Filtered by vendor Linux
Subscribe
Total
10223 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-4440 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/xen: Drop USERGS_SYSRET64 paravirt call commit afd30525a659ac0ae0904f0cb4a2ca75522c3123 upstream. USERGS_SYSRET64 is used to return from a syscall via SYSRET, but a Xen PV guest will nevertheless use the IRET hypercall, as there is no sysret PV hypercall defined. So instead of testing all the prerequisites for doing a sysret and then mangling the stack for Xen PV again for doing an iret just use the iret exit from the beginning. This can easily be done via an ALTERNATIVE like it is done for the sysenter compat case already. It should be noted that this drops the optimization in Xen for not restoring a few registers when returning to user mode, but it seems as if the saved instructions in the kernel more than compensate for this drop (a kernel build in a Xen PV guest was slightly faster with this patch applied). While at it remove the stale sysret32 remnants. [ pawan: Brad Spengler and Salvatore Bonaccorso <carnil@debian.org> reported a problem with the 5.10 backport commit edc702b4a820 ("x86/entry_64: Add VERW just before userspace transition"). When CONFIG_PARAVIRT_XXL=y, CLEAR_CPU_BUFFERS is not executed in syscall_return_via_sysret path as USERGS_SYSRET64 is runtime patched to: .cpu_usergs_sysret64 = { 0x0f, 0x01, 0xf8, 0x48, 0x0f, 0x07 }, // swapgs; sysretq which is missing CLEAR_CPU_BUFFERS. It turns out dropping USERGS_SYSRET64 simplifies the code, allowing CLEAR_CPU_BUFFERS to be explicitly added to syscall_return_via_sysret path. Below is with CONFIG_PARAVIRT_XXL=y and this patch applied: syscall_return_via_sysret: ... <+342>: swapgs <+345>: xchg %ax,%ax <+347>: verw -0x1a2(%rip) <------ <+354>: sysretq ] | |||||
| CVE-2024-39276 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find() Syzbot reports a warning as follows: ============================================ WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290 Modules linked in: CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7 RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419 Call Trace: <TASK> ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375 generic_shutdown_super+0x136/0x2d0 fs/super.c:641 kill_block_super+0x44/0x90 fs/super.c:1675 ext4_kill_sb+0x68/0xa0 fs/ext4/super.c:7327 [...] ============================================ This is because when finding an entry in ext4_xattr_block_cache_find(), if ext4_sb_bread() returns -ENOMEM, the ce's e_refcnt, which has already grown in the __entry_find(), won't be put away, and eventually trigger the above issue in mb_cache_destroy() due to reference count leakage. So call mb_cache_entry_put() on the -ENOMEM error branch as a quick fix. | |||||
| CVE-2024-53143 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix ordering of iput() and watched_objects decrement Ensure the superblock is kept alive until we're done with iput(). Holding a reference to an inode is not allowed unless we ensure the superblock stays alive, which fsnotify does by keeping the watched_objects count elevated, so iput() must happen before the watched_objects decrement. This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the UAF is hard to hit because race orderings that oops are more likely, thanks to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super(). Also, ensure that fsnotify_put_sb_watched_objects() doesn't call fsnotify_sb_watched_objects() on a superblock that may have already been freed, which would cause a UAF read of sb->s_fsnotify_info. | |||||
| CVE-2024-53174 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2024-53177 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: prevent use-after-free due to open_cached_dir error paths If open_cached_dir() encounters an error parsing the lease from the server, the error handling may race with receiving a lease break, resulting in open_cached_dir() freeing the cfid while the queued work is pending. Update open_cached_dir() to drop refs rather than directly freeing the cfid. Have cached_dir_lease_break(), cfids_laundromat_worker(), and invalidate_all_cached_dirs() clear has_lease immediately while still holding cfids->cfid_list_lock, and then use this to also simplify the reference counting in cfids_laundromat_worker() and invalidate_all_cached_dirs(). Fixes this KASAN splat (which manually injects an error and lease break in open_cached_dir()): ================================================================== BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0 Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65 CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Workqueue: cifsiod smb2_cached_lease_break Call Trace: <TASK> dump_stack_lvl+0x77/0xb0 print_report+0xce/0x660 kasan_report+0xd3/0x110 smb2_cached_lease_break+0x27/0xb0 process_one_work+0x50a/0xc50 worker_thread+0x2ba/0x530 kthread+0x17c/0x1c0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 open_cached_dir+0xa7d/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2464: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x51/0x70 kfree+0x174/0x520 open_cached_dir+0x97f/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x33/0x60 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x32/0x100 __queue_work+0x5c9/0x870 queue_work_on+0x82/0x90 open_cached_dir+0x1369/0x1fb0 smb2_query_path_info+0x43c/0x6e0 cifs_get_fattr+0x346/0xf10 cifs_get_inode_info+0x157/0x210 cifs_revalidate_dentry_attr+0x2d1/0x460 cifs_getattr+0x173/0x470 vfs_statx_path+0x10f/0x160 vfs_statx+0xe9/0x150 vfs_fstatat+0x5e/0xc0 __do_sys_newfstatat+0x91/0xf0 do_syscall_64+0x95/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The buggy address belongs to the object at ffff88811cc24c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 16 bytes inside of freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000) | |||||
| CVE-2024-53182 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" This reverts commit bc3b1e9e7c50e1de0f573eea3871db61dd4787de. The bic is associated with sync_bfqq, and bfq_release_process_ref cannot be put into bfq_put_cooperator. kasan report: [ 400.347277] ================================================================== [ 400.347287] BUG: KASAN: slab-use-after-free in bic_set_bfqq+0x200/0x230 [ 400.347420] Read of size 8 at addr ffff88881cab7d60 by task dockerd/5800 [ 400.347430] [ 400.347436] CPU: 24 UID: 0 PID: 5800 Comm: dockerd Kdump: loaded Tainted: G E 6.12.0 #32 [ 400.347450] Tainted: [E]=UNSIGNED_MODULE [ 400.347454] Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.20192059.B64.2207280713 07/28/2022 [ 400.347460] Call Trace: [ 400.347464] <TASK> [ 400.347468] dump_stack_lvl+0x5d/0x80 [ 400.347490] print_report+0x174/0x505 [ 400.347521] kasan_report+0xe0/0x160 [ 400.347541] bic_set_bfqq+0x200/0x230 [ 400.347549] bfq_bic_update_cgroup+0x419/0x740 [ 400.347560] bfq_bio_merge+0x133/0x320 [ 400.347584] blk_mq_submit_bio+0x1761/0x1e20 [ 400.347625] __submit_bio+0x28b/0x7b0 [ 400.347664] submit_bio_noacct_nocheck+0x6b2/0xd30 [ 400.347690] iomap_readahead+0x50c/0x680 [ 400.347731] read_pages+0x17f/0x9c0 [ 400.347785] page_cache_ra_unbounded+0x366/0x4a0 [ 400.347795] filemap_fault+0x83d/0x2340 [ 400.347819] __xfs_filemap_fault+0x11a/0x7d0 [xfs] [ 400.349256] __do_fault+0xf1/0x610 [ 400.349270] do_fault+0x977/0x11a0 [ 400.349281] __handle_mm_fault+0x5d1/0x850 [ 400.349314] handle_mm_fault+0x1f8/0x560 [ 400.349324] do_user_addr_fault+0x324/0x970 [ 400.349337] exc_page_fault+0x76/0xf0 [ 400.349350] asm_exc_page_fault+0x26/0x30 [ 400.349360] RIP: 0033:0x55a480d77375 [ 400.349384] Code: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 3b 66 10 0f 86 ae 02 00 00 55 48 89 e5 48 83 ec 58 48 8b 10 <83> 7a 10 00 0f 84 27 02 00 00 44 0f b6 42 28 44 0f b6 4a 29 41 80 [ 400.349392] RSP: 002b:00007f18c37fd8b8 EFLAGS: 00010216 [ 400.349401] RAX: 00007f18c37fd9d0 RBX: 0000000000000000 RCX: 0000000000000000 [ 400.349407] RDX: 000055a484407d38 RSI: 000000c000e8b0c0 RDI: 0000000000000000 [ 400.349412] RBP: 00007f18c37fd910 R08: 000055a484017f60 R09: 000055a484066f80 [ 400.349417] R10: 0000000000194000 R11: 0000000000000005 R12: 0000000000000008 [ 400.349422] R13: 0000000000000000 R14: 000000c000476a80 R15: 0000000000000000 [ 400.349430] </TASK> [ 400.349452] [ 400.349454] Allocated by task 5800: [ 400.349459] kasan_save_stack+0x30/0x50 [ 400.349469] kasan_save_track+0x14/0x30 [ 400.349475] __kasan_slab_alloc+0x89/0x90 [ 400.349482] kmem_cache_alloc_node_noprof+0xdc/0x2a0 [ 400.349492] bfq_get_queue+0x1ef/0x1100 [ 400.349502] __bfq_get_bfqq_handle_split+0x11a/0x510 [ 400.349511] bfq_insert_requests+0xf55/0x9030 [ 400.349519] blk_mq_flush_plug_list+0x446/0x14c0 [ 400.349527] __blk_flush_plug+0x27c/0x4e0 [ 400.349534] blk_finish_plug+0x52/0xa0 [ 400.349540] _xfs_buf_ioapply+0x739/0xc30 [xfs] [ 400.350246] __xfs_buf_submit+0x1b2/0x640 [xfs] [ 400.350967] xfs_buf_read_map+0x306/0xa20 [xfs] [ 400.351672] xfs_trans_read_buf_map+0x285/0x7d0 [xfs] [ 400.352386] xfs_imap_to_bp+0x107/0x270 [xfs] [ 400.353077] xfs_iget+0x70d/0x1eb0 [xfs] [ 400.353786] xfs_lookup+0x2ca/0x3a0 [xfs] [ 400.354506] xfs_vn_lookup+0x14e/0x1a0 [xfs] [ 400.355197] __lookup_slow+0x19c/0x340 [ 400.355204] lookup_one_unlocked+0xfc/0x120 [ 400.355211] ovl_lookup_single+0x1b3/0xcf0 [overlay] [ 400.355255] ovl_lookup_layer+0x316/0x490 [overlay] [ 400.355295] ovl_lookup+0x844/0x1fd0 [overlay] [ 400.355351] lookup_one_qstr_excl+0xef/0x150 [ 400.355357] do_unlinkat+0x22a/0x620 [ 400.355366] __x64_sys_unlinkat+0x109/0x1e0 [ 400.355375] do_syscall_64+0x82/0x160 [ 400.355384] entry_SYSCALL_64_after_hwframe+0x76/0x7 ---truncated--- | |||||
| CVE-2024-53192 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`. | |||||
| CVE-2024-39462 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: clk: bcm: dvp: Assign ->num before accessing ->hws Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. | |||||
| CVE-2024-39490 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 6.2 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: fix missing sk_buff release in seg6_input_core The seg6_input() function is responsible for adding the SRH into a packet, delegating the operation to the seg6_input_core(). This function uses the skb_cow_head() to ensure that there is sufficient headroom in the sk_buff for accommodating the link-layer header. In the event that the skb_cow_header() function fails, the seg6_input_core() catches the error but it does not release the sk_buff, which will result in a memory leak. This issue was introduced in commit af3b5158b89d ("ipv6: sr: fix BUG due to headroom too small after SRH push") and persists even after commit 7a3f5b0de364 ("netfilter: add netfilter hooks to SRv6 data plane"), where the entire seg6_input() code was refactored to deal with netfilter hooks. The proposed patch addresses the identified memory leak by requiring the seg6_input_core() function to release the sk_buff in the event that skb_cow_head() fails. | |||||
| CVE-2024-39492 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-cmdq: Fix pm_runtime_get_sync() warning in mbox shutdown The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown() will return 1 when pm runtime state is active, and we don't want to get the warning message in this case. So we change the return value < 0 for WARN_ON(). | |||||
| CVE-2024-50280 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix flushing uninitialized delayed_work on cache_ctr error An unexpected WARN_ON from flush_work() may occur when cache creation fails, caused by destroying the uninitialized delayed_work waker in the error path of cache_create(). For example, the warning appears on the superblock checksum error. Reproduce steps: dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890 Fix by pulling out the cancel_delayed_work_sync() from the constructor's error path. This patch doesn't affect the use-after-free fix for concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix UAF in destroy()")) as cache_dtr is not changed. | |||||
| CVE-2024-53095 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free of network namespace. Recently, we got a customer report that CIFS triggers oops while reconnecting to a server. [0] The workload runs on Kubernetes, and some pods mount CIFS servers in non-root network namespaces. The problem rarely happened, but it was always while the pod was dying. The root cause is wrong reference counting for network namespace. CIFS uses kernel sockets, which do not hold refcnt of the netns that the socket belongs to. That means CIFS must ensure the socket is always freed before its netns; otherwise, use-after-free happens. The repro steps are roughly: 1. mount CIFS in a non-root netns 2. drop packets from the netns 3. destroy the netns 4. unmount CIFS We can reproduce the issue quickly with the script [1] below and see the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled. When the socket is TCP, it is hard to guarantee the netns lifetime without holding refcnt due to async timers. Let's hold netns refcnt for each socket as done for SMC in commit 9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler()."). Note that we need to move put_net() from cifs_put_tcp_session() to clean_demultiplex_info(); otherwise, __sock_create() still could touch a freed netns while cifsd tries to reconnect from cifs_demultiplex_thread(). Also, maybe_get_net() cannot be put just before __sock_create() because the code is not under RCU and there is a small chance that the same address happened to be reallocated to another netns. [0]: CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting... CIFS: Serverclose failed 4 times, giving up Unable to handle kernel paging request at virtual address 14de99e461f84a07 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [14de99e461f84a07] address between user and kernel address ranges Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1 Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fib_rules_lookup+0x44/0x238 lr : __fib_lookup+0x64/0xbc sp : ffff8000265db790 x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01 x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580 x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500 x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002 x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294 x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0 x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500 Call trace: fib_rules_lookup+0x44/0x238 __fib_lookup+0x64/0xbc ip_route_output_key_hash_rcu+0x2c4/0x398 ip_route_output_key_hash+0x60/0x8c tcp_v4_connect+0x290/0x488 __inet_stream_connect+0x108/0x3d0 inet_stream_connect+0x50/0x78 kernel_connect+0x6c/0xac generic_ip_conne ---truncated--- | |||||
| CVE-2023-52922 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: Fix UAF in bcm_proc_show() BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80 Read of size 8 at addr ffff888155846230 by task cat/7862 CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xd5/0x150 print_report+0xc1/0x5e0 kasan_report+0xba/0xf0 bcm_proc_show+0x969/0xa80 seq_read_iter+0x4f6/0x1260 seq_read+0x165/0x210 proc_reg_read+0x227/0x300 vfs_read+0x1d5/0x8d0 ksys_read+0x11e/0x240 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Allocated by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0x9e/0xa0 bcm_sendmsg+0x264b/0x44e0 sock_sendmsg+0xda/0x180 ____sys_sendmsg+0x735/0x920 ___sys_sendmsg+0x11d/0x1b0 __sys_sendmsg+0xfa/0x1d0 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7846: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x161/0x1c0 slab_free_freelist_hook+0x119/0x220 __kmem_cache_free+0xb4/0x2e0 rcu_core+0x809/0x1bd0 bcm_op is freed before procfs entry be removed in bcm_release(), this lead to bcm_proc_show() may read the freed bcm_op. | |||||
| CVE-2025-21753 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free when attempting to join an aborted transaction When we are trying to join the current transaction and if it's aborted, we read its 'aborted' field after unlocking fs_info->trans_lock and without holding any extra reference count on it. This means that a concurrent task that is aborting the transaction may free the transaction before we read its 'aborted' field, leading to a use-after-free. Fix this by reading the 'aborted' field while holding fs_info->trans_lock since any freeing task must first acquire that lock and set fs_info->running_transaction to NULL before freeing the transaction. This was reported by syzbot and Dmitry with the following stack traces from KASAN: ================================================================== BUG: KASAN: slab-use-after-free in join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 Read of size 4 at addr ffff888011839024 by task kworker/u4:9/1128 CPU: 0 UID: 0 PID: 1128 Comm: kworker/u4:9 Not tainted 6.13.0-rc7-syzkaller-00019-gc45323b7560e #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: events_unbound btrfs_async_reclaim_data_space Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 join_transaction+0xd9b/0xda0 fs/btrfs/transaction.c:278 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 flush_space+0x448/0xcf0 fs/btrfs/space-info.c:803 btrfs_async_reclaim_data_space+0x159/0x510 fs/btrfs/space-info.c:1321 process_one_work kernel/workqueue.c:3236 [inline] process_scheduled_works+0xa66/0x1840 kernel/workqueue.c:3317 worker_thread+0x870/0xd30 kernel/workqueue.c:3398 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5315: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4329 kmalloc_noprof include/linux/slab.h:901 [inline] join_transaction+0x144/0xda0 fs/btrfs/transaction.c:308 start_transaction+0xaf8/0x1670 fs/btrfs/transaction.c:697 btrfs_create_common+0x1b2/0x2e0 fs/btrfs/inode.c:6572 lookup_open fs/namei.c:3649 [inline] open_last_lookups fs/namei.c:3748 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3984 do_filp_open+0x27f/0x4e0 fs/namei.c:4014 do_sys_openat2+0x13e/0x1d0 fs/open.c:1402 do_sys_open fs/open.c:1417 [inline] __do_sys_creat fs/open.c:1495 [inline] __se_sys_creat fs/open.c:1489 [inline] __x64_sys_creat+0x123/0x170 fs/open.c:1489 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5336: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2353 [inline] slab_free mm/slub.c:4613 [inline] kfree+0x196/0x430 mm/slub.c:4761 cleanup_transaction fs/btrfs/transaction.c:2063 [inline] btrfs_commit_transaction+0x2c97/0x3720 fs/btrfs/transaction.c:2598 insert_balance_item+0x1284/0x20b0 fs/btrfs/volumes.c:3757 btrfs_balance+0x992/ ---truncated--- | |||||
| CVE-2025-21751 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, change error flow on matcher disconnect Currently, when firmware failure occurs during matcher disconnect flow, the error flow of the function reconnects the matcher back and returns an error, which continues running the calling function and eventually frees the matcher that is being disconnected. This leads to a case where we have a freed matcher on the matchers list, which in turn leads to use-after-free and eventual crash. This patch fixes that by not trying to reconnect the matcher back when some FW command fails during disconnect. Note that we're dealing here with FW error. We can't overcome this problem. This might lead to bad steering state (e.g. wrong connection between matchers), and will also lead to resource leakage, as it is the case with any other error handling during resource destruction. However, the goal here is to allow the driver to continue and not crash the machine with use-after-free error. | |||||
| CVE-2025-21739 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup | |||||
| CVE-2024-53222 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix NULL pointer in comp_algorithm_show() LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. | |||||
| CVE-2024-50138 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Use raw_spinlock_t in ringbuf The function __bpf_ringbuf_reserve is invoked from a tracepoint, which disables preemption. Using spinlock_t in this context can lead to a "sleep in atomic" warning in the RT variant. This issue is illustrated in the example below: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 556208, name: test_progs preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 1 INFO: lockdep is turned off. Preemption disabled at: [<ffffd33a5c88ea44>] migrate_enable+0xc0/0x39c CPU: 7 PID: 556208 Comm: test_progs Tainted: G Hardware name: Qualcomm SA8775P Ride (DT) Call trace: dump_backtrace+0xac/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0xac/0xe8 dump_stack+0x18/0x30 __might_resched+0x3bc/0x4fc rt_spin_lock+0x8c/0x1a4 __bpf_ringbuf_reserve+0xc4/0x254 bpf_ringbuf_reserve_dynptr+0x5c/0xdc bpf_prog_ac3d15160d62622a_test_read_write+0x104/0x238 trace_call_bpf+0x238/0x774 perf_call_bpf_enter.isra.0+0x104/0x194 perf_syscall_enter+0x2f8/0x510 trace_sys_enter+0x39c/0x564 syscall_trace_enter+0x220/0x3c0 do_el0_svc+0x138/0x1dc el0_svc+0x54/0x130 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Switch the spinlock to raw_spinlock_t to avoid this error. | |||||
| CVE-2024-42254 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix error pbuf checking Syz reports a problem, which boils down to NULL vs IS_ERR inconsistent error handling in io_alloc_pbuf_ring(). KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__io_remove_buffers+0xac/0x700 io_uring/kbuf.c:341 Call Trace: <TASK> io_put_bl io_uring/kbuf.c:378 [inline] io_destroy_buffers+0x14e/0x490 io_uring/kbuf.c:392 io_ring_ctx_free+0xa00/0x1070 io_uring/io_uring.c:2613 io_ring_exit_work+0x80f/0x8a0 io_uring/io_uring.c:2844 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 | |||||
| CVE-2024-58034 | 1 Linux | 1 Linux Kernel | 2025-03-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: memory: tegra20-emc: fix an OF node reference bug in tegra_emc_find_node_by_ram_code() As of_find_node_by_name() release the reference of the argument device node, tegra_emc_find_node_by_ram_code() releases some device nodes while still in use, resulting in possible UAFs. According to the bindings and the in-tree DTS files, the "emc-tables" node is always device's child node with the property "nvidia,use-ram-code", and the "lpddr2" node is a child of the "emc-tables" node. Thus utilize the for_each_child_of_node() macro and of_get_child_by_name() instead of of_find_node_by_name() to simplify the code. This bug was found by an experimental verification tool that I am developing. [krzysztof: applied v1, adjust the commit msg to incorporate v2 parts] | |||||