Total
435 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-47185 | 1 Linux | 1 Linux Kernel | 2025-03-21 | N/A | 4.4 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. | |||||
| CVE-2024-29172 | 1 Dell | 1 Bsafe Ssl-j | 2025-03-19 | N/A | 5.9 MEDIUM |
| Dell BSAFE SSL-J, versions prior to 6.6 and versions 7.0 through 7.2, contains a deadlock vulnerability. A remote attacker could potentially exploit this vulnerability, leading to a Denial of Service. | |||||
| CVE-2021-47632 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/set_memory: Avoid spinlock recursion in change_page_attr() Commit 1f9ad21c3b38 ("powerpc/mm: Implement set_memory() routines") included a spin_lock() to change_page_attr() in order to safely perform the three step operations. But then commit 9f7853d7609d ("powerpc/mm: Fix set_memory_*() against concurrent accesses") modify it to use pte_update() and do the operation safely against concurrent access. In the meantime, Maxime reported some spinlock recursion. [ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217 [ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0 [ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523 [ 15.373350] Workqueue: events do_free_init [ 15.377615] Call Trace: [ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable) [ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4 [ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0 [ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8 [ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94 [ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310 [ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134 [ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8 [ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c [ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8 [ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94 [ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8 [ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8 [ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210 [ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c Remove the read / modify / write sequence to make the operation atomic and remove the spin_lock() in change_page_attr(). To do the operation atomically, we can't use pte modification helpers anymore. Because all platforms have different combination of bits, it is not easy to use those bits directly. But all have the _PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare two sets to know which bits are set or cleared. For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you know which bit gets cleared and which bit get set when changing exec permission. | |||||
| CVE-2021-47637 | 1 Linux | 1 Linux Kernel | 2025-03-18 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix deadlock in concurrent rename whiteout and inode writeback Following hung tasks: [ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132 [ 77.028820] Call Trace: [ 77.029027] schedule+0x8c/0x1b0 [ 77.029067] mutex_lock+0x50/0x60 [ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs] [ 77.029117] __writeback_single_inode+0x43c/0x570 [ 77.029128] writeback_sb_inodes+0x259/0x740 [ 77.029148] wb_writeback+0x107/0x4d0 [ 77.029163] wb_workfn+0x162/0x7b0 [ 92.390442] task:aa state:D stack: 0 pid: 1506 [ 92.390448] Call Trace: [ 92.390458] schedule+0x8c/0x1b0 [ 92.390461] wb_wait_for_completion+0x82/0xd0 [ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110 [ 92.390472] writeback_inodes_sb_nr+0x14/0x20 [ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs] [ 92.390503] do_rename.cold+0x7f/0x187 [ubifs] [ 92.390549] ubifs_rename+0x8b/0x180 [ubifs] [ 92.390571] vfs_rename+0xdb2/0x1170 [ 92.390580] do_renameat2+0x554/0x770 , are caused by concurrent rename whiteout and inode writeback processes: rename_whiteout(Thread 1) wb_workfn(Thread2) ubifs_rename do_rename lock_4_inodes (Hold ui_mutex) ubifs_budget_space make_free_space shrink_liability __writeback_inodes_sb_nr bdi_split_work_to_wbs (Queue new wb work) wb_do_writeback(wb work) __writeback_single_inode ubifs_write_inode LOCK(ui_mutex) ↑ wb_wait_for_completion (Wait wb work) <-- deadlock! Reproducer (Detail program in [Link]): 1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT) 2. Consume out of space before kernel(mdelay) doing budget for whiteout Fix it by doing whiteout space budget before locking ubifs inodes. BTW, it also fixes wrong goto tag 'out_release' in whiteout budget error handling path(It should at least recover dir i_size and unlock 4 ubifs inodes). | |||||
| CVE-2022-49309 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback() There is a deadlock in rtw_surveydone_event_callback(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_surveydone_event_callback()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_scan_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_surveydone_event_callback() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() in rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise, spin_lock_bh() will also cause deadlock() in timer handler. | |||||
| CVE-2022-49311 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192bs: Fix deadlock in rtw_joinbss_event_prehandle() There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_joinbss_event_prehandle()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | _rtw_join_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_joinbss_event_prehandle() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() to spin_lock_irq() in _rtw_join_timeout_handler() in order to prevent deadlock. | |||||
| CVE-2022-49531 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon. | |||||
| CVE-2022-49441 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: fix deadlock caused by calling printk() under tty_port->lock pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 ---truncated--- | |||||
| CVE-2022-49496 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: prevent kernel crash when rmmod mtk-vcodec-dec.ko If the driver support subdev mode, the parameter "dev->pm.dev" will be NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod mtk-vcodec-dec.ko. [ 4380.702726] pc : do_raw_spin_trylock+0x4/0x80 [ 4380.707075] lr : _raw_spin_lock_irq+0x90/0x14c [ 4380.711509] sp : ffff80000819bc10 [ 4380.714811] x29: ffff80000819bc10 x28: ffff3600c03e4000 x27: 0000000000000000 [ 4380.721934] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 4380.729057] x23: ffff3600c0f34930 x22: ffffd5e923549000 x21: 0000000000000220 [ 4380.736179] x20: 0000000000000208 x19: ffffd5e9213e8ebc x18: 0000000000000020 [ 4380.743298] x17: 0000002000000000 x16: ffffd5e9213e8e90 x15: 696c346f65646976 [ 4380.750420] x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 [ 4380.757542] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 4380.764664] x8 : 0000000000000000 x7 : ffff3600c7273ae8 x6 : ffffd5e9213e8ebc [ 4380.771786] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 [ 4380.778908] x2 : 0000000000000000 x1 : ffff3600c03e4000 x0 : 0000000000000208 [ 4380.786031] Call trace: [ 4380.788465] do_raw_spin_trylock+0x4/0x80 [ 4380.792462] __pm_runtime_disable+0x2c/0x1b0 [ 4380.796723] mtk_vcodec_dec_remove+0x5c/0xa0 [mtk_vcodec_dec] [ 4380.802466] platform_remove+0x2c/0x60 [ 4380.806204] __device_release_driver+0x194/0x250 [ 4380.810810] driver_detach+0xc8/0x15c [ 4380.814462] bus_remove_driver+0x5c/0xb0 [ 4380.818375] driver_unregister+0x34/0x64 [ 4380.822288] platform_driver_unregister+0x18/0x24 [ 4380.826979] mtk_vcodec_dec_driver_exit+0x1c/0x888 [mtk_vcodec_dec] [ 4380.833240] __arm64_sys_delete_module+0x190/0x224 [ 4380.838020] invoke_syscall+0x48/0x114 [ 4380.841760] el0_svc_common.constprop.0+0x60/0x11c [ 4380.846540] do_el0_svc+0x28/0x90 [ 4380.849844] el0_svc+0x4c/0x100 [ 4380.852975] el0t_64_sync_handler+0xec/0xf0 [ 4380.857148] el0t_64_sync+0x190/0x194 [ 4380.860801] Code: 94431515 17ffffca d503201f d503245f (b9400004) | |||||
| CVE-2022-49446 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix firmware activation deadlock scenarios Lockdep reports the following deadlock scenarios for CXL root device power-management, device_prepare(), operations, and device_shutdown() operations for 'nd_region' devices: Chain exists of: &nvdimm_region_key --> &nvdimm_bus->reconfig_mutex --> system_transition_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(system_transition_mutex); lock(&nvdimm_bus->reconfig_mutex); lock(system_transition_mutex); lock(&nvdimm_region_key); Chain exists of: &cxl_nvdimm_bridge_key --> acpi_scan_lock --> &cxl_root_key Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&cxl_root_key); lock(acpi_scan_lock); lock(&cxl_root_key); lock(&cxl_nvdimm_bridge_key); These stem from holding nvdimm_bus_lock() over hibernate_quiet_exec() which walks the entire system device topology taking device_lock() along the way. The nvdimm_bus_lock() is protecting against unregistration, multiple simultaneous ops callers, and preventing activate_show() from racing activate_store(). For the first 2, the lock is redundant. Unregistration already flushes all ops users, and sysfs already prevents multiple threads to be active in an ops handler at the same time. For the last userspace should already be waiting for its last activate_store() to complete, and does not need activate_show() to flush the write side, so this lock usage can be deleted in these attributes. | |||||
| CVE-2024-26740 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog for mirred ingress The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. | |||||
| CVE-2024-26679 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: inet: read sk->sk_family once in inet_recv_error() inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning. | |||||
| CVE-2024-26686 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig->stats_lock to gather the statistics outside of ->siglock protected section, in the likely case this code will run lockless. | |||||
| CVE-2024-26696 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device. | |||||
| CVE-2023-52632 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix lock dependency warning with srcu ====================================================== WARNING: possible circular locking dependency detected 6.5.0-kfd-yangp #2289 Not tainted ------------------------------------------------------ kworker/0:2/996 is trying to acquire lock: (srcu){.+.+}-{0:0}, at: __synchronize_srcu+0x5/0x1a0 but task is already holding lock: ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}, at: process_one_work+0x211/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 svm_range_list_lock_and_flush_work+0x3d/0x110 [amdgpu] svm_range_set_attr+0xd6/0x14c0 [amdgpu] kfd_ioctl+0x1d1/0x630 [amdgpu] __x64_sys_ioctl+0x88/0xc0 -> #2 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0x99/0xc70 amdgpu_amdkfd_gpuvm_restore_process_bos+0x54/0x740 [amdgpu] restore_process_helper+0x22/0x80 [amdgpu] restore_process_worker+0x2d/0xa0 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 -> #1 ((work_completion)(&(&process->restore_work)->work)){+.+.}-{0:0}: __flush_work+0x88/0x4f0 __cancel_work_timer+0x12c/0x1c0 kfd_process_notifier_release_internal+0x37/0x1f0 [amdgpu] __mmu_notifier_release+0xad/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 do_exit+0x322/0xb90 do_group_exit+0x37/0xa0 __x64_sys_exit_group+0x18/0x20 do_syscall_64+0x38/0x80 -> #0 (srcu){.+.+}-{0:0}: __lock_acquire+0x1521/0x2510 lock_sync+0x5f/0x90 __synchronize_srcu+0x4f/0x1a0 __mmu_notifier_release+0x128/0x240 exit_mmap+0x6a/0x3a0 mmput+0x6a/0x120 svm_range_deferred_list_work+0x19f/0x350 [amdgpu] process_one_work+0x29b/0x560 worker_thread+0x3d/0x3d0 other info that might help us debug this: Chain exists of: srcu --> &info->lock#2 --> (work_completion)(&svms->deferred_list_work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); sync(srcu); | |||||
| CVE-2022-49316 | 1 Linux | 1 Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4: Don't hold the layoutget locks across multiple RPC calls When doing layoutget as part of the open() compound, we have to be careful to release the layout locks before we can call any further RPC calls, such as setattr(). The reason is that those calls could trigger a recall, which could deadlock. | |||||
| CVE-2022-49315 | 1 Linux | 1 Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8192e: Fix deadlock in rtllib_beacons_stop() There is a deadlock in rtllib_beacons_stop(), which is shown below: (Thread 1) | (Thread 2) | rtllib_send_beacon() rtllib_beacons_stop() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rtllib_send_beacon_cb() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold ieee->beacon_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need ieee->beacon_lock in position (2) of thread 2. As a result, rtllib_beacons_stop() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. | |||||
| CVE-2022-49327 | 1 Linux | 1 Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bcache: avoid journal no-space deadlock by reserving 1 journal bucket The journal no-space deadlock was reported time to time. Such deadlock can happen in the following situation. When all journal buckets are fully filled by active jset with heavy write I/O load, the cache set registration (after a reboot) will load all active jsets and inserting them into the btree again (which is called journal replay). If a journaled bkey is inserted into a btree node and results btree node split, new journal request might be triggered. For example, the btree grows one more level after the node split, then the root node record in cache device super block will be upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no space in journal buckets, the journal replay has to wait for new journal bucket to be reclaimed after at least one journal bucket replayed. This is one example that how the journal no-space deadlock happens. The solution to avoid the deadlock is to reserve 1 journal bucket in run time, and only permit the reserved journal bucket to be used during cache set registration procedure for things like journal replay. Then the journal space will never be fully filled, there is no chance for journal no-space deadlock to happen anymore. This patch adds a new member "bool do_reserve" in struct journal, it is inititalized to 0 (false) when struct journal is allocated, and set to 1 (true) by bch_journal_space_reserve() when all initialization done in run_cache_set(). In the run time when journal_reclaim() tries to allocate a new journal bucket, free_journal_buckets() is called to check whether there are enough free journal buckets to use. If there is only 1 free journal bucket and journal->do_reserve is 1 (true), the last bucket is reserved and free_journal_buckets() will return 0 to indicate no free journal bucket. Then journal_reclaim() will give up, and try next time to see whetheer there is free journal bucket to allocate. By this method, there is always 1 jouranl bucket reserved in run time. During the cache set registration, journal->do_reserve is 0 (false), so the reserved journal bucket can be used to avoid the no-space deadlock. | |||||
| CVE-2022-49123 | 1 Linux | 1 Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: Fix frames flush failure caused by deadlock We are seeing below warnings: kernel: [25393.301506] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421509] ath11k_pci 0000:01:00.0: failed to flush mgmt transmit queue 0 kernel: [25398.421831] ath11k_pci 0000:01:00.0: dropping mgmt frame for vdev 0, is_started 0 this means ath11k fails to flush mgmt. frames because wmi_mgmt_tx_work has no chance to run in 5 seconds. By setting /proc/sys/kernel/hung_task_timeout_secs to 20 and increasing ATH11K_FLUSH_TIMEOUT to 50 we get below warnings: kernel: [ 120.763160] INFO: task wpa_supplicant:924 blocked for more than 20 seconds. kernel: [ 120.763169] Not tainted 5.10.90 #12 kernel: [ 120.763177] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [ 120.763186] task:wpa_supplicant state:D stack: 0 pid: 924 ppid: 1 flags:0x000043a0 kernel: [ 120.763201] Call Trace: kernel: [ 120.763214] __schedule+0x785/0x12fa kernel: [ 120.763224] ? lockdep_hardirqs_on_prepare+0xe2/0x1bb kernel: [ 120.763242] schedule+0x7e/0xa1 kernel: [ 120.763253] schedule_timeout+0x98/0xfe kernel: [ 120.763266] ? run_local_timers+0x4a/0x4a kernel: [ 120.763291] ath11k_mac_flush_tx_complete+0x197/0x2b1 [ath11k 13c3a9bf37790f4ac8103b3decf7ab4008ac314a] kernel: [ 120.763306] ? init_wait_entry+0x2e/0x2e kernel: [ 120.763343] __ieee80211_flush_queues+0x167/0x21f [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763378] __ieee80211_recalc_idle+0x105/0x125 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763411] ieee80211_recalc_idle+0x14/0x27 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763441] ieee80211_free_chanctx+0x77/0xa2 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763473] __ieee80211_vif_release_channel+0x100/0x131 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763540] ieee80211_vif_release_channel+0x66/0x81 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763572] ieee80211_destroy_auth_data+0xa3/0xe6 [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763612] ieee80211_mgd_deauth+0x178/0x29b [mac80211 335da900954f1c5ea7f1613d92088ce83342042c] kernel: [ 120.763654] cfg80211_mlme_deauth+0x1a8/0x22c [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763697] nl80211_deauthenticate+0xfa/0x123 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763715] genl_rcv_msg+0x392/0x3c2 kernel: [ 120.763750] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763782] ? nl80211_associate+0x432/0x432 [cfg80211 8945aa5bc2af5f6972336665d8ad6f9c191ad5be] kernel: [ 120.763802] ? genl_rcv+0x36/0x36 kernel: [ 120.763814] netlink_rcv_skb+0x89/0xf7 kernel: [ 120.763829] genl_rcv+0x28/0x36 kernel: [ 120.763840] netlink_unicast+0x179/0x24b kernel: [ 120.763854] netlink_sendmsg+0x393/0x401 kernel: [ 120.763872] sock_sendmsg+0x72/0x76 kernel: [ 120.763886] ____sys_sendmsg+0x170/0x1e6 kernel: [ 120.763897] ? copy_msghdr_from_user+0x7a/0xa2 kernel: [ 120.763914] ___sys_sendmsg+0x95/0xd1 kernel: [ 120.763940] __sys_sendmsg+0x85/0xbf kernel: [ 120.763956] do_syscall_64+0x43/0x55 kernel: [ 120.763966] entry_SYSCALL_64_after_hwframe+0x44/0xa9 kernel: [ 120.763977] RIP: 0033:0x79089f3fcc83 kernel: [ 120.763986] RSP: 002b:00007ffe604f0508 EFLAGS: 00000246 ORIG_RAX: 000000000000002e kernel: [ 120.763997] RAX: ffffffffffffffda RBX: 000059b40e987690 RCX: 000079089f3fcc83 kernel: [ 120.764006] RDX: 0000000000000000 RSI: 00007ffe604f0558 RDI: 0000000000000009 kernel: [ 120.764014] RBP: 00007ffe604f0540 R08: 0000000000000004 R09: 0000000000400000 kernel: [ 120.764023] R10: 00007ffe604f0638 R11: 0000000000000246 R12: 000059b40ea04980 kernel: [ 120.764032] R13: 00007ffe604 ---truncated--- | |||||
| CVE-2021-47128 | 1 Linux | 1 Linux Kernel | 2025-03-13 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf, lockdown, audit: Fix buggy SELinux lockdown permission checks Commit 59438b46471a ("security,lockdown,selinux: implement SELinux lockdown") added an implementation of the locked_down LSM hook to SELinux, with the aim to restrict which domains are allowed to perform operations that would breach lockdown. This is indirectly also getting audit subsystem involved to report events. The latter is problematic, as reported by Ondrej and Serhei, since it can bring down the whole system via audit: 1) The audit events that are triggered due to calls to security_locked_down() can OOM kill a machine, see below details [0]. 2) It also seems to be causing a deadlock via avc_has_perm()/slow_avc_audit() when trying to wake up kauditd, for example, when using trace_sched_switch() tracepoint, see details in [1]. Triggering this was not via some hypothetical corner case, but with existing tools like runqlat & runqslower from bcc, for example, which make use of this tracepoint. Rough call sequence goes like: rq_lock(rq) -> -------------------------+ trace_sched_switch() -> | bpf_prog_xyz() -> +-> deadlock selinux_lockdown() -> | audit_log_end() -> | wake_up_interruptible() -> | try_to_wake_up() -> | rq_lock(rq) --------------+ What's worse is that the intention of 59438b46471a to further restrict lockdown settings for specific applications in respect to the global lockdown policy is completely broken for BPF. The SELinux policy rule for the current lockdown check looks something like this: allow <who> <who> : lockdown { <reason> }; However, this doesn't match with the 'current' task where the security_locked_down() is executed, example: httpd does a syscall. There is a tracing program attached to the syscall which triggers a BPF program to run, which ends up doing a bpf_probe_read_kernel{,_str}() helper call. The selinux_lockdown() hook does the permission check against 'current', that is, httpd in this example. httpd has literally zero relation to this tracing program, and it would be nonsensical having to write an SELinux policy rule against httpd to let the tracing helper pass. The policy in this case needs to be against the entity that is installing the BPF program. For example, if bpftrace would generate a histogram of syscall counts by user space application: bpftrace -e 'tracepoint:raw_syscalls:sys_enter { @[comm] = count(); }' bpftrace would then go and generate a BPF program from this internally. One way of doing it [for the sake of the example] could be to call bpf_get_current_task() helper and then access current->comm via one of bpf_probe_read_kernel{,_str}() helpers. So the program itself has nothing to do with httpd or any other random app doing a syscall here. The BPF program _explicitly initiated_ the lockdown check. The allow/deny policy belongs in the context of bpftrace: meaning, you want to grant bpftrace access to use these helpers, but other tracers on the system like my_random_tracer _not_. Therefore fix all three issues at the same time by taking a completely different approach for the security_locked_down() hook, that is, move the check into the program verification phase where we actually retrieve the BPF func proto. This also reliably gets the task (current) that is trying to install the BPF tracing program, e.g. bpftrace/bcc/perf/systemtap/etc, and it also fixes the OOM since we're moving this out of the BPF helper's fast-path which can be called several millions of times per second. The check is then also in line with other security_locked_down() hooks in the system where the enforcement is performed at open/load time, for example, open_kcore() for /proc/kcore access or module_sig_check() for module signatures just to pick f ---truncated--- | |||||