Filtered by vendor Linux
Subscribe
Total
10223 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-26753 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio/akcipher - Fix stack overflow on memcpy sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o | |||||
| CVE-2024-26766 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix sdma.h tx->num_descs off-by-one error Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable. | |||||
| CVE-2023-52640 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea. | |||||
| CVE-2025-21650 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | |||||
| CVE-2024-57913 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Remove WARN_ON in functionfs_bind This commit addresses an issue related to below kernel panic where panic_on_warn is enabled. It is caused by the unnecessary use of WARN_ON in functionsfs_bind, which easily leads to the following scenarios. 1.adb_write in adbd 2. UDC write via configfs ================= ===================== ->usb_ffs_open_thread() ->UDC write ->open_functionfs() ->configfs_write_iter() ->adb_open() ->gadget_dev_desc_UDC_store() ->adb_write() ->usb_gadget_register_driver_owner ->driver_register() ->StartMonitor() ->bus_add_driver() ->adb_read() ->gadget_bind_driver() <times-out without BIND event> ->configfs_composite_bind() ->usb_add_function() ->open_functionfs() ->ffs_func_bind() ->adb_open() ->functionfs_bind() <ffs->state !=FFS_ACTIVE> The adb_open, adb_read, and adb_write operations are invoked from the daemon, but trying to bind the function is a process that is invoked by UDC write through configfs, which opens up the possibility of a race condition between the two paths. In this race scenario, the kernel panic occurs due to the WARN_ON from functionfs_bind when panic_on_warn is enabled. This commit fixes the kernel panic by removing the unnecessary WARN_ON. Kernel panic - not syncing: kernel: panic_on_warn set ... [ 14.542395] Call trace: [ 14.542464] ffs_func_bind+0x1c8/0x14a8 [ 14.542468] usb_add_function+0xcc/0x1f0 [ 14.542473] configfs_composite_bind+0x468/0x588 [ 14.542478] gadget_bind_driver+0x108/0x27c [ 14.542483] really_probe+0x190/0x374 [ 14.542488] __driver_probe_device+0xa0/0x12c [ 14.542492] driver_probe_device+0x3c/0x220 [ 14.542498] __driver_attach+0x11c/0x1fc [ 14.542502] bus_for_each_dev+0x104/0x160 [ 14.542506] driver_attach+0x24/0x34 [ 14.542510] bus_add_driver+0x154/0x270 [ 14.542514] driver_register+0x68/0x104 [ 14.542518] usb_gadget_register_driver_owner+0x48/0xf4 [ 14.542523] gadget_dev_desc_UDC_store+0xf8/0x144 [ 14.542526] configfs_write_iter+0xf0/0x138 | |||||
| CVE-2025-21639 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: rto_min/max: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the 'net' structure, but that would increase the size of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used. | |||||
| CVE-2025-21637 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the 'net' structure via 'current' is not recommended for different reasons: - Inconsistency: getting info from the reader's/writer's netns vs only from the opener's netns. - current->nsproxy can be NULL in some cases, resulting in an 'Oops' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The 'net' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while 'sctp.ctl_sock' still needs to be retrieved from 'net' structure. | |||||
| CVE-2024-57925 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix a missing return value check bug In the smb2_send_interim_resp(), if ksmbd_alloc_work_struct() fails to allocate a node, it returns a NULL pointer to the in_work pointer. This can lead to an illegal memory write of in_work->response_buf when allocate_interim_rsp_buf() attempts to perform a kzalloc() on it. To address this issue, incorporating a check for the return value of ksmbd_alloc_work_struct() ensures that the function returns immediately upon allocation failure, thereby preventing the aforementioned illegal memory access. | |||||
| CVE-2024-57922 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add check for granularity in dml ceil/floor helpers [Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. (cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) | |||||
| CVE-2022-48424 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel before 6.1.3, fs/ntfs3/inode.c does not validate the attribute name offset. An unhandled page fault may occur. | |||||
| CVE-2022-48423 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel before 6.1.3, fs/ntfs3/record.c does not validate resident attribute names. An out-of-bounds write may occur. | |||||
| CVE-2022-48422 | 2 Linux, Onlyoffice | 2 Linux Kernel, Document Server | 2025-02-27 | N/A | 7.8 HIGH |
| ONLYOFFICE Docs through 7.3 on certain Linux distributions allows local users to gain privileges via a Trojan horse libgcc_s.so.1 in the current working directory, which may be any directory in which an ONLYOFFICE document is located. | |||||
| CVE-2023-25590 | 2 Arubanetworks, Linux | 2 Clearpass Policy Manager, Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| A vulnerability in the ClearPass OnGuard Linux agent could allow malicious users on a Linux instance to elevate their user privileges to those of a higher role. A successful exploit allows malicious users to execute arbitrary code with root level privileges on the Linux instance. | |||||
| CVE-2024-26796 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers: perf: ctr_get_width function for legacy is not defined With parameters CONFIG_RISCV_PMU_LEGACY=y and CONFIG_RISCV_PMU_SBI=n linux kernel crashes when you try perf record: $ perf record ls [ 46.749286] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 46.750199] Oops [#1] [ 46.750342] Modules linked in: [ 46.750608] CPU: 0 PID: 107 Comm: perf-exec Not tainted 6.6.0 #2 [ 46.750906] Hardware name: riscv-virtio,qemu (DT) [ 46.751184] epc : 0x0 [ 46.751430] ra : arch_perf_update_userpage+0x54/0x13e [ 46.751680] epc : 0000000000000000 ra : ffffffff8072ee52 sp : ff2000000022b8f0 [ 46.751958] gp : ffffffff81505988 tp : ff6000000290d400 t0 : ff2000000022b9c0 [ 46.752229] t1 : 0000000000000001 t2 : 0000000000000003 s0 : ff2000000022b930 [ 46.752451] s1 : ff600000028fb000 a0 : 0000000000000000 a1 : ff600000028fb000 [ 46.752673] a2 : 0000000ae2751268 a3 : 00000000004fb708 a4 : 0000000000000004 [ 46.752895] a5 : 0000000000000000 a6 : 000000000017ffe3 a7 : 00000000000000d2 [ 46.753117] s2 : ff600000028fb000 s3 : 0000000ae2751268 s4 : 0000000000000000 [ 46.753338] s5 : ffffffff8153e290 s6 : ff600000863b9000 s7 : ff60000002961078 [ 46.753562] s8 : ff60000002961048 s9 : ff60000002961058 s10: 0000000000000001 [ 46.753783] s11: 0000000000000018 t3 : ffffffffffffffff t4 : ffffffffffffffff [ 46.754005] t5 : ff6000000292270c t6 : ff2000000022bb30 [ 46.754179] status: 0000000200000100 badaddr: 0000000000000000 cause: 000000000000000c [ 46.754653] Code: Unable to access instruction at 0xffffffffffffffec. [ 46.754939] ---[ end trace 0000000000000000 ]--- [ 46.755131] note: perf-exec[107] exited with irqs disabled [ 46.755546] note: perf-exec[107] exited with preempt_count 4 This happens because in the legacy case the ctr_get_width function was not defined, but it is used in arch_perf_update_userpage. Also remove extra check in riscv_pmu_ctr_get_width_mask | |||||
| CVE-2024-26805 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages ---truncated--- | |||||
| CVE-2024-26777 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: sis: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. | |||||
| CVE-2024-26724 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DPLL, Fix possible use after free after delayed work timer triggers I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fo ---truncated--- | |||||
| CVE-2024-26774 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt Determine if bb_fragments is 0 instead of determining bb_free to eliminate the risk of dividing by zero when the block bitmap is corrupted. | |||||
| CVE-2024-26699 | 1 Linux | 1 Linux Kernel | 2025-02-27 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size. | |||||
| CVE-2024-26778 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-02-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. | |||||