Total
1173 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49619 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: sfp: fix memory leak in sfp_probe() sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). | |||||
| CVE-2022-49583 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix handling of dummy receive descriptors Fix memory leak caused by not handling dummy receive descriptor properly. iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive descriptors. Without this patch, when the hardware writes a dummy descriptor, iavf would not free the page allocated for the previous receive buffer. This is an unlikely event but can still happen. [Jesse: massaged commit message] | |||||
| CVE-2022-49566 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix memory leak in RSA When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is used, some components of the private key persist even after the TFM is released. Replace the explicit calls to free the buffers in qat_rsa_exit_tfm() with a call to qat_rsa_clear_ctx() which frees all buffers referenced in the TFM context. | |||||
| CVE-2022-49549 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails In mce_threshold_create_device(), if threshold_create_bank() fails, the previously allocated threshold banks array @bp will be leaked because the call to mce_threshold_remove_device() will not free it. This happens because mce_threshold_remove_device() fetches the pointer through the threshold_banks per-CPU variable but bp is written there only after the bank creation is successful, and not before, when threshold_create_bank() fails. Add a helper which unwinds all the bank creation work previously done and pass into it the previously allocated threshold banks array for freeing. [ bp: Massage. ] | |||||
| CVE-2022-49534 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT There is a potential memory leak in lpfc_ignore_els_cmpl() and lpfc_els_rsp_reject() that was allocated from NPIV PLOGI_RJT (lpfc_rcv_plogi()'s login_mbox). Check if cmdiocb->context_un.mbox was allocated in lpfc_ignore_els_cmpl(), and then free it back to phba->mbox_mem_pool along with mbox->ctx_buf for service parameters. For lpfc_els_rsp_reject() failure, free both the ctx_buf for service parameters and the login_mbox. | |||||
| CVE-2022-49502 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: rga: fix possible memory leak in rga_probe rga->m2m_dev needs to be freed when rga_probe fails. | |||||
| CVE-2022-49468 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thermal/core: Fix memory leak in __thermal_cooling_device_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888010080000 (size 264312): comm "182", pid 102533, jiffies 4296434960 (age 10.100s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 40 7f 1f b9 ff ff ff ff ........@....... backtrace: [<0000000038b2f4fc>] kmalloc_order_trace+0x1d/0x110 mm/slab_common.c:969 [<00000000ebcb8da5>] __kmalloc+0x373/0x420 include/linux/slab.h:510 [<0000000084137f13>] thermal_cooling_device_setup_sysfs+0x15d/0x2d0 include/linux/slab.h:586 [<00000000352b8755>] __thermal_cooling_device_register+0x332/0xa60 drivers/thermal/thermal_core.c:927 [<00000000fb9f331b>] devm_thermal_of_cooling_device_register+0x6b/0xf0 drivers/thermal/thermal_core.c:1041 [<000000009b8012d2>] max6650_probe.cold+0x557/0x6aa drivers/hwmon/max6650.c:211 [<00000000da0b7e04>] i2c_device_probe+0x472/0xac0 drivers/i2c/i2c-core-base.c:561 If device_register() fails, thermal_cooling_device_destroy_sysfs() need be called to free the memory allocated in thermal_cooling_device_setup_sysfs(). | |||||
| CVE-2022-49467 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm: msm: fix possible memory leak in mdp5_crtc_cursor_set() drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo needs to be put when msm_gem_get_and_pin_iova fails. | |||||
| CVE-2022-49461 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: amt: fix memory leak for advertisement message When a gateway receives an advertisement message, it extracts relay information and then it should be freed. But the advertisement handler doesn't free it. So, memory leak would occur. | |||||
| CVE-2022-49403 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: lib/string_helpers: fix not adding strarray to device's resource list Add allocated strarray to device's resource list. This is a must to automatically release strarray when the device disappears. Without this fix we have a memory leak in the few drivers which use devm_kasprintf_strarray(). | |||||
| CVE-2022-49381 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_fill_super If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff859c45e5>] kmem_cache_alloc_trace+0x475/0x8a0 [<ffffffff86160146>] jffs2_sum_init+0x96/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffff858579ba>] kmalloc_order+0xda/0x110 [<ffffffff85857a11>] kmalloc_order_trace+0x21/0x130 [<ffffffff859c2ed1>] __kmalloc+0x711/0x8a0 [<ffffffff86160189>] jffs2_sum_init+0xd9/0x1a0 [<ffffffff86140e25>] jffs2_do_mount_fs+0x745/0x2120 [<ffffffff86149fec>] jffs2_do_fill_super+0x35c/0x810 [<ffffffff8614aae9>] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. | |||||
| CVE-2022-49370 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by calling kobject_put(). | |||||
| CVE-2022-49369 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: amt: fix possible memory leak in amt_rcv() If an amt receives packets and it finds socket. If it can't find a socket, it should free a received skb. But it doesn't. So, a memory leak would possibly occur. | |||||
| CVE-2022-49358 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: memleak flow rule from commit path Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction. | |||||
| CVE-2022-49334 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: Fix xarray node memory leak If xas_split_alloc() fails to allocate the necessary nodes to complete the xarray entry split, it sets the xa_state to -ENOMEM, which xas_nomem() then interprets as "Please allocate more memory", not as "Please free any unnecessary memory" (which was the intended outcome). It's confusing to use xas_nomem() to free memory in this context, so call xas_destroy() instead. | |||||
| CVE-2022-49331 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths. | |||||
| CVE-2022-49312 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix a potential memory leak in r871xu_drv_init() In r871xu_drv_init(), if r8712_init_drv_sw() fails, then the memory allocated by r8712_alloc_io_queue() in r8712_usb_dvobj_init() is not properly released as there is no action will be performed by r8712_usb_dvobj_deinit(). To properly release it, we should call r8712_free_io_queue() in r8712_usb_dvobj_deinit(). Besides, in r871xu_dev_remove(), r8712_usb_dvobj_deinit() will be called by r871x_dev_unload() under condition `padapter->bup` and r8712_free_io_queue() is called by r8712_free_drv_sw(). However, r8712_usb_dvobj_deinit() does not rely on `padapter->bup` and calling r8712_free_io_queue() in r8712_free_drv_sw() is negative for better understading the code. So I move r8712_usb_dvobj_deinit() into r871xu_dev_remove(), and remove r8712_free_io_queue() from r8712_free_drv_sw(). | |||||
| CVE-2022-49284 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: coresight: syscfg: Fix memleak on registration failure in cscfg_create_device device_register() calls device_initialize(), according to doc of device_initialize: Use put_device() to give up your reference instead of freeing * @dev directly once you have called this function. To prevent potential memleak, use put_device() for error handling. | |||||
| CVE-2022-49277 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_do_mount_fs If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] unreferenced object 0xffff88812c760000 (size 65536): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffffa493a449>] __kmalloc+0x6b9/0x910 [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. | |||||
| CVE-2022-49276 | 1 Linux | 1 Linux Kernel | 2025-10-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: fix memory leak in jffs2_scan_medium If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis) | |||||