Total
4147 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-47399 | 1 Linux | 1 Linux Kernel | 2024-12-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. | |||||
| CVE-2024-41884 | 2024-12-24 | N/A | N/A | ||
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR. If an attacker does not enter any value for a specific URL parameter, NULL pointer references will occur and the NVR will reboot. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. | |||||
| CVE-2024-41883 | 2024-12-24 | N/A | N/A | ||
| Team ENVY, a Security Research TEAM has found a flaw that allows for a remote code execution on the NVR . An attacker enters a special value for a specific URL parameter, resulting in a NULL pointer reference and a reboot of the NVR. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds. | |||||
| CVE-2021-47385 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] | |||||
| CVE-2021-47380 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase] | |||||
| CVE-2024-27025 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nbd: null check for nla_nest_start nla_nest_start() may fail and return NULL. Insert a check and set errno based on other call sites within the same source code. | |||||
| CVE-2024-27047 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: fix phy_get_internal_delay accessing an empty array The phy_get_internal_delay function could try to access to an empty array in the case that the driver is calling phy_get_internal_delay without defining delay_values and rx-internal-delay-ps or tx-internal-delay-ps is defined to 0 in the device-tree. This will lead to "unable to handle kernel NULL pointer dereference at virtual address 0". To avoid this kernel oops, the test should be delay >= 0. As there is already delay < 0 test just before, the test could only be size == 0. | |||||
| CVE-2024-27051 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-27048 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcm80211: handle pmk_op allocation failure The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. | |||||
| CVE-2024-27046 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again. | |||||
| CVE-2021-47290 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. | |||||
| CVE-2021-47289 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer. | |||||
| CVE-2024-27071 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The "im" pins are optional. Add missing check in the hx8357_probe(). | |||||
| CVE-2024-27060 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL pointer dereference in tb_port_update_credits() Olliver reported that his system crashes when plugging in Thunderbolt 1 device: BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits. | |||||
| CVE-2024-27044 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential NULL pointer dereferences in 'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) | |||||
| CVE-2024-27038 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: Fix clk_core_get NULL dereference It is possible for clk_core_get to dereference a NULL in the following sequence: clk_core_get() of_clk_get_hw_from_clkspec() __of_clk_get_hw_from_provider() __clk_get_hw() __clk_get_hw() can return NULL which is dereferenced by clk_core_get() at hw->core. Prior to commit dde4eff47c82 ("clk: Look for parents with clkdev based clk_lookups") the check IS_ERR_OR_NULL() was performed which would have caught the NULL. Reading the description of this function it talks about returning NULL but that cannot be so at the moment. Update the function to check for hw before dereferencing it and return NULL if hw is NULL. | |||||
| CVE-2023-52650 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: dsi: Add missing check for of_find_device_by_node Add check for the return value of of_find_device_by_node() and return the error if it fails in order to avoid NULL pointer dereference. | |||||
| CVE-2024-26975 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix a NULL pointer dereference A NULL pointer dereference is triggered when probing the MMIO RAPL driver on platforms with CPU ID not listed in intel_rapl_common CPU model list. This is because the intel_rapl_common module still probes on such platforms even if 'defaults_msr' is not set after commit 1488ac990ac8 ("powercap: intel_rapl: Allow probing without CPUID match"). Thus the MMIO RAPL rp->priv->defaults is NULL when registering to RAPL framework. Fix the problem by adding sanity check to ensure rp->priv->rapl_defaults is always valid. | |||||
| CVE-2024-26964 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Add error handling in xhci_map_urb_for_dma Currently xhci_map_urb_for_dma() creates a temporary buffer and copies the SG list to the new linear buffer. But if the kzalloc_node() fails, then the following sg_pcopy_to_buffer() can lead to crash since it tries to memcpy to NULL pointer. So return -ENOMEM if kzalloc returns null pointer. | |||||
| CVE-2024-26793 | 1 Linux | 1 Linux Kernel | 2024-12-20 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gtp: fix use-after-free and null-ptr-deref in gtp_newlink() The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map ---truncated--- | |||||