Total
305210 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38450 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: prevent NULL pointer dereference in mt7925_sta_set_decap_offload() Add a NULL check for msta->vif before accessing its members to prevent a kernel panic in AP mode deployment. This also fix the issue reported in [1]. The crash occurs when this function is triggered before the station is fully initialized. The call trace shows a page fault at mt7925_sta_set_decap_offload() due to accessing resources when msta->vif is NULL. Fix this by adding an early return if msta->vif is NULL and also check wcid.sta is ready. This ensures we only proceed with decap offload configuration when the station's state is properly initialized. [14739.655703] Unable to handle kernel paging request at virtual address ffffffffffffffa0 [14739.811820] CPU: 0 UID: 0 PID: 895854 Comm: hostapd Tainted: G [14739.821394] Tainted: [C]=CRAP, [O]=OOT_MODULE [14739.825746] Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT) [14739.831577] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [14739.838538] pc : mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.845271] lr : mt7925_sta_set_decap_offload+0x58/0x1b8 [mt7925_common] [14739.851985] sp : ffffffc085efb500 [14739.855295] x29: ffffffc085efb500 x28: 0000000000000000 x27: ffffff807803a158 [14739.862436] x26: ffffff8041ececb8 x25: 0000000000000001 x24: 0000000000000001 [14739.869577] x23: 0000000000000001 x22: 0000000000000008 x21: ffffff8041ecea88 [14739.876715] x20: ffffff8041c19ca0 x19: ffffff8078031fe0 x18: 0000000000000000 [14739.883853] x17: 0000000000000000 x16: ffffffe2aeac1110 x15: 000000559da48080 [14739.890991] x14: 0000000000000001 x13: 0000000000000000 x12: 0000000000000000 [14739.898130] x11: 0a10020001008e88 x10: 0000000000001a50 x9 : ffffffe26457bfa0 [14739.905269] x8 : ffffff8042013bb0 x7 : ffffff807fb6cbf8 x6 : dead000000000100 [14739.912407] x5 : dead000000000122 x4 : ffffff80780326c8 x3 : 0000000000000000 [14739.919546] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff8041ececb8 [14739.926686] Call trace: [14739.929130] mt7925_sta_set_decap_offload+0xc0/0x1b8 [mt7925_common] [14739.935505] ieee80211_check_fast_rx+0x19c/0x510 [mac80211] [14739.941344] _sta_info_move_state+0xe4/0x510 [mac80211] [14739.946860] sta_info_move_state+0x1c/0x30 [mac80211] [14739.952116] sta_apply_auth_flags.constprop.0+0x90/0x1b0 [mac80211] [14739.958708] sta_apply_parameters+0x234/0x5e0 [mac80211] [14739.964332] ieee80211_add_station+0xdc/0x190 [mac80211] [14739.969950] nl80211_new_station+0x46c/0x670 [cfg80211] [14739.975516] genl_family_rcv_msg_doit+0xdc/0x150 [14739.980158] genl_rcv_msg+0x218/0x298 [14739.983830] netlink_rcv_skb+0x64/0x138 [14739.987670] genl_rcv+0x40/0x60 [14739.990816] netlink_unicast+0x314/0x380 [14739.994742] netlink_sendmsg+0x198/0x3f0 [14739.998664] __sock_sendmsg+0x64/0xc0 [14740.002324] ____sys_sendmsg+0x260/0x298 [14740.006242] ___sys_sendmsg+0xb4/0x110 | |||||
| CVE-2025-38458 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: atm: clip: Fix NULL pointer dereference in vcc_sendmsg() atmarpd_dev_ops does not implement the send method, which may cause crash as bellow. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246 RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000 RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000 RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287 R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00 R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88 FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:727 ____sys_sendmsg+0x52d/0x830 net/socket.c:2566 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620 __sys_sendmmsg+0x227/0x430 net/socket.c:2709 __do_sys_sendmmsg net/socket.c:2736 [inline] __se_sys_sendmmsg net/socket.c:2733 [inline] __x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2025-38444 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: raid10: cleanup memleak at raid10_make_request If raid10_read_request or raid10_write_request registers a new request and the REQ_NOWAIT flag is set, the code does not free the malloc from the mempool. unreferenced object 0xffff8884802c3200 (size 192): comm "fio", pid 9197, jiffies 4298078271 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A...... 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc c1a049a2): __kmalloc+0x2bb/0x450 mempool_alloc+0x11b/0x320 raid10_make_request+0x19e/0x650 [raid10] md_handle_request+0x3b3/0x9e0 __submit_bio+0x394/0x560 __submit_bio_noacct+0x145/0x530 submit_bio_noacct_nocheck+0x682/0x830 __blkdev_direct_IO_async+0x4dc/0x6b0 blkdev_read_iter+0x1e5/0x3b0 __io_read+0x230/0x1110 io_read+0x13/0x30 io_issue_sqe+0x134/0x1180 io_submit_sqes+0x48c/0xe90 __do_sys_io_uring_enter+0x574/0x8b0 do_syscall_64+0x5c/0xe0 entry_SYSCALL_64_after_hwframe+0x76/0x7e V4: changing backing tree to see if CKI tests will pass. The patch code has not changed between any versions. | |||||
| CVE-2025-52455 | 2025-07-29 | N/A | 5.3 MEDIUM | ||
| Server-Side Request Forgery (SSRF) vulnerability in Salesforce Tableau Server on Windows, Linux (EPS Server modules) allows Resource Location Spoofing. This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. | |||||
| CVE-2025-8181 | 2025-07-29 | 8.3 HIGH | 7.2 HIGH | ||
| A vulnerability, which was classified as critical, was found in TOTOLINK N600R and X2000R 1.0.0.1. This affects an unknown part of the file vsftpd.conf of the component FTP Service. The manipulation leads to least privilege violation. It is possible to initiate the attack remotely. | |||||
| CVE-2025-38455 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight Reject migration of SEV{-ES} state if either the source or destination VM is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the section between incrementing created_vcpus and online_vcpus. The bulk of vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs in parallel, and so sev_info.es_active can get toggled from false=>true in the destination VM after (or during) svm_vcpu_create(), resulting in an SEV{-ES} VM effectively having a non-SEV{-ES} vCPU. The issue manifests most visibly as a crash when trying to free a vCPU's NULL VMSA page in an SEV-ES VM, but any number of things can go wrong. BUG: unable to handle page fault for address: ffffebde00000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline] RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline] RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline] RIP: 0010:PageHead include/linux/page-flags.h:866 [inline] RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067 Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0 RSP: 0018:ffff8984551978d0 EFLAGS: 00010246 RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000 RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000 R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000 R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000 FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0 DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169 svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515 kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396 kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline] kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490 kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895 kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310 kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369 __fput+0x3e4/0x9e0 fs/file_table.c:465 task_work_run+0x1a9/0x220 kernel/task_work.c:227 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x7f0/0x25b0 kernel/exit.c:953 do_group_exit+0x203/0x2d0 kernel/exit.c:1102 get_signal+0x1357/0x1480 kernel/signal.c:3034 arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218 do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f87a898e969 </TASK> Modules linked in: gq(O) gsmi: Log Shutdown Reason 0x03 CR2: ffffebde00000000 ---[ end trace 0000000000000000 ]--- Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing the host is likely desirable due to the VMSA being consumed by hardware. E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a bogus VMSA page. Accessing P ---truncated--- | |||||
| CVE-2025-29630 | 2025-07-29 | N/A | 8.1 HIGH | ||
| An issue in Gardyn 4 allows a remote attacker with the corresponding ssh private key can gain remote root access to affected devices | |||||
| CVE-2025-38463 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: tcp: Correct signedness in skb remaining space calculation Syzkaller reported a bug [1] where sk->sk_forward_alloc can overflow. When we send data, if an skb exists at the tail of the write queue, the kernel will attempt to append the new data to that skb. However, the code that checks for available space in the skb is flawed: ''' copy = size_goal - skb->len ''' The types of the variables involved are: ''' copy: ssize_t (s64 on 64-bit systems) size_goal: int skb->len: unsigned int ''' Due to C's type promotion rules, the signed size_goal is converted to an unsigned int to match skb->len before the subtraction. The result is an unsigned int. When this unsigned int result is then assigned to the s64 copy variable, it is zero-extended, preserving its non-negative value. Consequently, copy is always >= 0. Assume we are sending 2GB of data and size_goal has been adjusted to a value smaller than skb->len. The subtraction will result in copy holding a very large positive integer. In the subsequent logic, this large value is used to update sk->sk_forward_alloc, which can easily cause it to overflow. The syzkaller reproducer uses TCP_REPAIR to reliably create this condition. However, this can also occur in real-world scenarios. The tcp_bound_to_half_wnd() function can also reduce size_goal to a small value. This would cause the subsequent tcp_wmem_schedule() to set sk->sk_forward_alloc to a value close to INT_MAX. Further memory allocation requests would then cause sk_forward_alloc to wrap around and become negative. [1]: https://syzkaller.appspot.com/bug?extid=de6565462ab540f50e47 | |||||
| CVE-2025-8197 | 2025-07-29 | N/A | 5.5 MEDIUM | ||
| A global buffer overflow vulnerability was found in the soup_header_name_to_string function in Libsoup. The `soup_header_name_to_string` function does not validate the `name` parameter passed in, and directly accesses `soup_header_name_strings[name]`. The value of `name` is controllable, when `name` exceeds the index range of `soup_headr_name_string`, it will cause an out-of-bounds access. | |||||
| CVE-2025-38462 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: vsock: Fix transport_{g2h,h2g} TOCTOU vsock_find_cid() and vsock_dev_do_ioctl() may race with module unload. transport_{g2h,h2g} may become NULL after the NULL check. Introduce vsock_transport_local_cid() to protect from a potential null-ptr-deref. KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_find_cid+0x47/0x90 Call Trace: __vsock_bind+0x4b2/0x720 vsock_bind+0x90/0xe0 __sys_bind+0x14d/0x1e0 __x64_sys_bind+0x6e/0xc0 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] RIP: 0010:vsock_dev_do_ioctl.isra.0+0x58/0xf0 Call Trace: __x64_sys_ioctl+0x12d/0x190 do_syscall_64+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | |||||
| CVE-2025-8163 | 2025-07-29 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability, which was classified as critical, was found in deerwms deer-wms-2 up to 3.3. This affects an unknown part of the file /system/role/list. The manipulation of the argument params[dataScope] leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | |||||
| CVE-2025-54385 | 2025-07-29 | N/A | N/A | ||
| XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. In versions between 17.0.0-rc1 to 17.2.2 and versions 16.10.5 and below, it's possible to execute any SQL query in Oracle by using the function like DBMS_XMLGEN or DBMS_XMLQUERY. The XWiki#searchDocuments APIs pass queries directly to Hibernate without sanitization. Even when these APIs enforce a specific SELECT clause, attackers can still inject malicious code through HQL's native function support in other parts of the query (such as the WHERE clause). This is fixed in versions 16.10.6 and 17.3.0-rc-1. | |||||
| CVE-2025-36727 | 2025-07-29 | N/A | 8.3 HIGH | ||
| Inclusion of Functionality from Untrusted Control Sphere vulnerability in Simplehelp.This issue affects Simplehelp: before 5.5.12. | |||||
| CVE-2025-34138 | 2025-07-29 | N/A | N/A | ||
| A vulnerability exists in Sitecore Experience Manager (XM), Experience Platform (XP), Experience Commerce (XC), and Managed Cloud that could allow remote code execution or unauthorized access to information. This vulnerability affects all Experience Platform topologies (XM, XP, XC) from 9.2 Initial Release through 10.4 Initial Release. PaaS and containerized solutions are similarly affected. | |||||
| CVE-2025-5449 | 2025-07-29 | N/A | 4.3 MEDIUM | ||
| A flaw was found in the SFTP server message decoding logic of libssh. The issue occurs due to an incorrect packet length check that allows an integer overflow when handling large payload sizes on 32-bit systems. This issue leads to failed memory allocation and causes the server process to crash, resulting in a denial of service. | |||||
| CVE-2025-29629 | 2025-07-29 | N/A | 8.8 HIGH | ||
| An issue in Gardyn 4 allows a remote attacker to obtain sensitive information and execute arbitrary code via the Gardyn Home component | |||||
| CVE-2025-38443 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_genl_connect() error path There is a use-after-free issue in nbd: block nbd6: Receive control failed (result -104) block nbd6: shutting down sockets ================================================================== BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022 Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67 CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: nbd6-recv recv_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline] recv_work+0x694/0xa80 drivers/block/nbd.c:1022 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> nbd_genl_connect() does not properly stop the device on certain error paths after nbd_start_device() has been called. This causes the error path to put nbd->config while recv_work continue to use the config after putting it, leading to use-after-free in recv_work. This patch moves nbd_start_device() after the backend file creation. | |||||
| CVE-2025-38437 | 2025-07-29 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potential use-after-free in oplock/lease break ack If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice. | |||||
| CVE-2025-52454 | 2025-07-29 | N/A | 5.3 MEDIUM | ||
| Server-Side Request Forgery (SSRF) vulnerability in Salesforce Tableau Server on Windows, Linux (Amazon S3 Connector modules) allows Resource Location Spoofing. This issue affects Tableau Server: before 2025.1.3, before 2024.2.12, before 2023.3.19. | |||||
| CVE-2025-8162 | 2025-07-29 | 6.5 MEDIUM | 6.3 MEDIUM | ||
| A vulnerability, which was classified as critical, has been found in deerwms deer-wms-2 up to 3.3. Affected by this issue is some unknown functionality of the file /system/dept/list. The manipulation of the argument params[dataScope] leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | |||||