Filtered by vendor Linux
Subscribe
Total
10223 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49711 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() In fsl_mc_bus_remove(), mc->root_mc_bus_dev->mc_io is passed to fsl_destroy_mc_io(). However, mc->root_mc_bus_dev is already freed in fsl_mc_device_remove(). Then reference to mc->root_mc_bus_dev->mc_io triggers KASAN use-after-free. To avoid the use-after-free, keep the reference to mc->root_mc_bus_dev->mc_io in a local variable and pass to fsl_destroy_mc_io(). This patch needs rework to apply to kernels older than v5.15. | |||||
| CVE-2022-49695 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: igb: fix a use-after-free issue in igb_clean_tx_ring Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2022-49694 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block: disable the elevator int del_gendisk The elevator is only used for file system requests, which are stopped in del_gendisk. Move disabling the elevator and freeing the scheduler tags to the end of del_gendisk instead of doing that work in disk_release and blk_cleanup_queue to avoid a use after free on q->tag_set from disk_release as the tag_set might not be alive at that point. Move the blk_qos_exit call as well, as it just depends on the elevator exit and would be the only reason to keep the not exactly cheap queue freeze in disk_release. | |||||
| CVE-2022-49685 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix use-after-free on remove Ensure that the irq_work has completed before the trigger is freed. ================================================================== BUG: KASAN: use-after-free in irq_work_run_list Read of size 8 at addr 0000000064702248 by task python3/25 Call Trace: irq_work_run_list irq_work_tick update_process_times tick_sched_handle tick_sched_timer __hrtimer_run_queues hrtimer_interrupt Allocated by task 25: kmem_cache_alloc_trace iio_sysfs_trig_add dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write Freed by task 25: kfree iio_sysfs_trig_remove dev_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write sys_write ================================================================== | |||||
| CVE-2022-49669 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. | |||||
| CVE-2022-49667 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: bonding: fix use-after-free after 802.3ad slave unbind commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 | |||||
| CVE-2022-49651 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: srcu: Tighten cleanup_srcu_struct() GP checks Currently, cleanup_srcu_struct() checks for a grace period in progress, but it does not check for a grace period that has not yet started but which might start at any time. Such a situation could result in a use-after-free bug, so this commit adds a check for a grace period that is needed but not yet started to cleanup_srcu_struct(). | |||||
| CVE-2022-49647 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. | |||||
| CVE-2025-21726 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: avoid UAF for reorder_work Although the previous patch can avoid ps and ps UAF for _do_serial, it can not avoid potential UAF issue for reorder_work. This issue can happen just as below: crypto_request crypto_request crypto_del_alg padata_do_serial ... padata_reorder // processes all remaining // requests then breaks while (1) { if (!padata) break; ... } padata_do_serial // new request added list_add // sees the new request queue_work(reorder_work) padata_reorder queue_work_on(squeue->work) ... <kworker context> padata_serial_worker // completes new request, // no more outstanding // requests crypto_del_alg // free pd <kworker context> invoke_padata_reorder // UAF of pd To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work' into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish. | |||||
| CVE-2025-21727 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ | |||||
| CVE-2025-21729 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix race between cancel_hw_scan and hw_scan completion The rtwdev->scanning flag isn't protected by mutex originally, so cancel_hw_scan can pass the condition, but suddenly hw_scan completion unset the flag and calls ieee80211_scan_completed() that will free local->hw_scan_req. Then, cancel_hw_scan raises null-ptr-deref and use-after-free. Fix it by moving the check condition to where protected by mutex. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 2 PID: 6922 Comm: kworker/2:2 Tainted: G OE Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB6WW (2.76 ) 09/10/2019 Workqueue: events cfg80211_conn_work [cfg80211] RIP: 0010:rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core] Code: 00 45 89 6c 24 1c 0f 85 23 01 00 00 48 8b 85 20 ff ff ff 48 8d RSP: 0018:ffff88811fd9f068 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff88811fd9f258 RCX: 0000000000000001 RDX: 0000000000000011 RSI: 0000000000000001 RDI: 0000000000000089 RBP: ffff88811fd9f170 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88811fd9f108 R11: 0000000000000000 R12: ffff88810e47f960 R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8881d6f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007531dfca55b0 CR3: 00000001be296004 CR4: 00000000001706e0 Call Trace: <TASK> ? show_regs+0x61/0x73 ? __die_body+0x20/0x73 ? die_addr+0x4f/0x7b ? exc_general_protection+0x191/0x1db ? asm_exc_general_protection+0x27/0x30 ? rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core] ? rtw89_fw_h2c_scan_offload_be+0x458/0x13c3 [rtw89_core] ? __pfx_rtw89_fw_h2c_scan_offload_be+0x10/0x10 [rtw89_core] ? do_raw_spin_lock+0x75/0xdb ? __pfx_do_raw_spin_lock+0x10/0x10 rtw89_hw_scan_offload+0xb5e/0xbf7 [rtw89_core] ? _raw_spin_unlock+0xe/0x24 ? __mutex_lock.constprop.0+0x40c/0x471 ? __pfx_rtw89_hw_scan_offload+0x10/0x10 [rtw89_core] ? __mutex_lock_slowpath+0x13/0x1f ? mutex_lock+0xa2/0xdc ? __pfx_mutex_lock+0x10/0x10 rtw89_hw_scan_abort+0x58/0xb7 [rtw89_core] rtw89_ops_cancel_hw_scan+0x120/0x13b [rtw89_core] ieee80211_scan_cancel+0x468/0x4d0 [mac80211] ieee80211_prep_connection+0x858/0x899 [mac80211] ieee80211_mgd_auth+0xbea/0xdde [mac80211] ? __pfx_ieee80211_mgd_auth+0x10/0x10 [mac80211] ? cfg80211_find_elem+0x15/0x29 [cfg80211] ? is_bss+0x1b7/0x1d7 [cfg80211] ieee80211_auth+0x18/0x27 [mac80211] cfg80211_mlme_auth+0x3bb/0x3e7 [cfg80211] cfg80211_conn_do_work+0x410/0xb81 [cfg80211] ? __pfx_cfg80211_conn_do_work+0x10/0x10 [cfg80211] ? __kasan_check_read+0x11/0x1f ? psi_group_change+0x8bc/0x944 ? __kasan_check_write+0x14/0x22 ? mutex_lock+0x8e/0xdc ? __pfx_mutex_lock+0x10/0x10 ? __pfx___radix_tree_lookup+0x10/0x10 cfg80211_conn_work+0x245/0x34d [cfg80211] ? __pfx_cfg80211_conn_work+0x10/0x10 [cfg80211] ? update_cfs_rq_load_avg+0x3bc/0x3d7 ? sched_clock_noinstr+0x9/0x1a ? sched_clock+0x10/0x24 ? sched_clock_cpu+0x7e/0x42e ? newidle_balance+0x796/0x937 ? __pfx_sched_clock_cpu+0x10/0x10 ? __pfx_newidle_balance+0x10/0x10 ? __kasan_check_read+0x11/0x1f ? psi_group_change+0x8bc/0x944 ? _raw_spin_unlock+0xe/0x24 ? raw_spin_rq_unlock+0x47/0x54 ? raw_spin_rq_unlock_irq+0x9/0x1f ? finish_task_switch.isra.0+0x347/0x586 ? __schedule+0x27bf/0x2892 ? mutex_unlock+0x80/0xd0 ? do_raw_spin_lock+0x75/0xdb ? __pfx___schedule+0x10/0x10 process_scheduled_works+0x58c/0x821 worker_thread+0x4c7/0x586 ? __kasan_check_read+0x11/0x1f kthread+0x285/0x294 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x6f ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> | |||||
| CVE-2025-21731 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nbd: don't allow reconnect after disconnect Following process can cause nbd_config UAF: 1) grab nbd_config temporarily; 2) nbd_genl_disconnect() flush all recv_work() and release the initial reference: nbd_genl_disconnect nbd_disconnect_and_put nbd_disconnect flush_workqueue(nbd->recv_workq) if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...)) nbd_config_put -> due to step 1), reference is still not zero 3) nbd_genl_reconfigure() queue recv_work() again; nbd_genl_reconfigure config = nbd_get_config_unlocked(nbd) if (!config) -> succeed if (!test_bit(NBD_RT_BOUND, ...)) -> succeed nbd_reconnect_socket queue_work(nbd->recv_workq, &args->work) 4) step 1) release the reference; 5) Finially, recv_work() will trigger UAF: recv_work nbd_config_put(nbd) -> nbd_config is freed atomic_dec(&config->recv_threads) -> UAF Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so that nbd_genl_reconfigure() will fail. | |||||
| CVE-2024-49570 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10. | |||||
| CVE-2024-58084 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency. | |||||
| CVE-2025-21722 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty() to set a data or metadata buffer as dirty, but it detects that the buffer is not in the uptodate state: WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520 fs/buffer.c:1177 ... Call Trace: <TASK> nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598 nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73 nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344 nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The other is when nilfs_btree_propagate(), which propagates the dirty state to the ancestor nodes of a b-tree that point to a dirty buffer, detects that the origin buffer is not dirty, even though it should be: WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089 nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089 ... Call Trace: <TASK> nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345 nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587 nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006 nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline] nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115 nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline] nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Both of these issues are caused by the callbacks that handle the page/folio write requests, forcibly clear various states, including the working state of the buffers they hold, at unexpected times when they detect read-only fallback. Fix these issues by checking if the buffer is referenced before clearing the page/folio state, and skipping the clear if it is. | |||||
| CVE-2022-48747 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: block: Fix wrong offset in bio_truncate() bio_truncate() clears the buffer outside of last block of bdev, however current bio_truncate() is using the wrong offset of page. So it can return the uninitialized data. This happened when both of truncated/corrupted FS and userspace (via bdev) are trying to read the last of bdev. | |||||
| CVE-2024-54458 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: bsg: Set bsg_queue to NULL after removal Currently, this does not cause any issues, but I believe it is necessary to set bsg_queue to NULL after removing it to prevent potential use-after-free (UAF) access. | |||||
| CVE-2024-58013 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2022-48748 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix memory leak in __allowed_ingress When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false. | |||||
| CVE-2022-48754 | 1 Linux | 1 Linux Kernel | 2025-03-24 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: phylib: fix potential use-after-free Commit bafbdd527d56 ("phylib: Add device reset GPIO support") added call to phy_device_reset(phydev) after the put_device() call in phy_detach(). The comment before the put_device() call says that the phydev might go away with put_device(). Fix potential use-after-free by calling phy_device_reset() before put_device(). | |||||