| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix use-after-free due to enslave fail after slave array update
Fix a use-after-free which happens due to enslave failure after the new
slave has been added to the array. Since the new slave can be used for Tx
immediately, we can use it after it has been freed by the enslave error
cleanup path which frees the allocated slave memory. Slave update array is
supposed to be called last when further enslave failures are not expected.
Move it after xdp setup to avoid any problems.
It is very easy to reproduce the problem with a simple xdp_pass prog:
ip l add bond1 type bond mode balance-xor
ip l set bond1 up
ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass
ip l add dumdum type dummy
Then run in parallel:
while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done;
mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn"
The crash happens almost immediately:
[ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI
[ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf]
[ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary)
[ 605.602979] Tainted: [B]=BAD_PAGE
[ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210
[ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89
[ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213
[ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000
[ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be
[ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c
[ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000
[ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84
[ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000
[ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0
[ 605.603373] Call Trace:
[ 605.603392] <TASK>
[ 605.603410] __dev_queue_xmit+0x448/0x32a0
[ 605.603434] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603461] ? __pfx_vprintk_emit+0x10/0x10
[ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10
[ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603546] ? _printk+0xcb/0x100
[ 605.603566] ? __pfx__printk+0x10/0x10
[ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603627] ? add_taint+0x5e/0x70
[ 605.603648] ? add_taint+0x2a/0x70
[ 605.603670] ? end_report.cold+0x51/0x75
[ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding]
[ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix UAF in xchk_btree_check_block_owner
We cannot dereference bs->cur when trying to determine if bs->cur
aliases bs->sc->sa.{bno,rmap}_cur after the latter has been freed.
Fix this by sampling before type before any freeing could happen.
The correct temporal ordering was broken when we removed xfs_btnum_t. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix UAF issue for file-backed mounts w/ directio option
[ 9.269940][ T3222] Call trace:
[ 9.269948][ T3222] ext4_file_read_iter+0xac/0x108
[ 9.269979][ T3222] vfs_iocb_iter_read+0xac/0x198
[ 9.269993][ T3222] erofs_fileio_rq_submit+0x12c/0x180
[ 9.270008][ T3222] erofs_fileio_submit_bio+0x14/0x24
[ 9.270030][ T3222] z_erofs_runqueue+0x834/0x8ac
[ 9.270054][ T3222] z_erofs_read_folio+0x120/0x220
[ 9.270083][ T3222] filemap_read_folio+0x60/0x120
[ 9.270102][ T3222] filemap_fault+0xcac/0x1060
[ 9.270119][ T3222] do_pte_missing+0x2d8/0x1554
[ 9.270131][ T3222] handle_mm_fault+0x5ec/0x70c
[ 9.270142][ T3222] do_page_fault+0x178/0x88c
[ 9.270167][ T3222] do_translation_fault+0x38/0x54
[ 9.270183][ T3222] do_mem_abort+0x54/0xac
[ 9.270208][ T3222] el0_da+0x44/0x7c
[ 9.270227][ T3222] el0t_64_sync_handler+0x5c/0xf4
[ 9.270253][ T3222] el0t_64_sync+0x1bc/0x1c0
EROFS may encounter above panic when enabling file-backed mount w/
directio mount option, the root cause is it may suffer UAF in below
race condition:
- z_erofs_read_folio wq s_dio_done_wq
- z_erofs_runqueue
- erofs_fileio_submit_bio
- erofs_fileio_rq_submit
- vfs_iocb_iter_read
- ext4_file_read_iter
- ext4_dio_read_iter
- iomap_dio_rw
: bio was submitted and return -EIOCBQUEUED
- dio_aio_complete_work
- dio_complete
- dio->iocb->ki_complete (erofs_fileio_ki_complete())
- kfree(rq)
: it frees iocb, iocb.ki_filp can be UAF in file_accessed().
- file_accessed
: access NULL file point
Introduce a reference count in struct erofs_fileio_rq, and initialize it
as two, both erofs_fileio_ki_complete() and erofs_fileio_rq_submit() will
decrease reference count, the last one decreasing the reference count
to zero will free rq. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: fix error propagation in efivar_entry_get()
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock. |
| Godot MCP is a Model Context Protocol (MCP) server for interacting with the Godot game engine. Prior to version 0.1.1, a command injection vulnerability in godot-mcp allows remote code execution. The executeOperation function passed user-controlled input (e.g., projectPath) directly to exec(), which spawns a shell. An attacker could inject shell metacharacters like $(command) or &calc to execute arbitrary commands with the privileges of the MCP server process. This affects any tool that accepts projectPath, including create_scene, add_node, load_sprite, and others. This issue has been patched in version 0.1.1. |
| MCP TypeScript SDK is the official TypeScript SDK for Model Context Protocol servers and clients. From version 1.10.0 to 1.25.3, cross-client response data leak when a single McpServer/Server and transport instance is reused across multiple client connections, most commonly in stateless StreamableHTTPServerTransport deployments. This issue has been patched in version 1.26.0. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: virtuser: fix UAF in configfs release path
The gpio-virtuser configfs release path uses guard(mutex) to protect
the device structure. However, the device is freed before the guard
cleanup runs, causing mutex_unlock() to operate on freed memory.
Specifically, gpio_virtuser_device_config_group_release() destroys
the mutex and frees the device while still inside the guard(mutex)
scope. When the function returns, the guard cleanup invokes
mutex_unlock(&dev->lock), resulting in a slab use-after-free.
Limit the mutex lifetime by using a scoped_guard() only around the
activation check, so that the lock is released before mutex_destroy()
and kfree() are called. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in xtemos WoodMart woodmart allows PHP Local File Inclusion.This issue affects WoodMart: from n/a through < 8.3.2. |
| A flaw was found in linux-pam. The module pam_namespace may use access user-controlled paths without proper protection, allowing local users to elevate their privileges to root via multiple symlink attacks and race conditions. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Fix potential OOB access in audio mixer handling
In the audio mixer handling code of ctxfi driver, the conf field is
used as a kind of loop index, and it's referred in the index callbacks
(amixer_index() and sum_index()).
As spotted recently by fuzzers, the current code causes OOB access at
those functions.
| UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48
| index 8 is out of range for type 'unsigned char [8]'
After the analysis, the cause was found to be the lack of the proper
(re-)initialization of conj field.
This patch addresses those OOB accesses by adding the proper
initializations of the loop indices. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
Patch series "mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted
merge", v2.
Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
However, it is handling merges incorrectly when it comes to mremap() of a
faulted VMA adjacent to an unfaulted VMA. The issues arise in three
cases:
1. Previous VMA unfaulted:
copied -----|
v
|-----------|.............|
| unfaulted |(faulted VMA)|
|-----------|.............|
prev
2. Next VMA unfaulted:
copied -----|
v
|.............|-----------|
|(faulted VMA)| unfaulted |
|.............|-----------|
next
3. Both adjacent VMAs unfaulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| unfaulted |
|-----------|.............|-----------|
prev next
This series fixes each of these cases, and introduces self tests to assert
that the issues are corrected.
I also test a further case which was already handled, to assert that my
changes continues to correctly handle it:
4. prev unfaulted, next faulted:
copied -----|
v
|-----------|.............|-----------|
| unfaulted |(faulted VMA)| faulted |
|-----------|.............|-----------|
prev next
This bug was discovered via a syzbot report, linked to in the first patch
in the series, I confirmed that this series fixes the bug.
I also discovered that we are failing to check that the faulted VMA was
not forked when merging a copied VMA in cases 1-3 above, an issue this
series also addresses.
I also added self tests to assert that this is resolved (and confirmed
that the tests failed prior to this).
I also cleaned up vma_expand() as part of this work, renamed
vma_had_uncowed_parents() to vma_is_fork_child() as the previous name was
unduly confusing, and simplified the comments around this function.
This patch (of 4):
Commit 879bca0a2c4f ("mm/vma: fix incorrectly disallowed anonymous VMA
merges") introduced the ability to merge previously unavailable VMA merge
scenarios.
The key piece of logic introduced was the ability to merge a faulted VMA
immediately next to an unfaulted VMA, which relies upon dup_anon_vma() to
correctly handle anon_vma state.
In the case of the merge of an existing VMA (that is changing properties
of a VMA and then merging if those properties are shared by adjacent
VMAs), dup_anon_vma() is invoked correctly.
However in the case of the merge of a new VMA, a corner case peculiar to
mremap() was missed.
The issue is that vma_expand() only performs dup_anon_vma() if the target
(the VMA that will ultimately become the merged VMA): is not the next VMA,
i.e. the one that appears after the range in which the new VMA is to be
established.
A key insight here is that in all other cases other than mremap(), a new
VMA merge either expands an existing VMA, meaning that the target VMA will
be that VMA, or would have anon_vma be NULL.
Specifically:
* __mmap_region() - no anon_vma in place, initial mapping.
* do_brk_flags() - expanding an existing VMA.
* vma_merge_extend() - expanding an existing VMA.
* relocate_vma_down() - no anon_vma in place, initial mapping.
In addition, we are in the unique situation of needing to duplicate
anon_vma state from a VMA that is neither the previous or next VMA being
merged with.
dup_anon_vma() deals exclusively with the target=unfaulted, src=faulted
case. This leaves four possibilities, in each case where the copied VMA
is faulted:
1. Previous VMA unfaulted:
copied -----|
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones. |
| In the Linux kernel, the following vulnerability has been resolved:
fou: Don't allow 0 for FOU_ATTR_IPPROTO.
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO. |
| Apollo Server is an open-source, spec-compliant GraphQL server that's compatible with any GraphQL client, including Apollo Client. In versions from 2.0.0 to 3.13.0, 4.2.0 to before 4.13.0, and 5.0.0 to before 5.4.0, the default configuration of startStandaloneServer from @apollo/server/standalone is vulnerable to denial of service (DoS) attacks through specially crafted request bodies with exotic character set encodings. This issue does not affect users that use @apollo/server as a dependency for integration packages, like @as-integrations/express5 or @as-integrations/next, only direct usage of startStandaloneServer. |
| An improper neutralization of argument delimiters in a command vulnerability has been reported to affect several QNAP operating system versions. The remote attackers can then exploit the vulnerability to alter execution logic.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3297 build 20251024 and later
QuTS hero h5.2.7.3297 build 20251024 and later
QuTS hero h5.3.1.3292 build 20251024 and later |
| OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. Prior to version 1.6.3-alpha, multiple storage helpers used path construction patterns that did not uniformly enforce base-directory containment. This created path-injection risk in file read/write/delete flows if malicious path-like values were introduced. This issue has been patched in version 1.6.3-alpha. |
| OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. Prior to version 1.6.3-alpha, the URL ingest pipeline accepted user-controlled remote URLs with incomplete destination restrictions. Although private/local host checks existed, missing restrictions for credentialed URLs, non-standard ports, and cross-host redirects left SSRF-class abuse paths in non-localhost deployments. This issue has been patched in version 1.6.3-alpha. |
| A vulnerability was found in Buildah. Cache mounts do not properly validate that user-specified paths for the cache are within our cache directory, allowing a `RUN` instruction in a Container file to mount an arbitrary directory from the host (read/write) into the container as long as those files can be accessed by the user running Buildah. |
