| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Race condition, use-after-free in the Graphics: WebRender component. This vulnerability affects Firefox < 149, Firefox ESR < 115.34, and Firefox ESR < 140.9. |
| The JetFormBuilder plugin for WordPress is vulnerable to arbitrary file read via path traversal in all versions up to, and including, 3.5.6.2. This is due to the 'Uploaded_File::set_from_array' method accepting user-supplied file paths from the Media Field preset JSON payload without validating that the path belongs to the WordPress uploads directory. Combined with an insufficient same-file check in 'File_Tools::is_same_file' that only compares basenames, this makes it possible for unauthenticated attackers to exfiltrate arbitrary local files as email attachments by submitting a crafted form request when the form is configured with a Media Field and a Send Email action with file attachment. |
| A race condition was found in the QXL driver in the Linux kernel. The qxl_mode_dumb_create() function dereferences the qobj returned by the qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. This flaw allows an attacker to guess the returned handle value and trigger a use-after-free issue, potentially leading to a denial of service or privilege escalation. |
| OpenClaw versions prior to 2026.2.26 contain an approval bypass vulnerability in system.run execution that allows attackers to execute commands from unintended filesystem locations by rebinding writable parent symlinks in the current working directory after approval. An attacker can modify mutable parent symlink path components between approval and execution time to redirect command execution to a different location while preserving the visible working directory string. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| The Intel EPT paging code uses an optimization to defer flushing of any cached
EPT state until the p2m lock is dropped, so that multiple modifications done
under the same locked region only issue a single flush.
Freeing of paging structures however is not deferred until the flushing is
done, and can result in freed pages transiently being present in cached state.
Such stale entries can point to memory ranges not owned by the guest, thus
allowing access to unintended memory regions. |
| Divide by zero in Microsoft Graphics Component allows an unauthorized attacker to deny service locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Kerberos allows an unauthorized attacker to bypass a security feature over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Bluetooth RFCOM Protocol Driver allows an authorized attacker to elevate privileges locally. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Graphics Component allows an authorized attacker to elevate privileges locally. |
| OpenClaw versions prior to 2026.2.25 contain a time-of-check-time-of-use vulnerability in approval-bound system.run execution where the cwd parameter is validated at approval time but resolved at execution time. Attackers can retarget a symlinked cwd between approval and execution to bypass command execution restrictions and execute arbitrary commands on node hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Check for NOT_READY flag state after locking
Currently the check for NOT_READY flag is performed before obtaining the
necessary lock. This opens a possibility for race condition when the flow
is concurrently removed from unready_flows list by the workqueue task,
which causes a double-removal from the list and a crash[0]. Fix the issue
by moving the flag check inside the section protected by
uplink_priv->unready_flows_lock mutex.
[0]:
[44376.389654] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP
[44376.391665] CPU: 7 PID: 59123 Comm: tc Not tainted 6.4.0-rc4+ #1
[44376.392984] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[44376.395342] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core]
[44376.396857] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06
[44376.399167] RSP: 0018:ffff88812cc97570 EFLAGS: 00010246
[44376.399680] RAX: dead000000000122 RBX: ffff8881088e3800 RCX: ffff8881881bac00
[44376.400337] RDX: dead000000000100 RSI: ffff88812cc97500 RDI: ffff8881242f71b0
[44376.401001] RBP: ffff88811cbb0940 R08: 0000000000000400 R09: 0000000000000001
[44376.401663] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88812c944000
[44376.402342] R13: ffff8881242f71a8 R14: ffff8881222b4000 R15: 0000000000000000
[44376.402999] FS: 00007f0451104800(0000) GS:ffff88852cb80000(0000) knlGS:0000000000000000
[44376.403787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[44376.404343] CR2: 0000000000489108 CR3: 0000000123a79003 CR4: 0000000000370ea0
[44376.405004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[44376.405665] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[44376.406339] Call Trace:
[44376.406651] <TASK>
[44376.406939] ? die_addr+0x33/0x90
[44376.407311] ? exc_general_protection+0x192/0x390
[44376.407795] ? asm_exc_general_protection+0x22/0x30
[44376.408292] ? mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core]
[44376.408876] __mlx5e_tc_del_fdb_peer_flow+0xbc/0xe0 [mlx5_core]
[44376.409482] mlx5e_tc_del_flow+0x42/0x210 [mlx5_core]
[44376.410055] mlx5e_flow_put+0x25/0x50 [mlx5_core]
[44376.410529] mlx5e_delete_flower+0x24b/0x350 [mlx5_core]
[44376.411043] tc_setup_cb_reoffload+0x22/0x80
[44376.411462] fl_reoffload+0x261/0x2f0 [cls_flower]
[44376.411907] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core]
[44376.412481] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core]
[44376.413044] tcf_block_playback_offloads+0x76/0x170
[44376.413497] tcf_block_unbind+0x7b/0xd0
[44376.413881] tcf_block_setup+0x17d/0x1c0
[44376.414269] tcf_block_offload_cmd.isra.0+0xf1/0x130
[44376.414725] tcf_block_offload_unbind+0x43/0x70
[44376.415153] __tcf_block_put+0x82/0x150
[44376.415532] ingress_destroy+0x22/0x30 [sch_ingress]
[44376.415986] qdisc_destroy+0x3b/0xd0
[44376.416343] qdisc_graft+0x4d0/0x620
[44376.416706] tc_get_qdisc+0x1c9/0x3b0
[44376.417074] rtnetlink_rcv_msg+0x29c/0x390
[44376.419978] ? rep_movs_alternative+0x3a/0xa0
[44376.420399] ? rtnl_calcit.isra.0+0x120/0x120
[44376.420813] netlink_rcv_skb+0x54/0x100
[44376.421192] netlink_unicast+0x1f6/0x2c0
[44376.421573] netlink_sendmsg+0x232/0x4a0
[44376.421980] sock_sendmsg+0x38/0x60
[44376.422328] ____sys_sendmsg+0x1d0/0x1e0
[44376.422709] ? copy_msghdr_from_user+0x6d/0xa0
[44376.423127] ___sys_sendmsg+0x80/0xc0
[44376.423495] ? ___sys_recvmsg+0x8b/0xc0
[44376.423869] __sys_sendmsg+0x51/0x90
[44376.424226] do_syscall_64+0x3d/0x90
[44376.424587] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[44376.425046] RIP: 0033:0x7f045134f887
[44376.425403] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00
---truncated--- |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Division by zero due to the RSASetPublic/KEYUTIL parsing path in ext/rsa.js and the BigInteger.modPowInt reduction logic in ext/jsbn.js. An attacker can force RSA public-key operations (e.g., verify and encryption) to collapse to deterministic zero outputs and hide “invalid key” errors by supplying a JWK whose modulus decodes to zero. |
| Intego Log Reporter, a macOS diagnostic utility bundled with Intego security products that collects system and application logs for support analysis, contains a local privilege escalation vulnerability. A root-executed diagnostic script creates and writes files in /tmp without enforcing secure directory handling, introducing a time-of-check to time-of-use (TOCTOU) race condition. A local unprivileged user can exploit a symlink-based race condition to cause arbitrary file writes to privileged system locations, resulting in privilege escalation to root. |
| Effect is a TypeScript framework that consists of several packages that work together to help build TypeScript applications. Prior to version 3.20.0, when using `RpcServer.toWebHandler` (or `HttpApp.toWebHandlerRuntime`) inside a Next.js App Router route handler, any Node.js `AsyncLocalStorage`-dependent API called from within an Effect fiber can read another concurrent request's context — or no context at all. Under production traffic, `auth()` from `@clerk/nextjs/server` returns a different user's session. Version 3.20.0 contains a fix for the issue. |
