Export limit exceeded: 24706 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24706 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52700 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel warning when sending SYN message When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad905e5a ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data. | ||||
| CVE-2024-3689 | 1 Zoneland | 1 O2oa | 2025-09-19 | 3.7 Low |
| A vulnerability classified as problematic has been found in Zhejiang Land Zongheng Network Technology O2OA up to 20240403. Affected is an unknown function of the file /x_portal_assemble_surface/jaxrs/portal/list?v=8.2.3-4-43f4fe3. The manipulation leads to information disclosure. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. VDB-260478 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2024-25011 | 1 Ericsson | 2 Catalog Manager, Order Care | 2025-09-19 | 5.3 Medium |
| Ericsson Catalog Manager and Ericsson Order Care APIs do not have authentication enabled by default. Authentication checks can be configured to remediate the information disclosure issue. | ||||
| CVE-2025-10607 | 1 Portabilis | 1 I-educar | 2025-09-18 | 4.3 Medium |
| A security vulnerability has been detected in Portabilis i-Educar up to 2.10. Impacted is an unknown function of the file /module/Avaliacao/diarioApi. Such manipulation leads to information disclosure. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2025-59350 | 2 Dragonflyoss, Linuxfoundation | 2 Dragonfly2, Dragonfly | 2025-09-18 | 5.3 Medium |
| Dragonfly is an open source P2P-based file distribution and image acceleration system. Prior to 2.1.0, the access control mechanism for the Proxy feature uses simple string comparisons and is therefore vulnerable to timing attacks. An attacker may try to guess the password one character at a time by sending all possible characters to a vulnerable mechanism and measuring the comparison instruction’s execution times. This vulnerability is fixed in 2.1.0. | ||||
| CVE-2025-59352 | 2 Dragonflyoss, Linuxfoundation | 2 Dragonfly2, Dragonfly | 2025-09-18 | 9.8 Critical |
| Dragonfly is an open source P2P-based file distribution and image acceleration system. Prior to 2.1.0, the gRPC API and HTTP APIs allow peers to send requests that force the recipient peer to create files in arbitrary file system locations, and to read arbitrary files. This allows peers to steal other peers’ secret data and to gain remote code execution (RCE) capabilities on the peer’s machine.This vulnerability is fixed in 2.1.0. | ||||
| CVE-2024-45336 | 1 Redhat | 8 Acm, Ceph Storage, Enterprise Linux and 5 more | 2025-09-18 | 6.1 Medium |
| The HTTP client drops sensitive headers after following a cross-domain redirect. For example, a request to a.com/ containing an Authorization header which is redirected to b.com/ will not send that header to b.com. In the event that the client received a subsequent same-domain redirect, however, the sensitive headers would be restored. For example, a chain of redirects from a.com/, to b.com/1, and finally to b.com/2 would incorrectly send the Authorization header to b.com/2. | ||||
| CVE-2024-27356 | 3 Gl-i, Gl-inet, Gl.inet | 58 X1200, 0300, A1300 and 55 more | 2025-09-18 | 7.5 High |
| An issue was discovered on certain GL-iNet devices. Attackers can download files such as logs via commands, potentially obtaining critical user information. This affects MT6000 4.5.5, XE3000 4.4.4, X3000 4.4.5, MT3000 4.5.0, MT2500 4.5.0, AXT1800 4.5.0, AX1800 4.5.0, A1300 4.5.0, S200 4.1.4-0300, X750 4.3.7, SFT1200 4.3.7, XE300 4.3.7, MT1300 4.3.10, AR750 4.3.10, AR750S 4.3.10, AR300M 4.3.10, AR300M16 4.3.10, B1300 4.3.10, MT300N-v2 4.3.10, X300B 3.217, S1300 3.216, SF1200 3.216, MV1000 3.216, N300 3.216, B2200 3.216, and X1200 3.203. | ||||
| CVE-2024-24720 | 1 Innovaphone | 1 Innovaphone Pbx | 2025-09-18 | 5.3 Medium |
| An issue was discovered in the Forgot password function in Innovaphone PBX before 14r1 devices. It provides information about whether a user exists on a system. | ||||
| CVE-2024-27456 | 1 Rylabs | 1 Rack Cors Middleware | 2025-09-18 | 9.1 Critical |
| rack-cors (aka Rack CORS Middleware) 2.0.1 has 0666 permissions for the .rb files. | ||||
| CVE-2021-47558 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Disable Tx queues when reconfiguring the interface The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]--- | ||||
| CVE-2024-36895 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: use correct buffer size when parsing configfs lists This commit fixes uvc gadget support on 32-bit platforms. Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for reuse") introduced a helper function __uvcg_iter_item_entries() to aid with parsing lists of items on configfs attributes stores. This function is a generalization of another very similar function, which used a stack-allocated temporary buffer of fixed size for each item in the list and used the sizeof() operator to check for potential buffer overruns. The new function was changed to allocate the now variably sized temp buffer on heap, but wasn't properly updated to also check for max buffer size using the computed size instead of sizeof() operator. As a result, the maximum item size was 7 (plus null terminator) on 64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just barely enough, 3 is definitely too small for some of UVC configfs attributes. For example, dwFrameInteval, specified in 100ns units, usually has 6-digit item values, e.g. 166666 for 60fps. | ||||
| CVE-2024-36887 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: e1000e: change usleep_range to udelay in PHY mdic access This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems"). The referenced commit used usleep_range inside the PHY access routines, which are sometimes called from an atomic context. This can lead to a kernel panic in some scenarios, such as cable disconnection and reconnection on vPro systems. Solve this by changing the usleep_range calls back to udelay. | ||||
| CVE-2024-36033 | 1 Linux | 1 Linux Kernel | 2025-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching board id Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. | ||||
| CVE-2025-54123 | 2 Hoverfly, Spectolabs | 2 Hoverfly, Hoverfly | 2025-09-17 | 9.8 Critical |
| Hoverfly is an open source API simulation tool. In versions 1.11.3 and prior, the middleware functionality in Hoverfly is vulnerable to command injection vulnerability at `/api/v2/hoverfly/middleware` endpoint due to insufficient validation and sanitization in user input. The vulnerability exists in the middleware management API endpoint `/api/v2/hoverfly/middleware`. This issue is born due to combination of three code level flaws: Insufficient Input Validation in middleware.go line 94-96; Unsafe Command Execution in local_middleware.go line 14-19; and Immediate Execution During Testing in hoverfly_service.go line 173. This allows an attacker to gain remote code execution (RCE) on any system running the vulnerable Hoverfly service. Since the input is directly passed to system commands without proper checks, an attacker can upload a malicious payload or directly execute arbitrary commands (including reverse shells) on the host server with the privileges of the Hoverfly process. Commit 17e60a9bc78826deb4b782dca1c1abd3dbe60d40 in version 1.12.0 disables the set middleware API by default, and subsequent changes to documentation make users aware of the security changes of exposing the set middleware API. | ||||
| CVE-2024-38566 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix verifier assumptions about socket->sk The verifier assumes that 'sk' field in 'struct socket' is valid and non-NULL when 'socket' pointer itself is trusted and non-NULL. That may not be the case when socket was just created and passed to LSM socket_accept hook. Fix this verifier assumption and adjust tests. | ||||
| CVE-2025-56404 | 1 Mariadb | 3 Mariadb, Mcp, Model Context Protocol | 2025-09-17 | 7.5 High |
| An issue was discovered in MariaDB MCP 0.1.0 allowing attackers to gain sensitive information via the SSE service as the SSE service lacks user validation. | ||||
| CVE-2024-34777 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-mapping: benchmark: fix node id validation While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). | ||||
| CVE-2025-58751 | 1 Vitejs | 1 Vite | 2025-09-17 | 5.3 Medium |
| Vite is a frontend tooling framework for JavaScript. Prior to versions 7.1.5, 7.0.7, 6.3.6, and 5.4.20, files starting with the same name with the public directory were served bypassing the `server.fs` settings. Only apps that explicitly expose the Vite dev server to the network (using --host or `server.host` config option), use the public directory feature (enabled by default), and have a symlink in the public directory are affected. Versions 7.1.5, 7.0.7, 6.3.6, and 5.4.20 fix the issue. | ||||
| CVE-2025-58752 | 1 Vitejs | 1 Vite | 2025-09-17 | 5.3 Medium |
| Vite is a frontend tooling framework for JavaScript. Prior to versions 7.1.5, 7.0.7, 6.3.6, and 5.4.20, any HTML files on the machine were served regardless of the `server.fs` settings. Only apps that explicitly expose the Vite dev server to the network (using --host or server.host config option) and use `appType: 'spa'` (default) or `appType: 'mpa'` are affected. This vulnerability also affects the preview server. The preview server allowed HTML files not under the output directory to be served. Versions 7.1.5, 7.0.7, 6.3.6, and 5.4.20 fix the issue. | ||||