Filtered by vendor Redhat
Subscribe
Total
5741 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-1764 | 2 Kiali, Redhat | 2 Kiali, Openshift Service Mesh | 2024-11-21 | 7.5 HIGH | 8.6 HIGH |
| A hard-coded cryptographic key vulnerability in the default configuration file was found in Kiali, all versions prior to 1.15.1. A remote attacker could abuse this flaw by creating their own JWT signed tokens and bypass Kiali authentication mechanisms, possibly gaining privileges to view and alter the Istio configuration. | |||||
| CVE-2020-1762 | 2 Kiali, Redhat | 2 Kiali, Openshift Service Mesh | 2024-11-21 | 7.5 HIGH | 7.0 HIGH |
| An insufficient JWT validation vulnerability was found in Kiali versions 0.4.0 to 1.15.0 and was fixed in Kiali version 1.15.1, wherein a remote attacker could abuse this flaw by stealing a valid JWT cookie and using that to spoof a user session, possibly gaining privileges to view and alter the Istio configuration. | |||||
| CVE-2020-1761 | 1 Redhat | 1 Openshift | 2024-11-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| A flaw was found in the OpenShift web console, where the access token is stored in the browser's local storage. An attacker can use this flaw to get the access token via physical access, or an XSS attack on the victim's browser. This flaw affects openshift/console versions before openshift/console-4. | |||||
| CVE-2020-1760 | 5 Canonical, Debian, Fedoraproject and 2 more | 6 Ubuntu Linux, Debian Linux, Fedora and 3 more | 2024-11-21 | 4.3 MEDIUM | 5.8 MEDIUM |
| A flaw was found in the Ceph Object Gateway, where it supports request sent by an anonymous user in Amazon S3. This flaw could lead to potential XSS attacks due to the lack of proper neutralization of untrusted input. | |||||
| CVE-2020-1759 | 3 Fedoraproject, Linuxfoundation, Redhat | 5 Fedora, Ceph, Ceph Storage and 2 more | 2024-11-21 | 5.8 MEDIUM | 6.4 MEDIUM |
| A vulnerability was found in Red Hat Ceph Storage 4 and Red Hat Openshift Container Storage 4.2 where, A nonce reuse vulnerability was discovered in the secure mode of the messenger v2 protocol, which can allow an attacker to forge auth tags and potentially manipulate the data by leveraging the reuse of a nonce in a session. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. | |||||
| CVE-2020-1758 | 1 Redhat | 2 Keycloak, Openstack | 2024-11-21 | 4.3 MEDIUM | 5.3 MEDIUM |
| A flaw was found in Keycloak in versions before 10.0.0, where it does not perform the TLS hostname verification while sending emails using the SMTP server. This flaw allows an attacker to perform a man-in-the-middle (MITM) attack. | |||||
| CVE-2020-1757 | 1 Redhat | 6 Jboss Data Grid, Jboss Enterprise Application Platform, Jboss Fuse and 3 more | 2024-11-21 | 5.5 MEDIUM | 8.1 HIGH |
| A flaw was found in all undertow-2.x.x SP1 versions prior to undertow-2.0.30.SP1, all undertow-1.x.x and undertow-2.x.x versions prior to undertow-2.1.0.Final, where the Servlet container causes servletPath to normalize incorrectly by truncating the path after semicolon which may lead to an application mapping resulting in the security bypass. | |||||
| CVE-2020-1753 | 3 Debian, Fedoraproject, Redhat | 4 Debian Linux, Fedora, Ansible Engine and 1 more | 2024-11-21 | 2.1 LOW | 5.0 MEDIUM |
| A security flaw was found in Ansible Engine, all Ansible 2.7.x versions prior to 2.7.17, all Ansible 2.8.x versions prior to 2.8.11 and all Ansible 2.9.x versions prior to 2.9.7, when managing kubernetes using the k8s module. Sensitive parameters such as passwords and tokens are passed to kubectl from the command line, not using an environment variable or an input configuration file. This will disclose passwords and tokens from process list and no_log directive from debug module would not have any effect making these secrets being disclosed on stdout and log files. | |||||
| CVE-2020-1751 | 3 Canonical, Gnu, Redhat | 3 Ubuntu Linux, Glibc, Enterprise Linux | 2024-11-21 | 5.9 MEDIUM | 5.1 MEDIUM |
| An out-of-bounds write vulnerability was found in glibc before 2.31 when handling signal trampolines on PowerPC. Specifically, the backtrace function did not properly check the array bounds when storing the frame address, resulting in a denial of service or potential code execution. The highest threat from this vulnerability is to system availability. | |||||
| CVE-2020-1750 | 1 Redhat | 1 Machine-config-operator | 2024-11-21 | 4.0 MEDIUM | 6.5 MEDIUM |
| A flaw was found in the machine-config-operator that causes an OpenShift node to become unresponsive when a container consumes a large amount of memory. An attacker could use this flaw to deny access to schedule new pods in the OpenShift cluster. This was fixed in openshift/machine-config-operator 4.4.3, openshift/machine-config-operator 4.3.25, openshift/machine-config-operator 4.2.36. | |||||
| CVE-2020-1749 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Enterprise Mrg | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A flaw was found in the Linux kernel's implementation of some networking protocols in IPsec, such as VXLAN and GENEVE tunnels over IPv6. When an encrypted tunnel is created between two hosts, the kernel isn't correctly routing tunneled data over the encrypted link; rather sending the data unencrypted. This would allow anyone in between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality. | |||||
| CVE-2020-1748 | 1 Redhat | 3 Decision Manager, Process Automation, Wildfly Elytron | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| A flaw was found in all supported versions before wildfly-elytron-1.6.8.Final-redhat-00001, where the WildFlySecurityManager checks were bypassed when using custom security managers, resulting in an improper authorization. This flaw leads to information exposure by unauthenticated access to secure resources. | |||||
| CVE-2020-1746 | 2 Debian, Redhat | 3 Debian Linux, Ansible Engine, Ansible Tower | 2024-11-21 | 1.9 LOW | 5.0 MEDIUM |
| A flaw was found in the Ansible Engine affecting Ansible Engine versions 2.7.x before 2.7.17 and 2.8.x before 2.8.11 and 2.9.x before 2.9.7 as well as Ansible Tower before and including versions 3.4.5 and 3.5.5 and 3.6.3 when the ldap_attr and ldap_entry community modules are used. The issue discloses the LDAP bind password to stdout or a log file if a playbook task is written using the bind_pw in the parameters field. The highest threat from this vulnerability is data confidentiality. | |||||
| CVE-2020-1745 | 1 Redhat | 1 Undertow | 2024-11-21 | 7.5 HIGH | 8.6 HIGH |
| A file inclusion vulnerability was found in the AJP connector enabled with a default AJP configuration port of 8009 in Undertow version 2.0.29.Final and before and was fixed in 2.0.30.Final. A remote, unauthenticated attacker could exploit this vulnerability to read web application files from a vulnerable server. In instances where the vulnerable server allows file uploads, an attacker could upload malicious JavaServer Pages (JSP) code within a variety of file types and trigger this vulnerability to gain remote code execution. | |||||
| CVE-2020-1744 | 1 Redhat | 1 Keycloak | 2024-11-21 | 6.8 MEDIUM | 5.6 MEDIUM |
| A flaw was found in keycloak before version 9.0.1. When configuring an Conditional OTP Authentication Flow as a post login flow of an IDP, the failure login events for OTP are not being sent to the brute force protection event queue. So BruteForceProtector does not handle this events. | |||||
| CVE-2020-1742 | 2 Nmstate, Redhat | 2 Kubernetes-nmstate, Openshift Virtualization | 2024-11-21 | 4.4 MEDIUM | 7.0 HIGH |
| An insecure modification vulnerability flaw was found in containers using nmstate/kubernetes-nmstate-handler. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges. Versions before kubernetes-nmstate-handler-container-v2.3.0-30 are affected. | |||||
| CVE-2020-1741 | 1 Redhat | 1 Openshift Container Platform | 2024-11-21 | 4.0 MEDIUM | 5.9 MEDIUM |
| A flaw was found in openshift-ansible. OpenShift Container Platform (OCP) 3.11 is too permissive in the way it specified CORS allowed origins during installation. An attacker, able to man-in-the-middle the connection between the user's browser and the openshift console, could use this flaw to perform a phishing attack. The main threat from this vulnerability is data confidentiality. | |||||
| CVE-2020-1740 | 3 Debian, Fedoraproject, Redhat | 6 Debian Linux, Fedora, Ansible and 3 more | 2024-11-21 | 1.9 LOW | 3.9 LOW |
| A flaw was found in Ansible Engine when using Ansible Vault for editing encrypted files. When a user executes "ansible-vault edit", another user on the same computer can read the old and new secret, as it is created in a temporary file with mkstemp and the returned file descriptor is closed and the method write_data is called to write the existing secret in the file. This method will delete the file before recreating it insecurely. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable. | |||||
| CVE-2020-1739 | 3 Debian, Fedoraproject, Redhat | 6 Debian Linux, Fedora, Ansible and 3 more | 2024-11-21 | 3.3 LOW | 3.9 LOW |
| A flaw was found in Ansible 2.7.16 and prior, 2.8.8 and prior, and 2.9.5 and prior when a password is set with the argument "password" of svn module, it is used on svn command line, disclosing to other users within the same node. An attacker could take advantage by reading the cmdline file from that particular PID on the procfs. | |||||
| CVE-2020-1738 | 1 Redhat | 4 Ansible, Ansible Tower, Cloudforms Management Engine and 1 more | 2024-11-21 | 2.6 LOW | 3.9 LOW |
| A flaw was found in Ansible Engine when the module package or service is used and the parameter 'use' is not specified. If a previous task is executed with a malicious user, the module sent can be selected by the attacker using the ansible facts file. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable. | |||||