| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not strictly require dirty metadata threshold for metadata writepages
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "f2fs: block cache/dio write during f2fs_enable_checkpoint()"
This reverts commit 196c81fdd438f7ac429d5639090a9816abb9760a.
Original patch may cause below deadlock, revert it.
write remount
- write_begin
- lock_page --- lock A
- prepare_write_begin
- f2fs_map_lock
- f2fs_enable_checkpoint
- down_write(cp_enable_rwsem) --- lock B
- sync_inode_sb
- writepages
- lock_page --- lock A
- down_read(cp_enable_rwsem) --- lock A |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dead lock while flushing management frames
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 |
| In the Linux kernel, the following vulnerability has been resolved:
romfs: check sb_set_blocksize() return value
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0. |
| Products.isurlinportal is a replacement for isURLInPortal method in Plone. Prior to versions 2.1.0, 3.1.0, and 4.0.0, a url /login?came_from=////evil.example may redirect to an external website after login. This issue has been patched in versions 2.1.0, 3.1.0, and 4.0.0. |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Prior to 0.4.0, the DELETE /studiocms_api/dashboard/api-tokens endpoint allows any authenticated user with editor privileges or above to revoke API tokens belonging to any other user, including admin and owner accounts. The handler accepts tokenID and userID directly from the request payload without verifying token ownership, caller identity, or role hierarchy. This enables targeted denial of service against critical integrations and automations. This vulnerability is fixed in 0.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Prior to 0.4.0, the /studiocms_api/dashboard/api-tokens endpoint allows any authenticated user (at least Editor) to generate API tokens for any other user, including owner and admin accounts. The endpoint fails to validate whether the requesting user is authorized to create tokens on behalf of the target user ID, resulting in a full privilege escalation. This vulnerability is fixed in 0.4.0. |
| The gst_riff_create_audio_caps function in gst-libs/gst/riff/riff-media.c in gst-plugins-base in GStreamer before 1.10.3 does not properly limit recursion, which allows remote attackers to cause a denial of service (stack overflow and crash) via vectors involving nested WAVEFORMATEX. |
| The vmnc decoder in the gstreamer does not initialize the render canvas, which allows remote attackers to obtain sensitive information as demonstrated by thumbnailing a simple 1 frame vmnc movie that does not draw to the allocated render canvas. |
| StudioCMS is a server-side-rendered, Astro native, headless content management system. Versions prior to 0.2.0 contain a Broken Object Level Authorization (BOLA) vulnerability in the Content Management feature that allows users with the "Visitor" role to access draft content created by Editor/Admin/Owner users. Version 0.2.0 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix locking in pdc_iodc_print() firmware call
Utilize pdc_lock spinlock to protect parallel modifications of the
iodc_dbuf[] buffer, check length to prevent buffer overflow of
iodc_dbuf[], drop the iodc_retbuf[] buffer and fix some wrong
indentings. |
| Unraid 6.8.0 allows authentication bypass. |
| Protection mechanism failure in Windows Shell allows an unauthorized attacker to bypass a security feature over a network. |
| Binding to an unrestricted ip address in Azure IoT Explorer allows an unauthorized attacker to disclose information over a network. |
| Protection mechanism failure in MSHTML Framework allows an unauthorized attacker to bypass a security feature over a network. |
| WWBN AVideo is an open source video platform. Prior to version 24.0, the official docker-compose.yml publishes the memcached service on host port 11211 (0.0.0.0:11211) with no authentication, while the Dockerfile configures PHP to store all user sessions in that memcached instance. An attacker who can reach port 11211 can read, modify, or flush session data — enabling session hijacking, admin impersonation, and mass session destruction without any application-level authentication. This issue has been patched in version 24.0. |
| Unallocated memory access vulnerability in print processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / Generic FAX Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver |
