| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out of bounds read in Blink in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: High) |
| Out of bounds read and write in WebAudio in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Out-of-bounds read in ALPN parsing due to incomplete validation. wolfSSL 5.8.4 and earlier contained an out-of-bounds read in ALPN handling when built with ALPN enabled (HAVE_ALPN / --enable-alpn). A crafted ALPN protocol list could trigger an out-of-bounds read, leading to a potential process crash (denial of service). Note that ALPN is disabled by default, but is enabled for these 3rd party compatibility features: enable-apachehttpd, enable-bind, enable-curl, enable-haproxy, enable-hitch, enable-lighty, enable-jni, enable-nginx, enable-quic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential array out of bounds access
Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying
key_len size in iwl_mvm_sec_key_add(). |
| A vulnerability was found in libxml2. Processing certain sch:name elements from the input XML file can trigger a memory corruption issue. This flaw allows an attacker to craft a malicious XML input file that can lead libxml to crash, resulting in a denial of service or other possible undefined behavior due to sensitive data being corrupted in memory. |
| A flaw was found in GNU Binutils. This vulnerability, a heap-based buffer overflow, specifically an out-of-bounds read, exists in the bfd linker component. An attacker could exploit this by convincing a user to process a specially crafted malicious XCOFF object file. Successful exploitation may lead to the disclosure of sensitive information or cause the application to crash, resulting in an application level denial of service. |
| A flaw was found in GNU Binutils. This heap-based buffer overflow vulnerability, specifically an out-of-bounds read in the bfd linker, allows an attacker to gain access to sensitive information. By convincing a user to process a specially crafted XCOFF object file, an attacker can trigger this flaw, potentially leading to information disclosure or an application level denial of service. |
| 1-byte OOB heap read in wc_PKCS7_DecodeEnvelopedData via zero-length encrypted content. A vulnerability existed in wolfSSL 5.8.4 and earlier, where a 1-byte out-of-bounds heap read in wc_PKCS7_DecodeEnvelopedData could be triggered by a crafted CMS EnvelopedData message with zero-length encrypted content. Note that PKCS7 support is disabled by default. |
| A vulnerability has been found in jarikomppa soloud up to 20200207. Impacted is the function drwav_read_pcm_frames_s16__msadpcm in the library src/audiosource/wav/dr_wav.h of the component WAV File Parser. The manipulation leads to out-of-bounds read. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. Upgrading to version 20200207 is recommended to address this issue. It is recommended to upgrade the affected component. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in rxi fe up to ed4cda96bd582cbb08520964ba627efb40f3dd91. The impacted element is the function read_ of the file src/fe.c. This manipulation with the input 1 causes out-of-bounds read. The attack requires local access. The exploit has been publicly disclosed and may be utilized. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| An Out-of-Bounds
Read vulnerability exists in the ASUS Business System
Control Interface driver. This vulnerability can be triggered by an unprivileged local user
sending a specially crafted IOCTL request, potentially leading
to a disclosure of
kernel information or a system crash. Refer to the "Security Update for ASUS
Business System Control Interface" section on the ASUS Security Advisory for more information. |
| A vulnerability was determined in strukturag libheif up to 1.21.2. This affects the function vvdec_push_data2 of the file libheif/plugins/decoder_vvdec.cc of the component HEIF File Parser. Executing a manipulation of the argument size can lead to out-of-bounds read. The attack needs to be launched locally. The exploit has been publicly disclosed and may be utilized. This patch is called b97c8b5f198b27f375127cd597a35f2113544d03. It is advisable to implement a patch to correct this issue. |
| A vulnerability was identified in strukturag libheif up to 1.21.2. This impacts the function Track::load of the file libheif/sequences/track.cc of the component stsz/stts. The manipulation leads to out-of-bounds read. The attack needs to be performed locally. The exploit is publicly available and might be used. Applying a patch is the recommended action to fix this issue. The patch available is inofficial and not approved yet. |
| Easy Grade Pro 4.1.0.2 contains a file parsing logic flaw in the handling of proprietary .EGP gradebook files. By modifying specific fields at precise offsets within an otherwise valid .EGP file, an attacker can trigger an out-of-bounds memory read during parsing. This results in an unhandled access violation and application crash, leading to a local denial-of-service condition when the crafted file is opened by a user. |
| A flaw was found in libarchive. This heap out-of-bounds read vulnerability exists in the RAR archive processing logic due to improper validation of the LZSS sliding window size after transitions between compression methods. A remote attacker can exploit this by providing a specially crafted RAR archive, leading to the disclosure of sensitive heap memory information without requiring authentication or user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains
Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove(). |
| HTSlib is a library for reading and writing bioinformatics file formats. CRAM is a compressed format which stores DNA sequence alignment data. While most alignment records store DNA sequence and quality values, the format also allows them to omit this data in certain cases to save space. Due to some quirks of the CRAM format, it is necessary to handle these records carefully as they will actually store data that needs to be consumed and then discarded. Unfortunately the `cram_decode_seq()` did not handle this correctly in some cases. Where this happened it could result in reading a single byte from beyond the end of a heap allocation, followed by writing a single attacker-controlled byte to the same location. Exploiting this bug causes a heap buffer overflow. If a user opens a file crafted to exploit this issue, it could lead to the program crashing, or overwriting of data and heap structures in ways not expected by the program. It may be possible to use this to obtain arbitrary code execution. Versions 1.23.1, 1.22.2 and 1.21.1 include fixes for this issue. There is no workaround for this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221 |
| A flaw was found in the cookie date handling logic of the libsoup HTTP library, widely used by GNOME and other applications for web communication. When processing cookies with specially crafted expiration dates, the library may perform an out-of-bounds memory read. This flaw could result in unintended disclosure of memory contents, potentially exposing sensitive information from the process using libsoup. |
