Total
6052 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50149 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't free job in TDR Freeing job in TDR is not safe as TDR can pass the run_job thread resulting in UAF. It is only safe for free job to naturally be called by the scheduler. Rather free job in TDR, add to pending list. (cherry picked from commit ea2f6a77d0c40d97f4a4dc93fee4afe15d94926d) | |||||
| CVE-2024-50114 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Unregister redistributor for failed vCPU creation Alex reports that syzkaller has managed to trigger a use-after-free when tearing down a VM: BUG: KASAN: slab-use-after-free in kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 Read of size 8 at addr ffffff801c6890d0 by task syz.3.2219/10758 CPU: 3 UID: 0 PID: 10758 Comm: syz.3.2219 Not tainted 6.11.0-rc6-dirty #64 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x17c/0x1a8 arch/arm64/kernel/stacktrace.c:317 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:324 __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x94/0xc0 lib/dump_stack.c:119 print_report+0x144/0x7a4 mm/kasan/report.c:377 kasan_report+0xcc/0x128 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 kvm_put_kvm+0x300/0xe68 virt/kvm/kvm_main.c:5769 kvm_vm_release+0x4c/0x60 virt/kvm/kvm_main.c:1409 __fput+0x198/0x71c fs/file_table.c:422 ____fput+0x20/0x30 fs/file_table.c:450 task_work_run+0x1cc/0x23c kernel/task_work.c:228 do_notify_resume+0x144/0x1a0 include/linux/resume_user_mode.h:50 el0_svc+0x64/0x68 arch/arm64/kernel/entry-common.c:169 el0t_64_sync_handler+0x90/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Upon closer inspection, it appears that we do not properly tear down the MMIO registration for a vCPU that fails creation late in the game, e.g. a vCPU w/ the same ID already exists in the VM. It is important to consider the context of commit that introduced this bug by moving the unregistration out of __kvm_vgic_vcpu_destroy(). That change correctly sought to avoid an srcu v. config_lock inversion by breaking up the vCPU teardown into two parts, one guarded by the config_lock. Fix the use-after-free while avoiding lock inversion by adding a special-cased unregistration to __kvm_vgic_vcpu_destroy(). This is safe because failed vCPUs are torn down outside of the config_lock. | |||||
| CVE-2024-50106 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix race between laundromat and free_stateid There is a race between laundromat handling of revoked delegations and a client sending free_stateid operation. Laundromat thread finds that delegation has expired and needs to be revoked so it marks the delegation stid revoked and it puts it on a reaper list but then it unlock the state lock and the actual delegation revocation happens without the lock. Once the stid is marked revoked a racing free_stateid processing thread does the following (1) it calls list_del_init() which removes it from the reaper list and (2) frees the delegation stid structure. The laundromat thread ends up not calling the revoke_delegation() function for this particular delegation but that means it will no release the lock lease that exists on the file. Now, a new open for this file comes in and ends up finding that lease list isn't empty and calls nfsd_breaker_owns_lease() which ends up trying to derefence a freed delegation stateid. Leading to the followint use-after-free KASAN warning: kernel: ================================================================== kernel: BUG: KASAN: slab-use-after-free in nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: Read of size 8 at addr ffff0000e73cd0c8 by task nfsd/6205 kernel: kernel: CPU: 2 UID: 0 PID: 6205 Comm: nfsd Kdump: loaded Not tainted 6.11.0-rc7+ #9 kernel: Hardware name: Apple Inc. Apple Virtualization Generic Platform, BIOS 2069.0.0.0.0 08/03/2024 kernel: Call trace: kernel: dump_backtrace+0x98/0x120 kernel: show_stack+0x1c/0x30 kernel: dump_stack_lvl+0x80/0xe8 kernel: print_address_description.constprop.0+0x84/0x390 kernel: print_report+0xa4/0x268 kernel: kasan_report+0xb4/0xf8 kernel: __asan_report_load8_noabort+0x1c/0x28 kernel: nfsd_breaker_owns_lease+0x140/0x160 [nfsd] kernel: nfsd_file_do_acquire+0xb3c/0x11d0 [nfsd] kernel: nfsd_file_acquire_opened+0x84/0x110 [nfsd] kernel: nfs4_get_vfs_file+0x634/0x958 [nfsd] kernel: nfsd4_process_open2+0xa40/0x1a40 [nfsd] kernel: nfsd4_open+0xa08/0xe80 [nfsd] kernel: nfsd4_proc_compound+0xb8c/0x2130 [nfsd] kernel: nfsd_dispatch+0x22c/0x718 [nfsd] kernel: svc_process_common+0x8e8/0x1960 [sunrpc] kernel: svc_process+0x3d4/0x7e0 [sunrpc] kernel: svc_handle_xprt+0x828/0xe10 [sunrpc] kernel: svc_recv+0x2cc/0x6a8 [sunrpc] kernel: nfsd+0x270/0x400 [nfsd] kernel: kthread+0x288/0x310 kernel: ret_from_fork+0x10/0x20 This patch proposes a fixed that's based on adding 2 new additional stid's sc_status values that help coordinate between the laundromat and other operations (nfsd4_free_stateid() and nfsd4_delegreturn()). First to make sure, that once the stid is marked revoked, it is not removed by the nfsd4_free_stateid(), the laundromat take a reference on the stateid. Then, coordinating whether the stid has been put on the cl_revoked list or we are processing FREE_STATEID and need to make sure to remove it from the list, each check that state and act accordingly. If laundromat has added to the cl_revoke list before the arrival of FREE_STATEID, then nfsd4_free_stateid() knows to remove it from the list. If nfsd4_free_stateid() finds that operations arrived before laundromat has placed it on cl_revoke list, it marks the state freed and then laundromat will no longer add it to the list. Also, for nfsd4_delegreturn() when looking for the specified stid, we need to access stid that are marked removed or freeable, it means the laundromat has started processing it but hasn't finished and this delegreturn needs to return nfserr_deleg_revoked and not nfserr_bad_stateid. The latter will not trigger a FREE_STATEID and the lack of it will leave this stid on the cl_revoked list indefinitely. | |||||
| CVE-2024-50084 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test() Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_de ---truncated--- | |||||
| CVE-2023-52510 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: Fix a potential UAF in ca8210_probe If of_clk_add_provider() fails in ca8210_register_ext_clock(), it calls clk_unregister() to release priv->clk and returns an error. However, the caller ca8210_probe() then calls ca8210_remove(), where priv->clk is freed again in ca8210_unregister_ext_clock(). In this case, a use-after-free may happen in the second time we call clk_unregister(). Fix this by removing the first clk_unregister(). Also, priv->clk could be an error code on failure of clk_register_fixed_rate(). Use IS_ERR_OR_NULL to catch this case in ca8210_unregister_ext_clock(). | |||||
| CVE-2023-52509 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ravb: Fix use-after-free issue in ravb_tx_timeout_work() The ravb_stop() should call cancel_work_sync(). Otherwise, ravb_tx_timeout_work() is possible to use the freed priv after ravb_remove() was called like below: CPU0 CPU1 ravb_tx_timeout() ravb_remove() unregister_netdev() free_netdev(ndev) // free priv ravb_tx_timeout_work() // use priv unregister_netdev() will call .ndo_stop() so that ravb_stop() is called. And, after phy_stop() is called, netif_carrier_off() is also called. So that .ndo_tx_timeout() will not be called after phy_stop(). | |||||
| CVE-2021-46958 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between transaction aborts and fsyncs leading to use-after-free There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it w ---truncated--- | |||||
| CVE-2024-10074 | 1 Openatom | 1 Openharmony | 2024-12-11 | N/A | 8.8 HIGH |
| in OpenHarmony v4.1.1 and prior versions allow a local attacker cause the common permission is upgraded to root through use after free. | |||||
| CVE-2023-52503 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix use-after-free vulnerability in amdtee_close_session There is a potential race condition in amdtee_close_session that may cause use-after-free in amdtee_open_session. For instance, if a session has refcount == 1, and one thread tries to free this session via: kref_put(&sess->refcount, destroy_session); the reference count will get decremented, and the next step would be to call destroy_session(). However, if in another thread, amdtee_open_session() is called before destroy_session() has completed execution, alloc_session() may return 'sess' that will be freed up later in destroy_session() leading to use-after-free in amdtee_open_session. To fix this issue, treat decrement of sess->refcount and removal of 'sess' from session list in destroy_session() as a critical section, so that it is executed atomically. | |||||
| CVE-2021-46959 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: Fix use-after-free with devm_spi_alloc_* We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98) [<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24) r4:b6700140 [<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40) [<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup. | |||||
| CVE-2021-47058 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed. | |||||
| CVE-2021-47061 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid. | |||||
| CVE-2021-47063 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block | |||||
| CVE-2024-52568 | 1 Siemens | 1 Tecnomatix Plant Simulation | 2024-12-10 | N/A | 7.8 HIGH |
| A vulnerability has been identified in Teamcenter Visualization V14.2 (All versions < V14.2.0.14), Teamcenter Visualization V14.3 (All versions < V14.3.0.12), Teamcenter Visualization V2312 (All versions < V2312.0008), Teamcenter Visualization V2406 (All versions < V2406.0005), Tecnomatix Plant Simulation V2302 (All versions < V2302.0018), Tecnomatix Plant Simulation V2404 (All versions < V2404.0007). The affected applications contain a use-after-free vulnerability that could be triggered while parsing specially crafted WRL files. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-24244) | |||||
| CVE-2021-47049 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Use after free in __vmbus_open() The "open_info" variable is added to the &vmbus_connection.chn_msg_list, but the error handling frees "open_info" without removing it from the list. This will result in a use after free. First remove it from the list, and then free it. | |||||
| CVE-2021-47048 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue. | |||||
| CVE-2023-52475 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e | |||||
| CVE-2021-47081 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory Our code analyzer reported a uaf. In gaudi_memset_device_memory, cb is get via hl_cb_kernel_create() with 2 refcount. If hl_cs_allocate_job() failed, the execution runs into release_cb branch. One ref of cb is dropped by hl_cb_put(cb) and could be freed if other thread also drops one ref. Then cb is used by cb->id later, which is a potential uaf. My patch add a variable 'id' to accept the value of cb->id before the hl_cb_put(cb) is called, to avoid the potential uaf. | |||||
| CVE-2021-47012 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix a use after free in siw_alloc_mr Our code analyzer reported a UAF. In siw_alloc_mr(), it calls siw_mr_add_mem(mr,..). In the implementation of siw_mr_add_mem(), mem is assigned to mr->mem and then mem is freed via kfree(mem) if xa_alloc_cyclic() failed. Here, mr->mem still point to a freed object. After, the execution continue up to the err_out branch of siw_alloc_mr, and the freed mr->mem is used in siw_mr_drop_mem(mr). My patch moves "mr->mem = mem" behind the if (xa_alloc_cyclic(..)<0) {} section, to avoid the uaf. | |||||
| CVE-2021-47017 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix a use after free in ath10k_htc_send_bundle In ath10k_htc_send_bundle, the bundle_skb could be freed by dev_kfree_skb_any(bundle_skb). But the bundle_skb is used later by bundle_skb->len. As skb_len = bundle_skb->len, my patch replaces bundle_skb->len to skb_len after the bundle_skb was freed. | |||||