| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| tar-rs is a tar archive reading/writing library for Rust. In versions 0.4.44 and below, when unpacking a tar archive, the tar crate's unpack_dir function uses fs::metadata() to check whether a path that already exists is a directory. Because fs::metadata() follows symbolic links, a crafted tarball containing a symlink entry followed by a directory entry with the same name causes the crate to treat the symlink target as a valid existing directory — and subsequently apply chmod to it. This allows an attacker to modify the permissions of arbitrary directories outside the extraction root. This issue has been fixed in version 0.4.45. |
| Deserialization of Untrusted Data vulnerability in Apache Seata (incubating).
This security vulnerability is the same as CVE-2024-47552, but the version range described in the CVE-2024-47552 definition is too narrow.
This issue affects Apache Seata (incubating): from 2.0.0 before 2.3.0.
Users are recommended to upgrade to version 2.3.0, which fixes the issue. |
| Deserialization of Untrusted Data vulnerability in Apache Seata (incubating).
This issue affects Apache Seata (incubating): from 2.0.0 before 2.2.0.
Users are recommended to upgrade to version 2.2.0, which fixes the issue. |
| A vulnerability has been found in erupts erupt up to 1.13.3. Affected by this issue is the function geneEruptHqlOrderBy of the file erupt-data/erupt-jpa/src/main/java/xyz/erupt/jpa/dao/EruptJpaUtils.java. Such manipulation of the argument sort.field leads to sql injection hibernate. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in erupts erupt bis 1.13.3. Affected by this vulnerability is the function EruptDataQuery of the file erupt-ai/src/main/java/xyz/erupt/ai/call/impl/EruptDataQuery.java of the component MCP Tool Interface. This manipulation causes sql injection hibernate. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| An attacker can extract user email addresses (PII) exposed in base64 encoding via the state parameter in the OAuth callback URL. |
| Deserialization of Untrusted Data vulnerability in DTStack chunjun (chunjun-core/src/main/java/com/dtstack/chunjun/util modules). This vulnerability is associated with program files GsonUtil.Java.
This issue affects chunjun: before 1.16.1. |
| Trivy is a security scanner. On March 19, 2026, a threat actor used compromised credentials to publish a malicious Trivy v0.69.4 release, force-push 76 of 77 version tags in `aquasecurity/trivy-action` to credential-stealing malware, and replace all 7 tags in `aquasecurity/setup-trivy` with malicious commits. This incident is a continuation of the supply chain attack that began in late February 2026. Following the initial disclosure on March 1, credential rotation was performed but was not atomic (not all credentials were revoked simultaneously). The attacker could have use a valid token to exfiltrate newly rotated secrets during the rotation window (which lasted a few days). This could have allowed the attacker to retain access and execute the March 19 attack. Affected components include the `aquasecurity/trivy` Go / Container image version 0.69.4, the `aquasecurity/trivy-action` GitHub Action versions 0.0.1 – 0.34.2 (76/77), and the`aquasecurity/setup-trivy` GitHub Action versions 0.2.0 – 0.2.6, prior to the recreation of 0.2.6 with a safe commit. Known safe versions include versions 0.69.2 and 0.69.3 of the Trivy binary, version 0.35.0 of trivy-action, and version 0.2.6 of setup-trivy. Additionally, take other mitigations to ensure the safety of secrets. If there is any possibility that a compromised version ran in one's environment, all secrets accessible to affected pipelines must be treated as exposed and rotated immediately. Check whether one's organization pulled or executed Trivy v0.69.4 from any source. Remove any affected artifacts immediately. Review all workflows using `aquasecurity/trivy-action` or `aquasecurity/setup-trivy`. Those who referenced a version tag rather than a full commit SHA should check workflow run logs from March 19–20, 2026 for signs of compromise. Look for repositories named `tpcp-docs` in one's GitHub organization. The presence of such a repository may indicate that the fallback exfiltration mechanism was triggered and secrets were successfully stolen. Pin GitHub Actions to full, immutable commit SHA hashes, don't use mutable version tags. |
| OpenClaw before 2026.3.7 contains an improper header validation vulnerability in fetchWithSsrFGuard that forwards custom authorization headers across cross-origin redirects. Attackers can trigger redirects to different origins to intercept sensitive headers like X-Api-Key and Private-Token intended for the original destination. |
| Exposure of session signing secret in Checkmk <2.4.0p23, <2.3.0p45 and 2.2.0 allows an administrator of a remote site with config sync enabled to hijack sessions on the central site by forging session cookies. |
| IncusOS is an immutable OS image dedicated to running Incus. Prior to 202603142010, the default configuration of systemd-cryptenroll as used by IncusOS through mkosi allows for an attacker with physical access to the machine to access the encrypted data without requiring any interaction by the system's owner or any tampering of Secure Boot state or kernel (UKI) boot image. That's because in this configuration, the LUKS key is made available by the TPM so long as the system has the expected PCR7 value and the PCR11 policy matches. That default PCR11 policy importantly allows for the TPM to release the key to the booted system rather than just from the initrd part of the signed kernel image (UKI). The attack relies on the attacker being able to substitute the original encrypted root partition for one that they control. By doing so, the system will prompt for a recovery key on boot, which the attacker has defined and can provide, before booting the system using the attacker's root partition rather than the system's original one. The attacker only needs to put a systemd unit starting on system boot within their root partition to have the system run that logic on boot. That unit will then run in an environment where the TPM will allow for the retrieval of the encryption key of the real root disk, allowing the attacker to steal the LUKS volume key (immutable master key) and then use it against the real root disk, altering it or getting data out before putting the disk back the way it was and returning the system without a trace of this attack having happened. This is all possible because the system will have still booted with Secure Boot enabled, will have measured and ran the expected bootloader and kernel image (UKI). The initrd selects the root disk based on GPT partition identifiers making it possible to easily substitute the real root disk for an attacker controlled one. This doesn't lead to any change in the TPM state and therefore allows for retrieval of the LUKS key by the attacker through a boot time systemd unit on their alternative root partition. IncusOS version 202603142010 (2026/03/14 20:10 UTC) includes the new PCR15 logic and will automatically update the TPM policy on boot. Anyone suspecting that their system may have been physically accessed while shut down should perform a full system wipe and reinstallation as only that will rotate the LUKS volume key and prevent subsequent access to the encrypted data should the system have been previously compromised. There are no known workarounds other than updating to a version with corrected logic which will automatically rebind the LUKS keys to the new set of TPM registers and prevent this from being exploited. |
| Deserialization of Untrusted Data vulnerability in Shinetheme Traveler allows Object Injection.This issue affects Traveler: from n/a before 3.2.8.1. |
| Jenkins 2.554 and earlier, LTS 2.541.2 and earlier does not safely handle symbolic links during the extraction of .tar and .tar.gz archives, allowing crafted archives to write files to arbitrary locations on the filesystem, restricted only by file system access permissions of the user running Jenkins.
This can be exploited to deploy malicious scripts or plugins on the controller by attackers with Item/Configure permission, or able to control agent processes. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, in Central Browser mode, the `/api/4/serverslist` endpoint returns raw server objects from `GlancesServersList.get_servers_list()`. Those objects are mutated in-place during background polling and can contain a `uri` field with embedded HTTP Basic credentials for downstream Glances servers, using the reusable pbkdf2-derived Glances authentication secret. If the front Glances Browser/API instance is started without `--password`, which is supported and common for internal network deployments, `/api/4/serverslist` is completely unauthenticated. Any network user who can reach the Browser API can retrieve reusable credentials for protected downstream Glances servers once they have been polled by the browser instance. Version 4.5.2 fixes the issue. |
| Glances is an open-source system cross-platform monitoring tool. Prior to version 4.5.2, in Central Browser mode, Glances stores both the Zeroconf-advertised server name and the discovered IP address for dynamic servers, but later builds connection URIs from the untrusted advertised name instead of the discovered IP. When a dynamic server reports itself as protected, Glances also uses that same untrusted name as the lookup key for saved passwords and the global `[passwords] default` credential. An attacker on the same local network can advertise a fake Glances service over Zeroconf and cause the browser to automatically send a reusable Glances authentication secret to an attacker-controlled host. This affects the background polling path and the REST/WebUI click-through path in Central Browser mode. Version 4.5.2 fixes the issue. |
| IBM Planning Analytics Local 2.1.0 through 2.1.17 could allow an attacker to trick the caching mechanism into storing and serving sensitive, user-specific responses as publicly cacheable resources. |
| OpenClaw versions prior to 2026.3.2 contain a path-confinement bypass vulnerability in browser output handling that allows writes outside intended root directories. Attackers can exploit insufficient canonical path-boundary validation in file write operations to escape root-bound restrictions and write files to arbitrary locations. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a library-level vulnerability was identified in the Authlib Python library concerning the validation of OpenID Connect (OIDC) ID Tokens. Specifically, the internal hash verification logic (_verify_hash) responsible for validating the at_hash (Access Token Hash) and c_hash (Authorization Code Hash) claims exhibits a fail-open behavior when encountering an unsupported or unknown cryptographic algorithm. This flaw allows an attacker to bypass mandatory integrity protections by supplying a forged ID Token with a deliberately unrecognized alg header parameter. The library intercepts the unsupported state and silently returns True (validation passed), inherently violating fundamental cryptographic design principles and direct OIDC specifications. This issue has been patched in version 1.6.9. |
| The extension fails to properly define allowed classes used when deserializing transport failure metadata. An attacker may exploit this to execute untrusted serialized code. Note that an active exploit requires write access to the directory configured at $GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_spool_filepath']. |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to version 6.9.1, the GraphQL mutations "IndividualDeletionDeleteMutation" is intended to allow users to delete individual entity objects respectively. However, it was observed that this mutation can be misused to delete unrelated and sensitive objects such as analyses reports etc. This behavior stems from the lack of validation in the API to ensure that the targeted object is contextually related to the mutation being executed. Version 6.9.1 fixes the issue. |
