:234 ---truncated--- | |||||
| CVE-2021-47102 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix incorrect structure access In line: upper = info->upper_dev; We access upper_dev field, which is related only for particular events (e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory access for another events, when ptr is not netdev_notifier_changeupper_info. The KASAN logs are as follows: [ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778 [ 30.139866] [ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6 [ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 30.153056] Call trace: [ 30.155547] dump_backtrace+0x0/0x2c0 [ 30.159320] show_stack+0x18/0x30 [ 30.162729] dump_stack_lvl+0x68/0x84 [ 30.166491] print_address_description.constprop.0+0x74/0x2b8 [ 30.172346] kasan_report+0x1e8/0x250 [ 30.176102] __asan_load8+0x98/0xe0 [ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera] [ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera] [ 30.193313] raw_notifier_call_chain+0x74/0xa0 [ 30.197860] call_netdevice_notifiers_info+0x68/0xc0 [ 30.202924] register_netdevice+0x3cc/0x760 [ 30.207190] register_netdev+0x24/0x50 [ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera] | |||||
| CVE-2021-47097 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Input: elantech - fix stack out of bound access in elantech_change_report_id() The array param[] in elantech_change_report_id() must be at least 3 bytes, because elantech_read_reg_params() is calling ps2_command() with PSMOUSE_CMD_GETINFO, that is going to access 3 bytes from param[], but it's defined in the stack as an array of 2 bytes, therefore we have a potential stack out-of-bounds access here, also confirmed by KASAN: [ 6.512374] BUG: KASAN: stack-out-of-bounds in __ps2_command+0x372/0x7e0 [ 6.512397] Read of size 1 at addr ffff8881024d77c2 by task kworker/2:1/118 [ 6.512416] CPU: 2 PID: 118 Comm: kworker/2:1 Not tainted 5.13.0-22-generic #22+arighi20211110 [ 6.512428] Hardware name: LENOVO 20T8000QGE/20T8000QGE, BIOS R1AET32W (1.08 ) 08/14/2020 [ 6.512436] Workqueue: events_long serio_handle_event [ 6.512453] Call Trace: [ 6.512462] show_stack+0x52/0x58 [ 6.512474] dump_stack+0xa1/0xd3 [ 6.512487] print_address_description.constprop.0+0x1d/0x140 [ 6.512502] ? __ps2_command+0x372/0x7e0 [ 6.512516] __kasan_report.cold+0x7d/0x112 [ 6.512527] ? _raw_write_lock_irq+0x20/0xd0 [ 6.512539] ? __ps2_command+0x372/0x7e0 [ 6.512552] kasan_report+0x3c/0x50 [ 6.512564] __asan_load1+0x6a/0x70 [ 6.512575] __ps2_command+0x372/0x7e0 [ 6.512589] ? ps2_drain+0x240/0x240 [ 6.512601] ? dev_printk_emit+0xa2/0xd3 [ 6.512612] ? dev_vprintk_emit+0xc5/0xc5 [ 6.512621] ? __kasan_check_write+0x14/0x20 [ 6.512634] ? mutex_lock+0x8f/0xe0 [ 6.512643] ? __mutex_lock_slowpath+0x20/0x20 [ 6.512655] ps2_command+0x52/0x90 [ 6.512670] elantech_ps2_command+0x4f/0xc0 [psmouse] [ 6.512734] elantech_change_report_id+0x1e6/0x256 [psmouse] [ 6.512799] ? elantech_report_trackpoint.constprop.0.cold+0xd/0xd [psmouse] [ 6.512863] ? ps2_command+0x7f/0x90 [ 6.512877] elantech_query_info.cold+0x6bd/0x9ed [psmouse] [ 6.512943] ? elantech_setup_ps2+0x460/0x460 [psmouse] [ 6.513005] ? psmouse_reset+0x69/0xb0 [psmouse] [ 6.513064] ? psmouse_attr_set_helper+0x2a0/0x2a0 [psmouse] [ 6.513122] ? phys_pmd_init+0x30e/0x521 [ 6.513137] elantech_init+0x8a/0x200 [psmouse] [ 6.513200] ? elantech_init_ps2+0xf0/0xf0 [psmouse] [ 6.513249] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513296] ? synaptics_send_cmd+0x60/0x60 [psmouse] [ 6.513342] ? elantech_query_info+0x440/0x440 [psmouse] [ 6.513388] ? psmouse_try_protocol+0x11e/0x170 [psmouse] [ 6.513432] psmouse_extensions+0x65d/0x6e0 [psmouse] [ 6.513476] ? psmouse_try_protocol+0x170/0x170 [psmouse] [ 6.513519] ? mutex_unlock+0x22/0x40 [ 6.513526] ? ps2_command+0x7f/0x90 [ 6.513536] ? psmouse_probe+0xa3/0xf0 [psmouse] [ 6.513580] psmouse_switch_protocol+0x27d/0x2e0 [psmouse] [ 6.513624] psmouse_connect+0x272/0x530 [psmouse] [ 6.513669] serio_driver_probe+0x55/0x70 [ 6.513679] really_probe+0x190/0x720 [ 6.513689] driver_probe_device+0x160/0x1f0 [ 6.513697] device_driver_attach+0x119/0x130 [ 6.513705] ? device_driver_attach+0x130/0x130 [ 6.513713] __driver_attach+0xe7/0x1a0 [ 6.513720] ? device_driver_attach+0x130/0x130 [ 6.513728] bus_for_each_dev+0xfb/0x150 [ 6.513738] ? subsys_dev_iter_exit+0x10/0x10 [ 6.513748] ? _raw_write_unlock_bh+0x30/0x30 [ 6.513757] driver_attach+0x2d/0x40 [ 6.513764] serio_handle_event+0x199/0x3d0 [ 6.513775] process_one_work+0x471/0x740 [ 6.513785] worker_thread+0x2d2/0x790 [ 6.513794] ? process_one_work+0x740/0x740 [ 6.513802] kthread+0x1b4/0x1e0 [ 6.513809] ? set_kthread_struct+0x80/0x80 [ 6.513816] ret_from_fork+0x22/0x30 [ 6.513832] The buggy address belongs to the page: [ 6.513838] page:00000000bc35e189 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1024d7 [ 6.513847] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 6.513860] raw: 0 ---truncated--- | |||||
| CVE-2021-47092 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae | |||||
| CVE-2021-47090 | 1 Linux | 1 Linux Kernel | 2025-02-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 | |||||