| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| A vulnerability in the IPsec code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of malformed IPsec packets. An attacker could exploit this vulnerability by sending malformed IPsec packets to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. An attacker needs to establish a valid IPsec tunnel before exploiting this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.8) 9.2(4.15) 9.4(4) 9.5(3.2) 9.6(2). Cisco Bug IDs: CSCun16158. |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
| A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685. |
| The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344. |
| A vulnerability in the HTTP web-based management interface of the Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to inject arbitrary XML commands on the affected system. More Information: CSCva38556. Known Affected Releases: 9.1(6.10). Known Fixed Releases: 100.11(0.75) 100.15(0.137) 100.8(40.129) 96.2(0.95) 97.1(0.55) 97.1(12.7) 97.1(6.30). |
| A vulnerability in the Identity Firewall feature of Cisco ASA Software before 9.6(2.1) could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to a buffer overflow in the affected code area. An attacker could exploit this vulnerability by sending a crafted NetBIOS packet in response to a NetBIOS probe sent by the ASA software. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or cause a reload of the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 traffic. |
| The DHCP Relay implementation in Cisco Adaptive Security Appliance (ASA) Software 8.4.7.29 and 9.1.7.4 allows remote attackers to cause a denial of service (interface wedge) via a crafted rate of DHCP packet transmission, aka Bug ID CSCuy66942. |
| The XML parser in Cisco Adaptive Security Appliance (ASA) Software through 9.5.2 allows remote authenticated users to cause a denial of service (instability, memory consumption, or device reload) by leveraging (1) administrative access or (2) Clientless SSL VPN access to provide a crafted XML document, aka Bug ID CSCut14209. |
| Cisco Adaptive Security Appliance (ASA) Software 8.4(.6) and earlier, when using an unsupported configuration with overlapping criteria for filtering and inspection, allows remote attackers to cause a denial of service (traffic loop and device crash) via a packet that triggers multiple matches, aka Bug ID CSCui45606. |
| Cisco Adaptive Security Appliance (ASA) Software 8.2 through 9.4.3.3 allows remote attackers to bypass intended ICMP Echo Reply ACLs via vectors related to subtypes. |
| A vulnerability in the local Certificate Authority (CA) feature of Cisco ASA Software before 9.6(1.5) could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper handling of crafted packets during the enrollment operation. An attacker could exploit this vulnerability by sending a crafted enrollment request to the affected system. An exploit could allow the attacker to cause the reload of the affected system. Note: Only HTTPS packets directed to the Cisco ASA interface, where the local CA is allowing user enrollment, can be used to trigger this vulnerability. This vulnerability affects systems configured in routed firewall mode and in single or multiple context mode. |
| Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019. |
| The DCERPC Inspection implementation in Cisco Adaptive Security Appliance (ASA) Software 9.4.1 through 9.5.1 allows remote authenticated users to bypass an intended DCERPC-only ACL by sending arbitrary network traffic, aka Bug ID CSCuu67782. |
| Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote attackers to obtain sensitive information via an AnyConnect authentication attempt, aka Bug ID CSCuo65775. |
| The encryption-processing feature in Cisco libSRTP before 1.5.3 allows remote attackers to cause a denial of service via crafted fields in SRTP packets, aka Bug ID CSCux00686. |
| The IKEv1 implementation in Cisco Adaptive Security Appliance (ASA) software 7.2 and 8.2 before 8.2(5.58), 8.3 and 8.4 before 8.4(7.29), 8.5 through 8.7 before 8.7(1.17), 9.0 before 9.0(4.37), 9.1 before 9.1(6.8), 9.2 before 9.2(4), and 9.3 before 9.3(3) allows remote attackers to cause a denial of service (device reload) via crafted ISAKMP UDP packets, aka Bug ID CSCus94026. |
| The XML parser in the management interface in Cisco Adaptive Security Appliance (ASA) Software 8.4 allows remote authenticated users to cause a denial of service (device crash) via a crafted XML document, aka Bug ID CSCut14223. |
